Olivia Stork
Reputation: 4809
How to use VideoToolbox to decompress H.264 video stream
I had a lot of trouble figuring out how to use Apple's Hardware accelerated video framework to decompress an H.264 video stream. After a few weeks I figured it out and wanted to share an extensive example since I couldn't find one.
My goal is to give a thorough, instructive example of Video Toolbox introduced in WWDC '14 session 513. My code will not compile or run since it needs to be integrated with an elementary H.264 stream (like a video read from a file or streamed from online etc) and needs to be tweaked depending on the specific case.
I should mention that I have very little experience with video en/decoding except what I learned while googling the subject. I don't know all the details about video formats, parameter structure etc. so I've only included what I think you need to know.
I am using XCode 6.2 and have deployed to iOS devices that are running iOS 8.1 and 8.2.
Upvotes: 81
Views: 60915
Answers (7)
Olivia Stork
Reputation: 4809
Concepts:
NALUs:
- NALUs are simply a chunk of data of varying length that has a NALU start code header
0x00 00 00 01 YYwhere the first 5 bits ofYYtells you what type of NALU this is and therefore what type of data follows the header. - Since you only need the first 5 bits, I use
YY & 0x1Fto just get the relevant bits. - I list what all these types are in the method
NSString * const naluTypesStrings[], but you don't need to know what they all are.
- NALUs are simply a chunk of data of varying length that has a NALU start code header
Parameters:
- Your decoder needs parameters so it knows how the H.264 video data is stored.
- The 2 you need to set are Sequence Parameter Set (SPS) and Picture Parameter Set (PPS) and they each have their own NALU type number. (You don't need to know what the parameters mean, the decoder knows what to do with them.)
H.264 Stream Format:
- In most H.264 streams, you will receive with an initial set of PPS and SPS parameters followed by an i frame (aka IDR frame or flush frame) NALU. Then you will receive several P frame NALUs (maybe a few dozen or so), then another set of parameters (which may be the same as the initial parameters) then an i frame, more P frames, etc...
- Note that i frames are much bigger than P frames.
- Conceptually you can think of the i frame as an entire image of the video, and the P frames are just the changes that have been made to that i frame (until you receive the next i frame.)
Procedure:
Generate individual NALUs from your H.264 stream. I cannot show code for this step since it depends a lot on what video source you're using. I made this graphic to show what I was working with (
datain the graphic isframein my following code), but your case may and probably will differ.
My method receivedRawVideoFrame:is called every time I receive a frame (uint8_t *frame) which was one of 2 types. In the diagram, those 2 frame types are the 2 big purple boxes.Create a
CMVideoFormatDescriptionReffrom your SPS and PPS NALUs withCMVideoFormatDescriptionCreateFromH264ParameterSets( ). You cannot display any frames without doing this first. The SPS and PPS may look like a jumble of numbers, but VTD knows what to do with them. All you need to know is thatCMVideoFormatDescriptionRefis a description of video data., like width/height, format type (kCMPixelFormat_32BGRA,kCMVideoCodecType_H264etc.), aspect ratio, color space etc. Your decoder will hold onto the parameters until a new set arrives (sometimes parameters are resent regularly even when they haven't changed).Re-package your IDR and non-IDR frame NALUs according to the
AVCCformat. This means removing the NALU start codes and replacing them with a 4-byte header that states the length of the NALU. You don't need to do this for the SPS and PPS NALUs. (Note that the 4-byte NALU length header is in big-endian, so if you have aUInt32value it must be byte-swapped before copying to theCMBlockBufferusingCFSwapInt32. I do this in my code with thehtonlfunction call.)Package the IDR and non-IDR NALU frames into
CMBlockBuffer. Do not do this with the SPS PPS parameter NALUs. All you need to know aboutCMBlockBuffersis that they are a method to wrap arbitrary blocks of data in core media. (Any compressed video data in a video pipeline is wrapped in this.)Package the
CMBlockBufferintoCMSampleBuffer. All you need to know aboutCMSampleBuffersis that they wrap up ourCMBlockBufferswith other information (here it would be theCMVideoFormatDescriptionandCMTime, ifCMTimeis used).Create a
VTDecompressionSessionRefand feed the sample buffers intoVTDecompressionSessionDecodeFrame( ). Alternatively, you can useAVSampleBufferDisplayLayerand itsenqueueSampleBuffer:method and you won't need to use VTDecompSession. It's simpler to set up, but will not throw errors if something goes wrong like VTD will.In the
VTDecompSessioncallback, use the resultantCVImageBufferRefto display the video frame. If you need to convert yourCVImageBufferto aUIImage, see my StackOverflow answer here.
