CODEWITHSUNDEEP
cassandra
Satya
Satya

Reputation: 312

How to create a Cassandra node Cluster in Windows7 pcs?

Problem while Creating cluster using cassandra:-

I follow the below steps for creating a Cassandra cluster:- 1.Installed cassandra in 3 Windows-7 PCs. PC IPAddress-127.0.0.1,127.0.0.2,127.0.0.3

2.Modified the cassandra.yaml file as below.
  cluster_name: 'MyCluster'
  num_tokens: 256
  seed_provider:  - seeds: "127.0.0.1"
  listen_address: 127.0.0.1,127.0.0.2,127.0.0.3
  rpc_address: 0.0.0.0

3.start the Cassandra in all the above 3 PCs.

but I am not getting more than 1 Node in Node tool. I can see only one node.  

I have installed  datastax-community-64bit_2.0.3

So, Please help me to solve this problem. I need to create Cassandra cluster.
Thanks in Adavance,
Satya

Upvotes: 3

Views: 753

Answers (2)

Subhra Ranjan
Subhra Ranjan

Reputation: 113

You have follow all the steps for creating cluster,but you have to define firewall inbound rule for allowing the port.(by default these ports are not allowed by firewall).So after modifying the "cassandra.yaml" file,you have to set the port used in cassandra and datastax in your firewall,then start the cassandra service. For adding port in firewall: go to control panel->windows firewall->advanced setting->Inbound Rules->new Rule->select port and add all the ports require for the cassandra/datastax. google the require ports for cassandra/datastax.

Upvotes: 1

Ralf
Ralf

Reputation: 6853

The 127.x.x.x IP addresses you are using are all loopback device addresses. Traffic sent to those addresses never leaves your localhost. If you want the three hosts to discover each other you need to use IPs from some private IP address range. See this Wikipedia article for an overview. As your Windows workstations are networked, the IP number to use should be obvious from running ipconfig on the command line on each of the three workstations. Look for the output entry IPv4-Adress.

Upvotes: 1

Related Questions