CODEWITHSUNDEEP
node.js
JVG
JVG

Reputation: 21170

NodeJS - What does "socket hang up" actually mean?

I'm building a web scraper with Node and Cheerio, and for a certain website I'm getting the following error (it only happens on this one website, no others that I try to scrape.

It happens at a different location every time, so sometimes it's url x that throws the error, other times url x is fine and it's a different url entirely:

    Error!: Error: socket hang up using [insert random URL, it's different every time]

Error: socket hang up
    at createHangUpError (http.js:1445:15)
    at Socket.socketOnEnd [as onend] (http.js:1541:23)
    at Socket.g (events.js:175:14)
    at Socket.EventEmitter.emit (events.js:117:20)
    at _stream_readable.js:910:16
    at process._tickCallback (node.js:415:13)

This is very tricky to debug, I don't really know where to start. To begin, what IS a socket hang up error? Is it a 404 error or similar? Or does it just mean that the server refused a connection?

I can't find an explanation of this anywhere!

EDIT: Here's a sample of code that is (sometimes) returning errors:

function scrapeNexts(url, oncomplete) {
    request(url, function(err, resp, body) {

        if (err) {
            console.log("Uh-oh, ScrapeNexts Error!: " + err + " using " + url);
            errors.nexts.push(url);
        }
        $ = cheerio.load(body);
        // do stuff with the '$' cheerio content here
    });
}

There is no direct call to close the connection, but I'm using Node Request which (as far as I can tell) uses http.get so this is not required, correct me if I'm wrong!

EDIT 2: Here's an actual, in-use bit of code that is causing errors. prodURL and other variables are mostly jquery selectors that are defined earlier. This uses the async library for Node.

function scrapeNexts(url, oncomplete) {
    request(url, function (err, resp, body) {

        if (err) {
            console.log("Uh-oh, ScrapeNexts Error!: " + err + " using " + url);
            errors.nexts.push(url);
        }
        async.series([
                function (callback) {
                    $ = cheerio.load(body);
                    callback();
                },
                function (callback) {
                    $(prodURL).each(function () {
                        var theHref = $(this).attr('href');
                        urls.push(baseURL + theHref);
                    });
                    var next = $(next_select).first().attr('href');
                    oncomplete(next);
                }
            ]);
    });
}

Upvotes: 481

Views: 1085209

Answers (30)

salouri
salouri

Reputation: 831

in my case, the problem was simply because of returning response with status code 102 (Processing...)

Upvotes: 0

Kashif Ghafoor
Kashif Ghafoor

Reputation: 406

I was using axios in nodejs and faced sokcet hang up erorr while fetching data from a url.

const response = await axios.get(url)

it comes out that It was because of timeout error and I was not handling error.

So, I added timeout and error handling as show in following code snippet.

const response = await axios
      .get(url, { timeout: 10000 })
      .catch((error) => {
         if (axios.isAxiosError(error)) {
           const axiosError = error as AxiosError;
           console.log(message, axiosError.message);
           console.log(axiosError.response);
      });

So, handling error and specifying timeout solved the socket hangup problem for me.

Upvotes: 4

RenRen
RenRen

Reputation: 11407

I am using axios with x.509 certificate authentication

My request looks like this.

 async function callService() {

     const httpsAgent = new https.Agent({
         cert: fs.readFileSync('client.crt'),
         key: fs.readFileSync('client.key'),
         ca: fs.readFileSync('ca.crt'),
     });

     try {
         const result = await axios.post(
             'https://example.com/test/', 
             {"topic": 'home'}, 
             { httpsAgent: httpsAgent }
         );
     }
     catch (error) {
         console.log('error:', error)
     }

}

client.crt 
-----BEGIN CERTIFICATE-----
MIIDWjC....cME70g==
-----END CERTIFICATE-----

client.key
-----BEGIN RSA PRIVATE KEY-----
oBXxnIVby...qvdSsQ==
-----END RSA PRIVATE KEY-----

ca.crt
-----BEGIN CERTIFICATE-----
MIIDQ...8SQvvG5
-----END CERTIFICATE-----

I got the the error:

Error: socket hang up
at connResetException (internal/errors.js:609:14)
at TLSSocket.socketOnEnd (_http_client.js:458:23)
at TLSSocket.emit (events.js:326:22)

Solution:

I found out that the certificates I used were not valid. :-)

Upvotes: 0

Jeb50
Jeb50

Reputation: 7067

Got "[GET] localhost:4200, Socket hang up" during Azure Static Web App (SWA) Emulator for Angular app.