Other notes:
H.264 streams can vary a lot. From what I learned, NALU start code headers are sometimes 3 bytes (
0x00 00 01) and sometimes 4 (0x00 00 00 01). My code works for 4 bytes; you will need to change a few things around if you're working with 3.If you want to know more about NALUs, I found this answer to be very helpful. In my case, I found that I didn't need to ignore the "emulation prevention" bytes as described, so I personally skipped that step but you may need to know about that.
If your
VTDecompressionSessionoutputs an error number (like-12909) look up the error code in your XCode project. Find the VideoToolbox framework in your project navigator, open it and find the headerVTErrors.h. If you can't find it, I've also included all the error codes below in another answer.
Code Example:
So let's start by declaring some global variables and including the VT framework (VT = Video Toolbox).
#import <VideoToolbox/VideoToolbox.h>
@property (nonatomic, assign) CMVideoFormatDescriptionRef formatDesc;
@property (nonatomic, assign) VTDecompressionSessionRef decompressionSession;
@property (nonatomic, retain) AVSampleBufferDisplayLayer *videoLayer;
@property (nonatomic, assign) int spsSize;
@property (nonatomic, assign) int ppsSize;
The following array is only used so that you can print out what type of NALU frame you are receiving. If you know what all these types mean, congrats! You know more about H.264 than me! :) My code only handles types 1, 5, 7 and 8.
NSString * const naluTypesStrings[] =
{
@"0: Unspecified (non-VCL)",
@"1: Coded slice of a non-IDR picture (VCL)", // P frame
@"2: Coded slice data partition A (VCL)",
@"3: Coded slice data partition B (VCL)",
@"4: Coded slice data partition C (VCL)",
@"5: Coded slice of an IDR picture (VCL)", // I frame
@"6: Supplemental enhancement information (SEI) (non-VCL)",
@"7: Sequence parameter set (non-VCL)", // SPS parameter
@"8: Picture parameter set (non-VCL)", // PPS parameter
@"9: Access unit delimiter (non-VCL)",
@"10: End of sequence (non-VCL)",
@"11: End of stream (non-VCL)",
@"12: Filler data (non-VCL)",
@"13: Sequence parameter set extension (non-VCL)",
@"14: Prefix NAL unit (non-VCL)",
@"15: Subset sequence parameter set (non-VCL)",
@"16: Reserved (non-VCL)",
@"17: Reserved (non-VCL)",
@"18: Reserved (non-VCL)",
@"19: Coded slice of an auxiliary coded picture without partitioning (non-VCL)",
@"20: Coded slice extension (non-VCL)",
@"21: Coded slice extension for depth view components (non-VCL)",
@"22: Reserved (non-VCL)",
@"23: Reserved (non-VCL)",
@"24: STAP-A Single-time aggregation packet (non-VCL)",
@"25: STAP-B Single-time aggregation packet (non-VCL)",
@"26: MTAP16 Multi-time aggregation packet (non-VCL)",
@"27: MTAP24 Multi-time aggregation packet (non-VCL)",
@"28: FU-A Fragmentation unit (non-VCL)",
@"29: FU-B Fragmentation unit (non-VCL)",
@"30: Unspecified (non-VCL)",
@"31: Unspecified (non-VCL)",
};
Now this is where all the magic happens.
