CODEWITHSUNDEEP
wcfiis
kipusoep
kipusoep

Reputation: 2232

(413) Request Entity Too Large | uploadReadAheadSize

I've written a WCF service with .NET 4.0, which is hosted on my Windows 7 x64 Ultimate system with IIS 7.5. One of the service methods has an 'object' as argument and I'm trying to send a byte[] which contains a picture. As long as the file size of this picture is less then approx. 48KB, all goes well. But if I'm trying to upload a larger picture, the WCF service returns an error: (413) Request Entity Too Large. So ofcourse I've spent 3 hours Googling the error message and every topic I've seen about this subject suggests raising the 'uploadReadAheadSize' property. So what I've done is using the following commands (10485760 = 10MB):

"appcmd.exe set config -section:system.webserver/serverruntime/uploadreadaheadsize: 10485760 /commit:apphost"

"cscript adsutil.vbs set w3svc/<APP_ID>/uploadreadaheadsize 10485760"

I've also used IIS Manager to set the value by opening the site and going to "Configuration Editor" under Management. Unfortunately I'm still getting the Request Entity Too Large error and it's getting really frustrating!

So does anybody know what else I can try to fix this error?

Upvotes: 161

Views: 314248

Answers (17)

Coskun Ozogul
Coskun Ozogul

Reputation: 2469

I want to share my experience in case anyone has the same issue.

Having the (413) Request Entity Too Large message, I tried all the responses above. At the end, the upload limit was increased but I was still having the same message for some files randomly.

Here is my web config file content:

 <services>
   //Corresponds to my service name, if there is a namespace, it must be indicated. like MyNameSpace.MyWcfService.
    <service name="MyWcfService">
        <endpoint
        binding="basicHttpsBinding" //For https configuration. Can be http according to the situation.
        name="cadelioDefaultConfig"
        bindingConfiguration="myAppMaxTransportBinding" //The exact name of the binding configuration defined below.
        contract="IService" />
        
            <endpoint address="mex"
            binding="mexHttpsBinding" 
            contract="IMetadataExchange" />
    
    </service>
</services>

<behaviors>
    <serviceBehaviors>
        <behavior>
            <serviceMetadata 
            httpGetEnabled="true" 
            httpsGetEnabled="true" />
            <serviceDebug includeExceptionDetailInFaults="true" />
            <useRequestHeadersForMetadataAddress />
        </behavior>
    </serviceBehaviors>
</behaviors>

<protocolMapping>
    <add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>

<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />

<bindings>
    <basicHttpsBinding> //Https binding, can be http accordin to the situation.
        <binding 
        name="myAppMaxTransportBinding" 
        closeTimeout="00:10:00"
        openTimeout="00:10:00"
        receiveTimeout="01:00:00" 
        sendTimeout="01:00:00" 
        maxBufferPoolSize="2147483647"
        maxBufferSize="2147483647"
        maxReceivedMessageSize="2147483647"
        transferMode="Streamed">

            <readerQuotas maxStringContentLength="2147483647"
            maxArrayLength="2147483647" 
            maxBytesPerRead="2147483647" 
            maxDepth="2147483647" 
            maxNameTableCharCount="2147483647" />

        </binding>
    </basicHttpsBinding>
</bindings>

Still the same message at the end but not always.

I realised that when the file was larger than 30 MB, I was still getting this error after all I tried in my webconfig file.

Finally, I found that in IIS, in the Request filtering section, there is an upload limit by default 30000000 bytes.

I opened the Request filtering page, edited the Feature Settings and put the limit I need.

And bingo.

enter image description here

enter image description here

Upvotes: 0

G.D.Carter
G.D.Carter

Reputation: 209

Just in case anyone has an Application Request router in front of their application make sure that you are adjusting the settings for and there as well.

Upvotes: -1

Kevin
Kevin

Reputation: 2406

Glued a lot of responses together will ALL info I needed:

IIS Config: C:\Windows\System32\inetsrv\config\applicationHost.config (very bottom)

<?xml version="1.0" encoding="UTF-8"?>
<configuration>
...
<location path="Default Web Site">
        <system.webServer>
            <security>
                <access sslFlags="SslNegotiateCert" />
                <!-- Max upload size in bytes -->
                <requestFiltering>
                     <requestLimits maxAllowedContentLength="104857600" />
                </requestFiltering>
            </security>
        </system.webServer>
    </location>
</configuration>

Upvotes: 1

Luke
Luke

Reputation: 23680

I was receiving this error message, even though I had the max settings set within the binding of my WCF service config file:

<basicHttpBinding>
        <binding name="NewBinding1"
                 receiveTimeout="01:00:00"
                 sendTimeout="01:00:00"
                 maxBufferSize="2000000000"
                 maxReceivedMessageSize="2000000000">

                 <readerQuotas maxDepth="2000000000"
                      maxStringContentLength="2000000000"
                      maxArrayLength="2000000000" 
                      maxBytesPerRead="2000000000" 
                      maxNameTableCharCount="2000000000" />
        </binding>
</basicHttpBinding>

It seemed as though these binding settings weren't being applied, thus the following error message:

IIS7 - (413) Request Entity Too Large when connecting to the service.