Solution is to remove this from angular.json:

"headers": {"cross-origin-opener-policy": "same-origin-allow-popups"}

Upvotes: 0

Mike Aski
Mike Aski

Reputation: 9236

Your problem might also come from an attempt to connect to an HTTP URL while your service is only published on HTTPS...

Definitely a time-consuming mistake!

Upvotes: 2

jarraga
jarraga

Reputation: 437

I had this error when running two applications on the same port by mistake. I had a next.js app and another one in nest.js, running both on port 8080, when I looked at the .env files I realized that they had the same port, so I changed the one from nest.js to 3000 and everything worked.

I'm not saying that this is the reason for the error but it's a possibility.

Upvotes: 0

Usama Majid
Usama Majid

Reputation: 1274

Might be your server or Socket connection crashes unexpectedly.

Upvotes: 0

esengineer
esengineer

Reputation: 9938

There are two cases when socket hang up gets thrown:

When you are a client

When you, as a client, send a request to a remote server, and receive no timely response. Your socket is ended which throws this error. You should catch this error and decide how to handle it: whether retry the request, queue it for later, etc.

When you are a server/proxy

When you, as a server, perhaps a proxy server, receive a request from a client, then start acting upon it (or relay the request to the upstream server), and before you have prepared the response, the client decides to cancel/abort the request.

This stack trace shows what happens when a client cancels the request.

Trace: { [Error: socket hang up] code: 'ECONNRESET' }
    at ClientRequest.proxyError (your_server_code_error_handler.js:137:15)
    at ClientRequest.emit (events.js:117:20)
    at Socket.socketCloseListener (http.js:1526:9)
    at Socket.emit (events.js:95:17)
    at TCP.close (net.js:465:12)

Line http.js:1526:9points to the same socketCloseListener mentioned by @Blender, particularly:

// This socket error fired before we started to
// receive a response. The error needs to
// fire on the request.
req.emit('error', createHangUpError());

...

function createHangUpError() {
  var error = new Error('socket hang up');
  error.code = 'ECONNRESET';
  return error;
}

This is a typical case if the client is a user in the browser. The request to load some resource/page takes long, and users simply refresh the page. Such action causes the previous request to get aborted which on your server side throws this error.

Since this error is caused by the wish of a client, they don't expect to receive any error message. So, no need to consider this error as critical. Just ignore it. This is encouraged by the fact that on such error the res socket that your client listened to is, though still writable, destroyed.

console.log(res.socket.destroyed); //true

So, no point to send anything, except explicitly closing the response object:

res.end();

However, what you should do for sure if you are a proxy server which has already relayed the request to the upstream, is to abort your internal request to the upstream, indicating your lack of interest in the response, which in turn will tell the upstream server to, perhaps, stop an expensive operation.

Upvotes: 324

Yehuda
Yehuda

Reputation: 1039

it's been a long time but another case is when performing requests which takes a long time on the server side (more then 2 minutes which is the default for express) and the timeout parameter was not configured in the server side. In my case I was doing client->server->server request (Node.js express) and I should set the timeout parameter on each request router on the server and on the client. So in both servers I needed to set the request timeout by using

req.setTimeout([your needed timeout])

on the router.

Upvotes: 3

live-love
live-love

Reputation: 52494

I was using nano, and it took me a long time to figure out this error. My problem was I was using the wrong port. I had port 5948 instead of 5984.

var nano = require('nano')('http://localhost:5984');
var db = nano.use('address');
var app = express();

Upvotes: 0

Eric McLachlan
Eric McLachlan

Reputation: 3530

I think "socket hang up" is a fairly general error indicating that the connection has been terminated from the server end. In other words, the sockets being used to maintain the connection between the client and the server have been disconnected. (While I'm sure many of the points mentioned above are helpful to various people, I think this is the more general answer.)

In my case, I was sending a request with a payload in excess of 20K. This was rejected by the server. I verified this by removing text and retrying until the request succeeded. After determining the maximum acceptable length, I verified that adding a single character caused the error to manifest. I also confirmed that the client wasn't the issue by sending the same request from a Python app and from Postman. So anyway, I'm confident that, in my case, the length of the payload was my specific problem.

