CODEWITHSUNDEEP
androidproxyvirtualboxcharles-proxygenymotion
CtrlF
CtrlF

Reputation: 674

SSL Proxy with Genymotion and Charles?

I'm trying to get Genymotion (an x86 Android emulator hosted in Virtualbox) working with Charles proxy. I've managed to connect the device to the proxy in the device's wifi proxy settings, using the gateway ip (the vm is configured to use a host-only adapter fwiw) and http traffic is proxied just fine. I've got the charles cert installed on the vm, but all ssl connections still fail with "SSL: Unrecognized SSL message, plaintext connection?" errors. Has anyone been able to configure genymotion to work with Charles as an ssl proxy? Is there a more generic solution I can implement through the virtualbox settings?

Thanks in advance.

Upvotes: 25

Views: 19802

Answers (4)

Noah Tran
Noah Tran

Reputation: 3594

It's tricky to setup properly on genymotion device, but here is the steps: 1. Start Genymotion device 2. Go to Setting -> Wifi -> Hold or open Advance Tab 3. Proxy Setting and select Manual 4. Config to the port of Mitm app. Charles is 8888, Proxyman is 9090 5. Install the certificate at: - http://charlesproxy.com/getssl for Charles - http://proxy.man/ssl for Proxyman 6. Accept the Certificate 7. Test again.

Basically, those steps are consistent from Charles Proxy and Proxyman. Hopefully it could help you.

Upvotes: 0

Salil Kaul
Salil Kaul

Reputation: 261

Go to your genymotion emulator

Settings -> Wifi -> Press and hold your active network

Select “Modify Network”

Select “Show Advanced Options”

Select “Proxy Settings -> Manual”

Set your Proxy to: 10.0.3.2 (Genymotion’s special code for the local workstation. the Network mode must be NAT on virtual device configuration)

Set your Port to: 8888

Press Save.

Although after this you will see the network requests logged in charlesproxy . Open the genymotion browser and go the following URL http://charlesproxy.com/getssl to download and install the certificate . you should be good to go . Copied from :http://rexstjohn.com/using-genymotion-charles-proxy/

Upvotes: 21

Michal Harakal
Michal Harakal

Reputation: 1035

Updated 21.07.2016 reflecting changes since Charles 3.10

For enabling plain text communication on SSL connections Charles act as a Man in the Middle. After you have managed your device to communicate via Charles http proxy, you need to download and install certificate from your running instance of Charles, its generated and signed by a Charles Root Certificate.

Basically there are two ways possible (I prefer the first one):

Download and install directly on device

Device has to be configured to communicate via Charles!

  1. start browser
  2. open http://charlesproxy.com/getssl
  3. certificate download will be started
  4. confirm insertion dialog

Save the certificate from Charles UI

  1. save the certificate via "Help -> SSL Proxying -> Save Charles Root Certificate.."
  2. put it on a device (via adb push, email ....) and click on the file in order to install it.

Note 1: After install the certificate you will be forced to create a security Pin/Pattern/Password for the device.

Note 2: Since Charles v3.10 single SSL Root Certificates aren't supported anymore.

Upvotes: 14

JamesDeHart
JamesDeHart

Reputation: 245

After install the cert you will be forced to create a security Pin/Pattern/Password for the device. :)

Upvotes: 0

Related Questions