The Problem

I realised that the name="" attribute within the <service> tag of the web.config is not a free text field, as I thought it was. It is the fully qualified name of an implementation of a service contract as mentioned within this documentation page.

If that doesn't match, then the binding settings won't be applied!

<services>
  <!-- The namespace appears in the 'name' attribute -->
  <service name="Your.Namespace.ConcreteClassName">
    <endpoint address="http://localhost/YourService.svc"
      binding="basicHttpBinding" bindingConfiguration="NewBinding1"
      contract="Your.Namespace.IConcreteClassName" />
  </service>
</services>

I hope that saves someone some pain...

Upvotes: 28

Liam Kernighan
Liam Kernighan

Reputation: 2525

My problem has gone after I added this:

  <system.webServer>
        <security>
            <requestFiltering>
                <requestLimits
                    maxAllowedContentLength="104857600"
                />
            </requestFiltering>
        </security>
  </system.webServer>

Upvotes: 3

Ogglas
Ogglas

Reputation: 69928

Got a similar error on IIS Express with Visual Studio 2017.

HTTP Error 413.0 - Request Entity Too Large

The page was not displayed because the request entity is too large.

Most likely causes:

  • The Web server is refusing to service the request because the request entity is too large.

  • The Web server cannot service the request because it is trying to negotiate a client certificate but the request entity is too large.

  • The request URL or the physical mapping to the URL (i.e., the physical file system path to the URL's content) is too long.

Things you can try:

  • Verify that the request is valid.

  • If using client certificates, try:

    • Increasing system.webServer/serverRuntime@uploadReadAheadSize

    • Configure your SSL endpoint to negotiate client certificates as part of the initial SSL handshake. (netsh http add sslcert ... clientcertnegotiation=enable) .vs\config\applicationhost.config

Solve this by editing \.vs\config\applicationhost.config. Switch serverRuntime from Deny to Allow like this:

<section name="serverRuntime" overrideModeDefault="Allow" />

If this value is not edited, you will get an error like this when setting uploadReadAheadSize:

HTTP Error 500.19 - Internal Server Error

The requested page cannot be accessed because the related configuration data for the page is invalid.

This configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"), or set explicitly by a location tag with overrideMode="Deny" or the legacy allowOverride="false".

Then edit Web.config with the following values: 

<system.webServer>
  <serverRuntime uploadReadAheadSize="10485760" />
...

Upvotes: 2

Vladimir Venegas
Vladimir Venegas

Reputation: 4183

In my case, I was getting this error message because I was changed the service's namespace and services tag was pointed to the older namespace. I refreshed the namespace and the error disapear:

<services>
  <service name="My.Namespace.ServiceName"> <!-- Updated name -->
    <endpoint address="" 
              binding="wsHttpBinding" 
              bindingConfiguration="MyBindingConfiguratioName" 
              contract="My.Namespace.Interface" <!-- Updated contract -->
    />
  </service>
</services>

Upvotes: 3

asawin
asawin

Reputation: 11

for issue the remote server returned an unexpected response: (413) Request Entity Too Large on WCF with Resful

please see my explain configuration

</client>
<serviceHostingEnvironment multipleSiteBindingsEnabled="false" aspNetCompatibilityEnabled="true"/>

<bindings>

   <!-- this for restfull service -->
  <webHttpBinding>
    <binding name="RestfullwebHttpBinding"
      maxBufferPoolSize="2147483647"
      maxReceivedMessageSize="2147483647"
      maxBufferSize="2147483647" transferMode="Streamed">

      <readerQuotas 
        maxDepth="2147483647" 
        maxStringContentLength="2147483647"
        maxArrayLength="2147483647" 
        maxBytesPerRead="2147483647" /> 