Once again, the source of the problem is anecdotal. The general problem is "Server Says No".

Upvotes: 9

Predrag Davidovic
Predrag Davidovic

Reputation: 1566

This error also can happen when working with http.request, probably your request is not finished yet.

Example:

const req = https.request(options, res => {})

And you always need to add this line: req.end() With this function we will order to finish sending request.

As in documentation is said:

With http.request() one must always call req.end() to signify the end of the request - even if there is no data being written to the request body.

Upvotes: 4

Sunil Kumar
Sunil Kumar

Reputation: 1794

After a long debug into node js code, mongodb connection string, checking CORS etc, For me just switching to a different port number server.listen(port); made it work, into postman, try that too. No changes to proxy settings just the defaults.

Upvotes: 0

DianaDu
DianaDu

Reputation: 53

I got a similar error when using CouchDB on OCP cluster. 

const cloudantSessionStore = sessionStore.createSessionStore(
  {
    type: 'couchdb',
    host: 'https://' + credentials['host'],
    port: credentials['port'],
    dbName: 'sessions',
    options: {
      auth: {
        username: credentials['username'],
        password: credentials['password']
      },
      cache: false
    }
  }

Which should be "http", not "https", to connect with my CouchDB instance. Hope it could be helpful for anyone who is faced with similar issue.

Upvotes: 1

Aekkawit Chanpen
Aekkawit Chanpen

Reputation: 531

I used require('http') to consume https service and it showed "socket hang up".

Then I changed require('http') to require('https') instead, and it is working.

Upvotes: 44

Pawel Barcik
Pawel Barcik

Reputation: 529

There seems to be one additional case here, which is Electron not being a fan of the "localhost" domain name. In my case I needed to change this:

const backendApiHostUrl = "http://localhost:3000";

to this:

const backendApiHostUrl = "http://127.0.0.1:3000";

After that the problem just went away.

This means that DNS resolution (local or remote) might be causing some problems too.

Upvotes: 2

ZiiMakc
ZiiMakc

Reputation: 36986

I my case it's was not an error, but expected behavior for chrome browser. Chrome keeps tls connection alive (for speed i think), but node.js server stop it after 2 min and you get an error.

If you try GET request using edge browser, there will be no error at all. If you will close chrome window - you will get error right away.

So what to do? 1)You can filter this errors, because they are not really errors. 2)Maybe there is a better solution :)

Upvotes: 0

Shiyas Cholamukhath
Shiyas Cholamukhath

Reputation: 669

below is a simple example where I got the same error when I missed to add the commented code in below example. Uncommenting the code req.end() will resolve this issue.

var fs = require("fs");
var https = require("https");

var options = {
    host: "en.wikipedia.org",
    path: "/wiki/George_Washington",
    port: 443,
    method: "GET"
};

var req = https.request(options, function (res) {
    console.log(res.statusCode);
});


// req.end();

Upvotes: 49

Jeffrey Harmon
Jeffrey Harmon

Reputation: 2437

This caused me issues, as I was doing everything listed here, but was still getting errors thrown. It turns out that calling req.abort() actually throws an error, with a code of ECONNRESET, so you actually have to catch that in your error handler.

req.on('error', function(err) {
    if (err.code === "ECONNRESET") {
        console.log("Timeout occurs");
        return;
    }
    //handle normal errors
});

Upvotes: 7

Nikolay Podolnyy
Nikolay Podolnyy

Reputation: 1091

Also reason can be because of using app instance of express instead of server from const server = http.createServer(app) while creating server socket .

Wrong

const express = require('express');
const http = require('http');
const WebSocket = require('ws');


const app = express();

app.use(function (req, res) {
  res.send({ msg: "hello" });
});

const wss = new WebSocket.Server({ server: app }); // will throw error while connecting from client socket

app.listen(8080, function listening() {
  console.log('Listening on %d', server.address().port);
});

Correct

const express = require('express');
const http = require('http');
const WebSocket = require('ws');


const app = express();

app.use(function (req, res) {
  res.send({ msg: "hello" });
});

const server = http.createServer(app);
const wss = new WebSocket.Server({ server });

server.listen(8080, function listening() {
  console.log('Listening on %d', server.address().port);
});

Upvotes: 3

Константин Ван
Константин Ван

Reputation: 14819

For request module users

Timeouts

There are two main types of timeouts: connection timeouts and read timeouts. A connect timeout occurs if the timeout is hit while your client is attempting to establish a connection to a remote machine (corresponding to the connect() call on the socket). A read timeout occurs any time the server is too slow to send back a part of the response.

