CODEWITHSUNDEEP
serial-portbeagleboarduart
Mandar Nandale
Mandar Nandale

Reputation: 43

Beagle Bone serial communication

I am working on Beagle Bone Rev A5 and my UART1 and UART2 are working fine with these mux settings:

echo 20 > /sys/kernel/debug/omap_mux/uart1_rxd
echo 0 > /sys/kernel/debug/omap_mux/uart1_txd
echo 1 > /sys/kernel/debug/omap_mux/spi0_d0
echo 21 > /sys/kernel/debug/omap_mux/spi0_sclk

Now I want hardware flow control enabled and for that I want to use UART4 and UART5. Can anybody help me enabling Rx,Tx,RTS,CTS of UART 4 & 5? What will be the mux setting for these UARTs?

Upvotes: 2

Views: 6415

Answers (1)

Tomap
Tomap

Reputation: 620

This page helped me a bit: http://www.jerome-bernard.com/blog/2012/06/04/beaglebone-serial-ports-and-xbees/

You have to set :

  • UART4 - RX /sys/kernel/debug/omap_mux/gpmc_wait0 26 Mode 6 - Input
  • UART4 - TX /sys/kernel/debug/omap_mux/gpmc_wpn 6 Mode 6 - Output
  • UART5 - RX /sys/kernel/debug/omap_mux/lcd_data9 24 Mode 4 - Input
  • UART5 - TX /sys/kernel/debug/omap_mux/lcd_data8 4 Mode 4 - Output

Upvotes: 2

Related Questions