    </binding>
  </webHttpBinding>
  <!-- end -->

   <!-- this for Soap v.2 -->
  <wsHttpBinding>
    <binding name="wsBinding1" maxReceivedMessageSize="2147483647" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
      <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/>
      <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false"/>
      <!--UsernameToken over Transport Security-->
      <security mode="TransportWithMessageCredential">
        <message clientCredentialType="UserName" establishSecurityContext="true"/>
      </security>
    </binding>
  </wsHttpBinding>
   <!-- this for restfull service -->

   <!-- this for Soap v.1 -->
  <basicHttpBinding>
    <binding name="basicBinding1" maxReceivedMessageSize="2147483647" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false" transferMode="Streamed">
      <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647"/>
      <security mode="None"/>
    </binding>
  </basicHttpBinding>
</bindings> 
<!-- end -->

<services>
  <clear/>

  <service name="ING.IWCFService.CitisecHashTransfer"  >
    <endpoint address="http://localhost:8099/CitisecHashTransfer.svc"
                  behaviorConfiguration="RestfullEndpointBehavior"
                  binding="webHttpBinding"
                  bindingConfiguration="RestfullwebHttpBinding"
                  name="ICitisecHashTransferBasicHttpBinding"
                  contract="ING.IWCFService.ICitisecHashTransfer" />
  </service>

</services>
<behaviors>
  <serviceBehaviors>
    <behavior name="ServiceBehavior">
      <serviceMetadata httpsGetEnabled="true"/>
      <serviceDebug includeExceptionDetailInFaults="true"/>
      <dataContractSerializer maxItemsInObjectGraph="2147483647"/>

      <serviceCredentials>
        <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType="ING.IWCFService.IWCFServiceValidator, ING.IWCFService"/>
      </serviceCredentials>
      <serviceSecurityAudit auditLogLocation="Application" serviceAuthorizationAuditLevel="SuccessOrFailure" messageAuthenticationAuditLevel="SuccessOrFailure"/>
      <serviceThrottling maxConcurrentCalls="1000" maxConcurrentSessions="100" maxConcurrentInstances="1000"/>

    </behavior>
    <behavior>
      <serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>
      <serviceDebug includeExceptionDetailInFaults="true"/>
      <dataContractSerializer maxItemsInObjectGraph="2147483647"/>
    </behavior>
  </serviceBehaviors>
  <endpointBehaviors>
    <behavior name="EndpointBehavior">
      <dataContractSerializer maxItemsInObjectGraph="2147483647" />
    </behavior> 
    <behavior name="RestfullEndpointBehavior">
      <dataContractSerializer maxItemsInObjectGraph="2147483647"  />
      <webHttp/>
    </behavior> 
  </endpointBehaviors>
</behaviors>

Upvotes: 1

revers
revers

Reputation: 31

For me, setting the uploadReadAheadSize to int.MaxValue also fixed the problem, after also increasing the limits on the WCF binding.

It seems that, when using SSL, the entire request entity body is preloaded, for which this metabase property is used.

For more info, see:

The page was not displayed because the request entity is too large. iis7

Upvotes: 3

rekna
rekna

Reputation: 5333

I've been able to solve this by executing a dummy call ( e.g. IsAlive returning true ) just before the request with large content on the same wcf channel/client. Apparently ssl negotation is done on the first call. So no need to increase Uploadreadaheadsize.

Upvotes: 2

Tom P
Tom P

Reputation: 309

I had the same problem and setting the uploadReadAheadSize solved it:

http://www.iis.net/configreference/system.webserver/serverruntime

"The value must be between 0 and 2147483647."

It is easily set it in the applicationHost.config-fle if you don't want to do a cmd-thing.

Its located in WindowsFOLDER\System32\inetsrv\config (2008 server).

You must open it with notepad. Do a Backup of the file first.

According to the comments in config the recommended way to unlock sections is by using a location tag:

<location path="Default Web Site" overrideMode="Allow">
    <system.webServer>
        <asp />
    </system.webServer>
</location>"

So you can write in the bottom (since it doesn't exist before). I write maxvalue here - write your own value if you want.

<location path="THENAMEOFTHESITEYOUHAVE" overrideMode="Allow">
    <system.webServer>
        <asp />
        <serverRuntime uploadReadAheadSize="2147483647" />
    </system.webServer>
</location>

If you put it last before </configuration> for example, you know where you have it.

Hope that solves your problems. It was an SSL overhead issue for me, where too much post freezed the application, raising a (413) Request Entity Too Large error.

