CODEWITHSUNDEEP
linuxiokernel
svp
svp

Reputation: 81

Read a single sector from a disk

I am trying to read a single specific sector from the disk directly. I've currently run out of ideas and any suggestions how to go about it would be great!

Upvotes: 8

Views: 26021

Answers (5)

craymichael
craymichael

Reputation: 4821

Another alternative is to use hdparm

For instance-

hdparm --read-sector 16782858 /dev/sda

Upvotes: 1

trg
trg

Reputation: 79

In C it is something like the following... It would require root permissions. I think you need to open the file with O_DIRECT if you want to read single sectors. Otherwise you'll get a page. I'm not sure if the aligned buffer is required for a read, but it is for a write.

#include <stdio.h>
#include <errno.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

#define SECTOR_SIZE 512

int main(int argc, char *argv[]) {
        int offset = 0;
    int length = 5;
    int rc = -1;

    char *sector = aligned_alloc(SECTOR_SIZE, SECTOR_SIZE);
    memset(sector, 0, SECTOR_SIZE);
    /* replace XXX with the source block device */
    int fd=open("/dev/XXX", O_RDWR | O_DIRECT);

    lseek(fd, offset, SEEK_SET);
    for (int i = 0; i < length; i++) {
        rc = read(fd, sector, SECTOR_SIZE);
        if (rc < 0)
            printf("sector read error at offset = %d + %d\n %s", offset, i, strerror(errno));
        printf("Sector: %d\n", i);
        for (int j = 0; j < SECTOR_SIZE; j++) {
            printf("%x", sector[i]);
            if ((j + 1) % 16 == 0)
                printf("\n");
        }
    }
    free(sector);
    close(fd);
}

Upvotes: 2

Carl Smotricz
Carl Smotricz

Reputation: 67760

The other folks have pretty much covered it. You need to

  • access to the disk's device file (either be root or, better, change the permissions on it)

  • use the file IO functions to read sectors = chunks of (usually) 512 bytes from said disk.

Upvotes: 0

Gene Goykhman
Gene Goykhman

Reputation: 2001

I'm not sure what the best programmatic approach is, but from the Linux command-line you could use the dd command in combination with the raw device for your disk to directly read from the disk.

You need to sudo this command to get access to the raw disk device (e.g. /dev/rdisk0).

For example, the following will read a single 512-byte block from an offset of 900 blocks from the top of disk0 and output it to stdout.

sudo dd if=/dev/rdisk0 bs=512 skip=900 count=1

See the dd man page to get additional information on the parameters to dd.

Upvotes: 4

DigitalRoss
DigitalRoss

Reputation: 146063

Try something like this to do it from the CLI:

# df -h .
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda2              27G   24G  1.6G  94% /
# dd bs=512 if=/dev/sda2 of=/tmp/sector200 skip=200 count=1
1+0 records in
1+0 records out

From man 4 sd:

FILES
   /dev/sd[a-h]: the whole device
   /dev/sd[a-h][0-8]: individual block partitions

And if you want to do this from within a program, just use a combination of system calls from man 2 ... like open, lseek,, and read, with the parameters from the dd example.

Upvotes: 10

Related Questions