-(void) receivedRawVideoFrame:(uint8_t *)frame withSize:(uint32_t)frameSize isIFrame:(int)isIFrame
{
OSStatus status;
uint8_t *data = NULL;
uint8_t *pps = NULL;
uint8_t *sps = NULL;
// I know what my H.264 data source's NALUs look like so I know start code index is always 0.
// if you don't know where it starts, you can use a for loop similar to how i find the 2nd and 3rd start codes
int startCodeIndex = 0;
int secondStartCodeIndex = 0;
int thirdStartCodeIndex = 0;
long blockLength = 0;
CMSampleBufferRef sampleBuffer = NULL;
CMBlockBufferRef blockBuffer = NULL;
int nalu_type = (frame[startCodeIndex + 4] & 0x1F);
NSLog(@"~~~~~~~ Received NALU Type \"%@\" ~~~~~~~~", naluTypesStrings[nalu_type]);
// if we havent already set up our format description with our SPS PPS parameters, we
// can't process any frames except type 7 that has our parameters
if (nalu_type != 7 && _formatDesc == NULL)
{
NSLog(@"Video error: Frame is not an I Frame and format description is null");
return;
}
// NALU type 7 is the SPS parameter NALU
if (nalu_type == 7)
{
// find where the second PPS start code begins, (the 0x00 00 00 01 code)
// from which we also get the length of the first SPS code
for (int i = startCodeIndex + 4; i < startCodeIndex + 40; i++)
{
if (frame[i] == 0x00 && frame[i+1] == 0x00 && frame[i+2] == 0x00 && frame[i+3] == 0x01)
{
secondStartCodeIndex = i;
_spsSize = secondStartCodeIndex; // includes the header in the size
break;
}
}
// find what the second NALU type is
nalu_type = (frame[secondStartCodeIndex + 4] & 0x1F);
NSLog(@"~~~~~~~ Received NALU Type \"%@\" ~~~~~~~~", naluTypesStrings[nalu_type]);
}
// type 8 is the PPS parameter NALU
if(nalu_type == 8)
{
// find where the NALU after this one starts so we know how long the PPS parameter is
for (int i = _spsSize + 4; i < _spsSize + 30; i++)
{
if (frame[i] == 0x00 && frame[i+1] == 0x00 && frame[i+2] == 0x00 && frame[i+3] == 0x01)
{
thirdStartCodeIndex = i;
_ppsSize = thirdStartCodeIndex - _spsSize;
break;
}
}
// allocate enough data to fit the SPS and PPS parameters into our data objects.
// VTD doesn't want you to include the start code header (4 bytes long) so we add the - 4 here
sps = malloc(_spsSize - 4);
pps = malloc(_ppsSize - 4);
// copy in the actual sps and pps values, again ignoring the 4 byte header
memcpy (sps, &frame[4], _spsSize-4);
memcpy (pps, &frame[_spsSize+4], _ppsSize-4);
// now we set our H264 parameters
uint8_t* parameterSetPointers[2] = {sps, pps};
size_t parameterSetSizes[2] = {_spsSize-4, _ppsSize-4};
// suggestion from @Kris Dude's answer below
if (_formatDesc)
{
CFRelease(_formatDesc);
_formatDesc = NULL;
}
status = CMVideoFormatDescriptionCreateFromH264ParameterSets(kCFAllocatorDefault, 2,
(const uint8_t *const*)parameterSetPointers,
parameterSetSizes, 4,
&_formatDesc);
NSLog(@"\t\t Creation of CMVideoFormatDescription: %@", (status == noErr) ? @"successful!" : @"failed...");
if(status != noErr) NSLog(@"\t\t Format Description ERROR type: %d", (int)status);
// See if decomp session can convert from previous format description
// to the new one, if not we need to remake the decomp session.