Upvotes: 30

oconnerj
oconnerj

Reputation: 326

If you're running into this issue despite trying all of the solutions in this thread, and you're connecting to the service via SSL (e.g. https), this might help:

http://forums.newatlanta.com/messages.cfm?threadid=554611A2-E03F-43DB-92F996F4B6222BC0&#top

To summarize (in case the link dies in the future), if your requests are large enough the certificate negotiation between the client and the service will fail randomly. To keep this from happening, you'll need to enable a certain setting on your SSL bindings. From your IIS server, here are the steps you'll need to take:

  1. Via cmd or powershell, run netsh http show sslcert. This will give you your current configuration. You'll want to save this somehow so you can reference it again later.
  2. You should notice that "Negotiate Client Certificate" is disabled. This is the problem setting; the following steps will demonstrate how to enable it.
  3. Unfortunately there is no way to change existing bindings; you'll have to delete it and re-add it. Run netsh http delete sslcert <ipaddress>:<port> where <ipaddress>:<port> is the IP:port shown in the configuration you saved earlier.
  4. Now you can re-add the binding. You can view the valid parameters for netsh http add sslcert here (MSDN) but in most cases your command will look like this:

netsh http add sslcert ipport=<ipaddress>:<port> appid=<application ID from saved config including the {}> certhash=<certificate hash from saved config> certstorename=<certificate store name from saved config> clientcertnegotiation=enable

If you have multiple SSL bindings, you'll repeat the process for each of them. Hopefully this helps save someone else the hours and hours of headache this issue caused me.

EDIT: In my experience, you can't actually run the netsh http add sslcert command from the command line directly. You'll need to enter the netsh prompt first by typing netsh and then issue your command like http add sslcert ipport=... in order for it to work.

Upvotes: 12

Anas
Anas

Reputation: 5727

This helped me to resolve the problem (one line - split for readability / copy-ability):

C:\Windows\System32\inetsrv\appcmd  set config "YOUR_WEBSITE_NAME" 
     -section:system.webServer/serverRuntime /uploadReadAheadSize:"2147483647" 
     /commit:apphost

Upvotes: 9

Han Evers
Han Evers

Reputation: 21

In my case I had to increase the "Maximum received message size" of the Receive Location in BizTalk. That also has a default value of 64K and so every message was bounced by BizTAlk regardless of what I configured in my web.config

Upvotes: 2

Riccardo Gozzi
Riccardo Gozzi

Reputation: 31

For anyone else ever looking for an IIS WCF error 413 : Request entity to large and using a WCF service in Sharepoint, this is the information for you. The settings in the application host and web.config suggested in other sites/posts don't work in SharePoint if using the MultipleBaseAddressBasicHttpBindingServiceHostFactory. You can use SP Powershell to get the SPWebService.Content service, create a new SPWcvSettings object and update the settings as above for your service (they won't exist). Remember to just use the name of the service (e.g. [yourservice.svc]) when creating and adding the settings. See this site for more info https://robertsep.wordpress.com/2010/12/21/set-maximum-upload-filesize-sharepoint-wcf-service

Upvotes: 2

Robert Barrueco
Robert Barrueco

Reputation: 768

I was having the same issue with IIS 7.5 with a WCF REST Service. Trying to upload via POST any file above 65k and it would return Error 413 "Request Entity too large".

The first thing you need to understand is what kind of binding you've configured in the web.config. Here's a great article...

BasicHttpBinding vs WsHttpBinding vs WebHttpBinding

If you have a REST service then you need to configure it as "webHttpBinding". Here's the fix:

<system.serviceModel>

<bindings>
   <webHttpBinding>
    <binding 
      maxBufferPoolSize="2147483647" 
      maxReceivedMessageSize="2147483647" 
      maxBufferSize="2147483647" transferMode="Streamed">
    </binding>  
   </webHttpBinding>
</bindings>

Upvotes: 64

Ladislav Mrnka
Ladislav Mrnka

Reputation: 364249

That is not problem of IIS but the problem of WCF. WCF by default limits messages to 65KB to avoid denial of service attack with large messages. Also if you don't use MTOM it sends byte[] to base64 encoded string (33% increase in size) => 48KB * 1,33 = 64KB

To solve this issue you must reconfigure your service to accept larger messages. This issue previously fired 400 Bad Request error but in newer version WCF started to use 413 which is correct status code for this type of error.

You need to set maxReceivedMessageSize in your binding. You can also need to set readerQuotas.

<system.serviceModel>
  <bindings>
    <basicHttpBinding>
      <binding maxReceivedMessageSize="10485760">
        <readerQuotas ... />
      </binding>
    </basicHttpBinding>
  </bindings>  
</system.serviceModel>

Upvotes: 222

Related Questions