Note that connection timeouts emit an ETIMEDOUT error, and read timeouts emit an ECONNRESET error.

Upvotes: 10

Senica Gonzalez
Senica Gonzalez

Reputation: 8192

I think worth noting...

I was creating tests for Google APIs. I was intercepting the request with a makeshift server, then forwarding those to the real api. I was attempting to just pass along the headers in the request, but a few headers were causing a problem with express on the other end.

Namely, I had to delete connection, accept, and content-length headers before using the request module to forward along.

let headers = Object.assign({}, req.headers);
delete headers['connection']
delete headers['accept']
delete headers['content-length']
res.end() // We don't need the incoming connection anymore
request({
  method: 'post',
  body: req.body,
  headers: headers,
  json: true,
  url: `http://myapi/${req.url}`
}, (err, _res, body)=>{
  if(err) return done(err);
  // Test my api response here as if Google sent it.
})

Upvotes: 0

Yao Li
Yao Li

Reputation: 2286

I do both web (node) and Android development, and open Android Studio device simulator and docker together, both of them use port 8601, it complained socket hang up error, after close Android Studio device simulator and it works well in node side. Don’t use Android Studio device simulator and docker together.

Upvotes: 1

BrightEyed
BrightEyed

Reputation: 386

If you are experiencing this error over a https connection and it's happening instantly it could be a problem setting up the SSL connection.

For me it was this issue https://github.com/nodejs/node/issues/9845 but for you it could be something else. If it is a problem with the ssl then you should be able to reproduce it with the nodejs tls/ssl package just trying to connect to the domain

Upvotes: 0

AndreyU
AndreyU

Reputation: 51

I had the same problem during request to some server. In my case, setting any value to User-Agent in headers in request options helped me.

const httpRequestOptions = {
    hostname: 'site.address.com',
    headers: {
       'User-Agent': 'Chrome/59.0.3071.115'
    }
};

It's not a general case and depends on server settings.

Upvotes: 5

Jordan.J.D
Jordan.J.D

Reputation: 8113

Ran into this issue yesterday running my web application and node.js server through IntelliJ IDEA 2016.3.6. All I had to do was clear my cookies and cache in my Chrome browser.

Upvotes: 0

Thinhbk
Thinhbk

Reputation: 2214

In case you're using node-http-proxy, please be aware to this issue, which will result a socket hang-up error : https://github.com/nodejitsu/node-http-proxy/issues/180.

For resolution, also in this link, simply move declaring the API route (for proxying) within express routes before express.bodyParser().

Upvotes: 1

jmcollin92
jmcollin92

Reputation: 2996

In my case, it was because a application/json response was badly formatted (contains a stack trace). The response was never send to the server. That was very tricky to debug because, there were no log. This thread helps me a lot to understand what happens.

Upvotes: 0

Milkncookiez
Milkncookiez

Reputation: 7407

Another case worth mentioning (for Linux and OS X) is that if you use a library like https for performing the requests, or if you pass https://... as a URL of the locally served instance, you will be using port 443 which is a reserved private port and you might be ending up in Socket hang up or ECONNREFUSED errors.

Instead, use port 3000, f.e., and do an http request.

Upvotes: 9

Marcin T.P. Łuczyński
Marcin T.P. Łuczyński

Reputation: 3715

I had the same problem while using Nano library to connect to Couch DB. I tried to fine tune connection pooling with use of keepaliveagent library and it kept failing with socket hang up message.

var KeepAliveAgent = require('agentkeepalive');

var myagent = new KeepAliveAgent({
    maxSockets: 10,
    maxKeepAliveRequests: 0,
    maxKeepAliveTime: 240000
});

nano = new Nano({
    url : uri,
    requestDefaults : {
        agent : myagent
    }
});

After some struggling I was able to nail the problem - as it came out it was very, very simple mistake. I was connecting to the database via HTTPS protocol, but I kept passing to my nano object a keepalive agent created as the examples for use of this library show (they rely on some defaults that use http).

One simple change to use HttpsAgent did the trick:

var KeepAliveAgent = require('agentkeepalive').HttpsAgent;

Upvotes: 7

Related Questions