// This snippet was not necessary for my applications but it could be for yours
/*BOOL needNewDecompSession = (VTDecompressionSessionCanAcceptFormatDescription(_decompressionSession, _formatDesc) == NO);
if(needNewDecompSession)
{
[self createDecompSession];
}*/
// now lets handle the IDR frame that (should) come after the parameter sets
// I say "should" because that's how I expect my H264 stream to work, YMMV
nalu_type = (frame[thirdStartCodeIndex + 4] & 0x1F);
NSLog(@"~~~~~~~ Received NALU Type \"%@\" ~~~~~~~~", naluTypesStrings[nalu_type]);
}
// create our VTDecompressionSession. This isnt neccessary if you choose to use AVSampleBufferDisplayLayer
if((status == noErr) && (_decompressionSession == NULL))
{
[self createDecompSession];
}
// type 5 is an IDR frame NALU. The SPS and PPS NALUs should always be followed by an IDR (or IFrame) NALU, as far as I know
if(nalu_type == 5)
{
// find the offset, or where the SPS and PPS NALUs end and the IDR frame NALU begins
int offset = _spsSize + _ppsSize;
blockLength = frameSize - offset;
data = malloc(blockLength);
data = memcpy(data, &frame[offset], blockLength);
// replace the start code header on this NALU with its size.
// AVCC format requires that you do this.
// htonl converts the unsigned int from host to network byte order
uint32_t dataLength32 = htonl (blockLength - 4);
memcpy (data, &dataLength32, sizeof (uint32_t));
// create a block buffer from the IDR NALU
status = CMBlockBufferCreateWithMemoryBlock(NULL, data, // memoryBlock to hold buffered data
blockLength, // block length of the mem block in bytes.
kCFAllocatorNull, NULL,
0, // offsetToData
blockLength, // dataLength of relevant bytes, starting at offsetToData
0, &blockBuffer);
NSLog(@"\t\t BlockBufferCreation: \t %@", (status == kCMBlockBufferNoErr) ? @"successful!" : @"failed...");
}
// NALU type 1 is non-IDR (or PFrame) picture
if (nalu_type == 1)
{
// non-IDR frames do not have an offset due to SPS and PSS, so the approach
// is similar to the IDR frames just without the offset
blockLength = frameSize;
data = malloc(blockLength);
data = memcpy(data, &frame[0], blockLength);
// again, replace the start header with the size of the NALU
uint32_t dataLength32 = htonl (blockLength - 4);
memcpy (data, &dataLength32, sizeof (uint32_t));
status = CMBlockBufferCreateWithMemoryBlock(NULL, data, // memoryBlock to hold data. If NULL, block will be alloc when needed
blockLength, // overall length of the mem block in bytes
kCFAllocatorNull, NULL,
0, // offsetToData
blockLength, // dataLength of relevant data bytes, starting at offsetToData
0, &blockBuffer);
NSLog(@"\t\t BlockBufferCreation: \t %@", (status == kCMBlockBufferNoErr) ? @"successful!" : @"failed...");
}
// now create our sample buffer from the block buffer,
if(status == noErr)
{
// here I'm not bothering with any timing specifics since in my case we displayed all frames immediately
const size_t sampleSize = blockLength;
status = CMSampleBufferCreate(kCFAllocatorDefault,
blockBuffer, true, NULL, NULL,
_formatDesc, 1, 0, NULL, 1,
&sampleSize, &sampleBuffer);
NSLog(@"\t\t SampleBufferCreate: \t %@", (status == noErr) ? @"successful!" : @"failed...");
}
if(status == noErr)
{
// set some values of the sample buffer's attachments
CFArrayRef attachments = CMSampleBufferGetSampleAttachmentsArray(sampleBuffer, YES);
CFMutableDictionaryRef dict = (CFMutableDictionaryRef)CFArrayGetValueAtIndex(attachments, 0);
CFDictionarySetValue(dict, kCMSampleAttachmentKey_DisplayImmediately, kCFBooleanTrue);
// either send the samplebuffer to a VTDecompressionSession or to an AVSampleBufferDisplayLayer
[self render:sampleBuffer];
}
// free memory to avoid a memory leak, do the same for sps, pps and blockbuffer
if (NULL != data)
{
free (data);
data = NULL;
}
}
The following method creates your VTD session. Recreate it whenever you receive new parameters. (You don't have to recreate it every time you receive parameters, pretty sure.)
