CODEWITHSUNDEEP
c++visual-studio-2010opencv
Usama
Usama

Reputation: 1965

openCV imshow not rendering image on screen

I am new to openCV, have recently obtained a pre-compiled version of openCV 2.4.7 and was successfully able to integrate it with visual studio 2010.

Apparently library seems to work fine, but when I'm trying to display image using imshow it displays the window but doesn't display image in it.

{
    cv::Mat image = cv::imread("F:/office_Renzym/test3.jpg",CV_LOAD_IMAGE_UNCHANGED);

    if(image.empty())
    {
        cout<<"image not loaded";
    }
    else
    {
        cv::namedWindow( "test", CV_WINDOW_AUTOSIZE );
        cv::imshow("test",image);
    }   
}

Any help would be highly appreciated.

Upvotes: 21

Views: 33435

Answers (4)

teaholic
teaholic

Reputation: 61

The cv2.waitKey(0) waits for key-press indefinitely. In case of streamed data where update is required, better use cv2.pollKey() instead of (often suggested) cv2.waitKey(1), which actually introduces at least 1 ms delay.

Upvotes: 0

Pe Dro
Pe Dro

Reputation: 3023

For Python users, using cv2.wait(0) is the solution. So, the overall format goes like this

    cv2.imwrite("DetectionResults.jpg", frame)
    cv2.imshow("DetectionResults", frame)
    cv2.waitKey(0)

Upvotes: 2

Totoro doesn&#39;t feed AI anymore
Totoro doesn&#39;t feed AI anymore

Reputation: 3408

I suggest removing the cv::namedWindow statement, and adding

cv::waitKey();

after the cv:imshow statement. You can also check whether the dimensions of the window are correct.

Upvotes: 2

Roger Rowland
Roger Rowland

Reputation: 26259

You must have:

cv::waitKey(0);

instead of:

system("pause");

The latter just doesn't work. OpenCV needs to pump messages to get the window displayed and updated, and inside that waitKey function is all of the mechanism to do so.

As the documentation says, waitKey only works if you have a HighGUI window open, so in your code, you probably need to do this:

cv::Mat image = cv::imread("F:/office_Renzym/test3.jpg",CV_LOAD_IMAGE_UNCHANGED);

if(image.empty())
{
    cout<<"image not loaded";
}
else
{
    cv::namedWindow( "test", CV_WINDOW_AUTOSIZE );
    cv::imshow("test",image);
    cv::waitKey(0);
}

In case there's a problem with the image format, you might try loading like this:

cv::Mat image = cv::imread("F:/office_Renzym/test3.jpg",CV_LOAD_IMAGE_COLOR);

Upvotes: 32

Related Questions