performancereporting-servicesreportreportingservices-2005

Reputation: 2271

Fast query runs slow in SSRS

I have an SSRS report that calls out to a stored procedure. If I run the stored procedure directly from a query window, it will return in under 2 seconds. However, the same query run from an 2005 SSRS report takes up to 5 minutes to complete. This is not just happening on the first run, it happens every time. Additionally, I don't see this same problem in other environments.

Any ideas on why the SSRS report would run so slow in this particular environment?

Upvotes: 87

Answers (18)

James

Reputation: 33

I had the same issue. It turned out that the execution plan being created was enormous and convoluted.

I tried avoiding parameter sniffing, clearing the plan cache, using OPTION(RECOMPILE) and nothing worked.

Finally - which I probably should have started with - I updated the table statistics. Problem solved!

Upvotes: 0

MiguelSlv

Reputation: 15113

I was able to solve this by removing the [&TotalPages] builtin field from the bottom. The time when down from minutes to less than a second.

Something odd that I could not determined was having impact on the calculation of total pages.

I was using SSRS 2012.

Upvotes: 3

Ranjan

Reputation: 31

In my case, I just had to disconnect and connect the SSMS. I profiled the query and the duration of execution was showing 1 minute even though the query itself runs under 2 seconds. Restarted the connection and ran again, this time the duration showed the correct execution time.

Upvotes: 3

user7788038

Reputation: 7

In our case, no code was required.

Note from our Help Desk: "Clearing out your Internet Setting will fix this problem."

Maybe that means "clear cache."

Upvotes: -1

jay

Reputation: 41

I came across a similar issue of my stored procedure executing quickly from Management Studio but executing very slow from SSRS. After a long struggle I solved this issue by deleting the stored procedure physically and recreating it. I am not sure of the logic behind it, but I assume it is because of the change in table structure used in the stored procedure.

Upvotes: 4

mRiddle

Reputation: 214

DO you use "group by" in the SSRS table?

I had a report with 3 grouped by fields and I noticed that the report runed very slowly despite having a light query, to the point where I can't even dial values in the search field.

Than I removed the groupings and now the report goes up in seconds and everything works in an instant.

Upvotes: 1

Alexey Sukhanov

Reputation: 399

I had the report html output trouble on report retrieving 32000 lines. The query ran fast but the output into web browser was very slow. In my case I had to activate “Interactive Paging” to allow user to see first page and be able to generate Excel file. The pros of this solution is that first page appears fast and user can generate export to Excel or PDF, the cons is that user can scroll only current page. If user wants to see more content he\she must use navigation buttons above the grid. In my case user accepted this behavior because the export to Excel was more important.

To activate “Interactive Paging” you must click on the free area in the report pane and change property “InteractiveSize”\ “Height” on the report level in Properties pane. Set this property to different from 0. I set to 8.5 inches in my case. Also ensure that you unchecked “Keep together on one page if possible” property on the Tablix level (right click on the Tablix, then “Tablix Properties”, then “General”\ “Page Break Options”).

Upvotes: 5

Solomon

Reputation: 26

Had the same problem, and fixed it by giving the shared dataset a default parameter and updating that dataset in the reporting server.

Upvotes: 1

bubbassauro

Reputation: 4279

If your stored procedure uses linked servers or openquery, they may run quickly by themselves but take a long time to render in SSRS. Some general suggestions:

Retrieve the data directly from the server where the data is stored by using a different data source instead of using the linked server to retrieve the data.
Load the data from the remote server to a local table prior to executing the report, keeping the report query simple.
Use a table variable to first retrieve the data from the remote server and then join with your local tables instead of directly returning a join with a linked server.

I see that the question has been answered, I'm just adding this in case someone has this same issue.

Upvotes: 5

Steve

Reputation: 31

Aside from the parameter-sniffing issue, I've found that SSRS is generally slower at client side processing than (in my case) Crystal reports. The SSRS engine just doesn't seem as capable when it has a lot of rows to locally filter or aggregate. Granted, these are result set design problems which can frequently be addressed (though not always if the details are required for drilldown) but the more um...mature...reporting engine is more forgiving.

Upvotes: 3

Redroidmator

Reputation: 121

I had the same problem, here is my description of the problem

"I created a store procedure which would generate 2200 Rows and would get executed in almost 2 seconds however after calling the store procedure from SSRS 2008 and run the report it actually never ran and ultimately I have to kill the BIDS (Business Intelligence development Studio) from task manager".

What I Tried: I tried running the SP from reportuser Login but SP was running normal for that user as well, I checked Profiler but nothing worked out.

Solution:

Actually the problem is that even though SP is generating the result but SSRS engine is taking time to read these many rows and render it back. So I added WITH RECOMPILE option in SP and ran the report .. this is when miracle happened and my problem got resolve.

Upvotes: 12

Joanne

Reputation: 31

I Faced the same issue. For me it was just to unckeck the option :

Tablix Properties=> Page Break Option => Keep together on one page if possible

Of SSRS Report. It was trying to put all records on the same page instead of creating many pages.

Upvotes: 3

Antony

Reputation: 51

I simply deselected 'Repeat header columns on each page' within the Tablix Properties.

Upvotes: 5

Brian Smedley

Reputation: 161

Add this to the end of your proc: option(recompile)

This will make the report run almost as fast as the stored procedure

Upvotes: 16

JHFB

Reputation: 451

I will add that I had the same problem with a non-stored procedure query - just a plain select statement. To fix it, I declared a variable within the dataset SQL statement and set it equal to the SSRS parameter.

What an annoying workaround! Still, thank you all for getting me close to the answer!

Upvotes: 17

Rod C

Reputation: 61

I had the same scenario occuring..Very basic report, the SP (which only takes in 1 param) was taking 5 seconds to bring back 10K records, yet the report would take 6 minutes to run. According to profiler and the RS ExecutionLogStorage table, the report was spending all it's time on the query. Brian S.'s comment led me to the solution..I simply added WITH RECOMPILE before the AS statement in the SP, and now the report time pretty much matches the SP execution time.

Upvotes: 6

user275554

Reputation: 2271

Thanks for the suggestions provided here. We have found a solution and it did turn out to be related to the parameters. SQL Server was producing a convoluted execution plan when executed from the SSRS report due to 'parameter sniffing'. The workaround was to declare variables inside of the stored procedure and assign the incoming parameters to the variables. Then the query used the variables rather than the parameters. This caused the query to perform consistently whether called from SQL Server Manager or through the SSRS report.

Upvotes: 125

JonH

Reputation: 33143

Couple of things you can do, without executing the actual report just run the sproc from within the data tab of reporting services. Does it still take time? Another option is to use SQL Profiler and determine what is coming in and out of the database system.

Another thing you can do to test it, so to recreate a simple report without any parameters. Run the report and see if it makes a difference. It could be that your RS report is corrupted or badly formed that may cause the rendering to be really slow.

Upvotes: 1

Fast query runs slow in SSRS

Answers (18)

Related Questions