If you want to set attributes for the destination CVPixelBuffer, read up on CoreVideo PixelBufferAttributes values and put them in NSDictionary *destinationImageBufferAttributes.
-(void) createDecompSession
{
// make sure to destroy the old VTD session
_decompressionSession = NULL;
VTDecompressionOutputCallbackRecord callBackRecord;
callBackRecord.decompressionOutputCallback = decompressionSessionDecodeFrameCallback;
// this is necessary if you need to make calls to Objective C "self" from within in the callback method.
callBackRecord.decompressionOutputRefCon = (__bridge void *)self;
// you can set some desired attributes for the destination pixel buffer. I didn't use this but you may
// if you need to set some attributes, be sure to uncomment the dictionary in VTDecompressionSessionCreate
NSDictionary *destinationImageBufferAttributes = [NSDictionary dictionaryWithObjectsAndKeys:
[NSNumber numberWithBool:YES],
(id)kCVPixelBufferOpenGLESCompatibilityKey,
nil];
OSStatus status = VTDecompressionSessionCreate(NULL, _formatDesc, NULL,
NULL, // (__bridge CFDictionaryRef)(destinationImageBufferAttributes)
&callBackRecord, &_decompressionSession);
NSLog(@"Video Decompression Session Create: \t %@", (status == noErr) ? @"successful!" : @"failed...");
if(status != noErr) NSLog(@"\t\t VTD ERROR type: %d", (int)status);
}
Now this method gets called every time VTD is done decompressing any frame you sent to it. This method gets called even if there's an error or if the frame is dropped.
void decompressionSessionDecodeFrameCallback(void *decompressionOutputRefCon,
void *sourceFrameRefCon,
OSStatus status,
VTDecodeInfoFlags infoFlags,
CVImageBufferRef imageBuffer,
CMTime presentationTimeStamp,
CMTime presentationDuration)
{
THISCLASSNAME *streamManager = (__bridge THISCLASSNAME *)decompressionOutputRefCon;
if (status != noErr)
{
NSError *error = [NSError errorWithDomain:NSOSStatusErrorDomain code:status userInfo:nil];
NSLog(@"Decompressed error: %@", error);
}
else
{
NSLog(@"Decompressed sucessfully");
// do something with your resulting CVImageBufferRef that is your decompressed frame
[streamManager displayDecodedFrame:imageBuffer];
}
}
This is where we actually send the sampleBuffer off to the VTD to be decoded.
- (void) render:(CMSampleBufferRef)sampleBuffer
{
VTDecodeFrameFlags flags = kVTDecodeFrame_EnableAsynchronousDecompression;
VTDecodeInfoFlags flagOut;
NSDate* currentTime = [NSDate date];
VTDecompressionSessionDecodeFrame(_decompressionSession, sampleBuffer, flags,
(void*)CFBridgingRetain(currentTime), &flagOut);
CFRelease(sampleBuffer);
// if you're using AVSampleBufferDisplayLayer, you only need to use this line of code
// [videoLayer enqueueSampleBuffer:sampleBuffer];
}
If you're using AVSampleBufferDisplayLayer, be sure to init the layer like this, inside viewDidLoad or some other init method.
-(void) viewDidLoad
{
// create our AVSampleBufferDisplayLayer and add it to the view
videoLayer = [[AVSampleBufferDisplayLayer alloc] init];
videoLayer.frame = self.view.frame;
videoLayer.bounds = self.view.bounds;
videoLayer.videoGravity = AVLayerVideoGravityResizeAspect;
// set Timebase, you may need this if you need to display frames at specific times
// I didn't need it so I haven't verified that the timebase is working
CMTimebaseRef controlTimebase;
CMTimebaseCreateWithMasterClock(CFAllocatorGetDefault(), CMClockGetHostTimeClock(), &controlTimebase);
//videoLayer.controlTimebase = controlTimebase;
CMTimebaseSetTime(self.videoLayer.controlTimebase, kCMTimeZero);
CMTimebaseSetRate(self.videoLayer.controlTimebase, 1.0);
[[self.view layer] addSublayer:videoLayer];
}
Upvotes: 221
Cherpak Evgeny
Reputation: 2770
This post helped me a lot with sending H264 video from one device to another, but switching between devices caused the function receivedRawVideoFrame to not work correctly due to some changes in the frame data.
