CODEWITHSUNDEEP
cassemblyoperating-system
Dylan LaCoursiere
Dylan LaCoursiere

Reputation: 479

How does one load external code with a custom bootloader?

I'm writing my own operating system, and so far I'm only really able to write it in assembly, because I don't really understand how I would set it up with multiple files/languages. I've written bootloaders with executable code in them before, but what I don't understand is how to make the bootloader aware of other files outside of itself. How would I be able to write a bootloader in assembly and then tell it to load, say, a kernel written in C in a different file? Do I have to bundle the .o files from the compilation of the kernel into the fdd image and tell the bootloader to load/execute them or is it more complicated than that?

Upvotes: 0

Views: 380

Answers (1)

ThePosey
ThePosey

Reputation: 2734

Since it looks like you're trying to get the hang of system bring up it might be worthwhile to take a look at some "smaller" embedded systems to get a feel for what goes on once power is applied/chip comes out of reset. Take a look at U-Boot here: http://www.denx.de/wiki/U-Boot

It is a very popular bootloader especially for embedded systems and can launch a variety of OS's. The mainline supports a ton of different configurations as well. I think it is relatively straight forward to follow what happens during power up if you are comfortable with C.

To answer your question more specifically for instance with U-Boot you can either build parameters into the u-boot image as to where you are going to load your code, it can read where you image file is stored from a configuration file on powerup, u-boot can load a configuration automatically from your network somewhere, you can even tell u-boot where and what to load from its command line interface. Take a look and see if you have any further questions.

Upvotes: 1

Related Questions