Reputation: 47
Can anyone help me on the below code, error is padding is invalid and cannot be removed. I am searching all over SO and applied all their suggestions, but still padding is invalid. I am using NET-2.0
Below is my code
static public String AES_encrypt(String Input)
{
string AES_Key = "PSVJQRk9QTEpNVU1DWUZCRVFGV1VVT0ZOV1RRU1NaWQ=";
string AES_IV = "YWlFLVEZZUFNaWlhPQ01ZT02qWU5HTFJQVFNCRUJZVA=";
var aes = new RijndaelManaged();
aes.KeySize = 256;
aes.BlockSize = 256;
aes.Padding = PaddingMode.PKCS7;
aes.Key = Convert.FromBase64String(AES_Key);
aes.IV = Convert.FromBase64String(AES_IV);
var encrypt = aes.CreateEncryptor(aes.Key, aes.IV);
byte[] xBuff = null;
using (var ms = new MemoryStream())
{
using (var cs = new CryptoStream(ms, encrypt, CryptoStreamMode.Write))
{
byte[] xXml = Encoding.UTF8.GetBytes(Input);
cs.Write(xXml, 0, xXml.Length);
}
xBuff = ms.ToArray();
}
String Output = Convert.ToBase64String(xBuff);
return Output;
}
static public String AES_decrypt(String Input)
{
string AES_Key = "PSVJQRk9QTEpNVU1DWUZCrOFGV1VVT0ZOV1RRU1NaWQ=";
string AES_IV = "YWlFLVEZZUFNaWlhPQ01ZT02qWU5HTFJQVFNCRUJZVA=";
RijndaelManaged aes = new RijndaelManaged();
aes.KeySize = 256;
aes.BlockSize = 256;
aes.Mode = CipherMode.CBC;
aes.Padding = PaddingMode.PKCS7;
aes.Key = Convert.FromBase64String(AES_Key);
aes.IV = Convert.FromBase64String(AES_IV);
var decrypt = aes.CreateDecryptor();
byte[] xBuff = null;
using (var ms = new MemoryStream())
{
using (var cs = new CryptoStream(ms, decrypt, CryptoStreamMode.Write))
{
byte[] xXml = Convert.FromBase64String(Input);
cs.Write(xXml, 0, xXml.Length);
}
xBuff = ms.ToArray();
}
String Output = Encoding.UTF8.GetString(xBuff);
return Output;
}
I am thinking the issues here is the AES_encrypt, because if I passed an encrypted string from PHP to my project, AES_decrypt will successfully decrypt it. However, whenever I use AES_encrypt, AES_decrypt is throwing error.
Any help would be greatly appreciated.
Upvotes: 2
Views: 3700
Reputation: 2146
Mahr - as Patrick has pointed out I should have taken the time to explain the changes I have made from your original..
Firstly your decryptor is created without any parameters & as such it doesn't understand the ciperkey to use Secondly the key & IV are in Bytes so you must divide by 8 before passing in the key sizes
I've also added a few extras to prevent further issues 1: You must clear the RijndaelManaged object when your're done with it 2: I've simplified the string conversion to make it a little clearer 3: And this is only because I like them I've created the methods as extension methods for easier use.
This should work..
private static byte[] _salt = Encoding.ASCII.GetBytes("o6806642kbM7c5");
/// <summary>
/// Encrypt the given string using AES. The string can be decrypted using
/// DecryptStringAES(). The sharedSecret parameters must match.
/// </summary>
/// <param name="plainText">The text to encrypt.</param>
/// <param name="sharedSecret">A password used to generate a key for encryption.</param>
public static string EncryptStringAES(this string plainText)
{
string sharedSecret = "abcd";
if (string.IsNullOrEmpty(plainText))
throw new ArgumentNullException("plainText");
if (string.IsNullOrEmpty(sharedSecret))
throw new ArgumentNullException("sharedSecret");
string outStr = null; // Encrypted string to return
RijndaelManaged aesAlg = null; // RijndaelManaged object used to encrypt the data.
try
{
// generate the key from the shared secret and the salt
Rfc2898DeriveBytes key = new Rfc2898DeriveBytes(sharedSecret, _salt);
// Create a RijndaelManaged object
// with the specified key and IV.
aesAlg = new RijndaelManaged();
aesAlg.Key = key.GetBytes(aesAlg.KeySize / 8);
aesAlg.IV = key.GetBytes(aesAlg.BlockSize / 8);
// Create a decrytor to perform the stream transform.
ICryptoTransform encryptor = aesAlg.CreateEncryptor(aesAlg.Key, aesAlg.IV);
// Create the streams used for encryption.
using (MemoryStream msEncrypt = new MemoryStream())
{
using (CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write))
{
using (StreamWriter swEncrypt = new StreamWriter(csEncrypt))
{
//Write all data to the stream.
swEncrypt.Write(plainText);
}
}
outStr = Convert.ToBase64String(msEncrypt.ToArray());
}
}
finally
{
// Clear the RijndaelManaged object.
if (aesAlg != null)
aesAlg.Clear();
}
// Return the encrypted bytes from the memory stream.
return outStr;
}
/// <summary>
/// Decrypt the given string. Assumes the string was encrypted using
/// EncryptStringAES(), using an identical sharedSecret.
/// </summary>
/// <param name="cipherText">The text to decrypt.</param>
/// <param name="sharedSecret">A password used to generate a key for decryption.</param>
public static string DecryptStringAES(this string cipherText)
{
string sharedSecret = "abcd";
if (string.IsNullOrEmpty(cipherText))
throw new ArgumentNullException("cipherText");
if (string.IsNullOrEmpty(sharedSecret))
throw new ArgumentNullException("sharedSecret");
// Declare the RijndaelManaged object
// used to decrypt the data.
RijndaelManaged aesAlg = null;
// Declare the string used to hold
// the decrypted text.
string plaintext = null;
try
{
// generate the key from the shared secret and the salt
Rfc2898DeriveBytes key = new Rfc2898DeriveBytes(sharedSecret, _salt);
// Create a RijndaelManaged object
// with the specified key and IV.
aesAlg = new RijndaelManaged();
aesAlg.Key = key.GetBytes(aesAlg.KeySize / 8);
aesAlg.IV = key.GetBytes(aesAlg.BlockSize / 8);
// Create a decrytor to perform the stream transform.
ICryptoTransform decryptor = aesAlg.CreateDecryptor(aesAlg.Key, aesAlg.IV);
// Create the streams used for decryption.
byte[] bytes = Convert.FromBase64String(cipherText);
using (MemoryStream msDecrypt = new MemoryStream(bytes))
{
using (CryptoStream csDecrypt = new CryptoStream(msDecrypt, decryptor, CryptoStreamMode.Read))
{
using (StreamReader srDecrypt = new StreamReader(csDecrypt))
// Read the decrypted bytes from the decrypting stream
// and place them in a string.
plaintext = srDecrypt.ReadToEnd();
}
}
}
finally
{
// Clear the RijndaelManaged object.
if (aesAlg != null)
aesAlg.Clear();
}
return plaintext;
}
Upvotes: 1