Here is my final function that decodes NAL units from the data directly, but doesn't rely on the order in the data frame
- (void)receivedRawVideoFrame:(NSData*)frameData {
NSUInteger frameSize = [frameData length];
const uint8_t * frame = [frameData bytes];
NSMutableDictionary* nalUnitsStart = [NSMutableDictionary dictionary];
NSMutableDictionary* nalUnitsEnd = [NSMutableDictionary dictionary];
uint8_t previousNalUnitType = 0;
for ( NSUInteger offset = 0; offset < frameSize - 4; offset++ ) {
// Find the start on NAL unit
if (frame[offset] == 0x00 && frame[offset+1] == 0x00 && frame[offset+2] == 0x00 && frame[offset+3] == 0x01) {
uint8_t nalType = frame[offset + 4] & 0x1F;
// Record the end of previous NAL unit
nalUnitsEnd[@(previousNalUnitType)] = @(offset);
previousNalUnitType = nalType;
nalUnitsStart[@(nalType)] = @(offset + 4);
}
}
// Record the end of the last NAL unit
nalUnitsEnd[@(previousNalUnitType)] = @(frameSize);
// Let's check if our data contains SPS && PPS NAL Units
NSNumber* spsOffset = nalUnitsStart[@(NAL_TYPE_SPS)];
NSNumber* ppsOffset = nalUnitsStart[@(NAL_TYPE_PPS)];
if ( spsOffset && ppsOffset ) {
NSNumber* spsEnd = nalUnitsEnd[@(NAL_TYPE_SPS)];
NSNumber* ppsEnd = nalUnitsEnd[@(NAL_TYPE_PPS)];
NSAssert(spsEnd && ppsEnd, @" [DECODE]: Missing the end of NAL unit(s)");
uint8_t *pps = NULL;
uint8_t *sps = NULL;
int spsSize = (int)(spsEnd.unsignedIntegerValue - spsOffset.unsignedIntegerValue);
int ppsSize = (int)(ppsEnd.unsignedIntegerValue - ppsOffset.unsignedIntegerValue);
// allocate enough data to fit the SPS and PPS parameters into our data objects.
// VTD doesn't want you to include the start code header (4 bytes long) so we add the - 4 here
sps = malloc(spsSize);
pps = malloc(ppsSize);
// copy in the actual sps and pps values, again ignoring the 4 byte header
memcpy(sps, &frame[spsOffset.unsignedIntegerValue], spsSize);
memcpy(pps, &frame[ppsOffset.unsignedIntegerValue], ppsSize);
// now we set our H264 parameters
uint8_t* parameterSetPointers[2] = {sps, pps};
size_t parameterSetSizes[2] = {spsSize, ppsSize};
OSStatus status = CMVideoFormatDescriptionCreateFromH264ParameterSets(kCFAllocatorDefault,
2,
(const uint8_t *const*)parameterSetPointers,
parameterSetSizes,
4,
&_formatDesc);
if (sps != NULL) free(sps);
if (pps != NULL) free(pps);
DebugAssert(status == noErr, @" [DECODE]: Failed to create CMVideoFormatDescription for H264");
if ( status != noErr ) {
NSLog(@" [DECODE]: Failed to create CMVideoFormatDescription for H264");
} else {
// Good place to re-create our decompression session
[self destroySession];
}
}
// Loop over all NAL units we have while ignoring everything with type < 5
for ( NSNumber* nalType in nalUnitsStart.allKeys ) {
if ( nalType.intValue > 5 ) {
continue;
}
// Get the header too (0x00000001), that will be replaced with the NAL unit size
NSNumber* nalStart = nalUnitsStart[nalType];
NSNumber* nalEnd = nalUnitsEnd[nalType];
size_t blockLength = nalEnd.unsignedIntegerValue - (nalStart.unsignedIntegerValue - sizeof(uint32_t));
uint8_t *data = malloc(blockLength);
memcpy(data, &frame[nalStart.unsignedIntegerValue - sizeof(uint32_t)], blockLength);
// replace the start code header on this NALU with its size.
// AVCC format requires that you do this.
// htonl converts the unsigned int from host to network byte order
uint32_t dataLength32 = htonl(blockLength - 4);
memcpy(data, &dataLength32, sizeof(uint32_t));
CMBlockBufferRef blockBuffer;
OSStatus status = CMBlockBufferCreateWithMemoryBlock(NULL,
data,
blockLength,
kCFAllocatorNull,
NULL,
0,
blockLength,
0,
&blockBuffer);
DebugAssert(status == noErr, @" [DECODE]: Failed to create CMBlockBufferRef for %@", nalType);
if ( status != noErr ) {
NSLog(@" [DECODE]: Failed to create CMBlockBufferRef for H264 for %@", nalType);
} else {
const size_t sampleSize = blockLength;
/* NOTE:
We are not responsible for releasing sample buffer,
it will be released by the decompress frame function
after it has been decoded!
*/
CMSampleBufferRef sampleBuffer;
status = CMSampleBufferCreate(kCFAllocatorDefault,
blockBuffer,
true,
NULL,
NULL,
_formatDesc,
1,
0,
NULL,
1,
&sampleSize,
&sampleBuffer);
DebugAssert(status == noErr, @" [DECODE]: Failed to create CMSampleBufferRef for %@", nalType);
if ( status != noErr ) {
NSLog(@" [DECODE]: Failed to create CMSampleBufferRef for H264 for %@", nalType);
if ( sampleBuffer ) {
CFRelease(sampleBuffer);
sampleBuffer = NULL;
}
} else {
// set some values of the sample buffer's attachments
CFArrayRef attachments = CMSampleBufferGetSampleAttachmentsArray(sampleBuffer, YES);
CFMutableDictionaryRef dict = (CFMutableDictionaryRef)CFArrayGetValueAtIndex(attachments, 0);
CFDictionarySetValue(dict, kCMSampleAttachmentKey_DisplayImmediately, kCFBooleanTrue);
[self decompressFrame:sampleBuffer];
}
}
if ( blockBuffer ) {
CFRelease(blockBuffer);
blockBuffer = NULL;
}
if ( data != NULL ) {
free(data);
data = NULL;
}
}
}
decompressFrame function is responsible for creating a new decompression session when it needs to based on the latest CMVideoFormatDescriptionRef data we got from our stream.
Upvotes: 1
RobX
Reputation: 51
Thanks to Olivia for this great and detailed post! I recently started to program a streaming app on iPad Pro with Xamarin forms and this article helped a lot and I found many references to it throughout the web.
I suppose many people re-wrote Olivia's example in Xamarin already and I don't claim to be the best programmer in the world. But as nobody posted a C#/Xamarin version here yet and I would like to give something back to the community for the great post above, here is my C# / Xamarin version. Maybe it helps someone to to speed up progress in her or his project.
I kept close to Olivia's example, I even kept most of her comments.
First, for I prefer dealing with enums rather than numbers, I declared this NALU enum. For the sake of completeness I also added some "exotic" NALU types I found on the internet:
public enum NALUnitType : byte
{
NALU_TYPE_UNKNOWN = 0,
NALU_TYPE_SLICE = 1,
NALU_TYPE_DPA = 2,
NALU_TYPE_DPB = 3,
NALU_TYPE_DPC = 4,
NALU_TYPE_IDR = 5,
NALU_TYPE_SEI = 6,
NALU_TYPE_SPS = 7,
NALU_TYPE_PPS = 8,
NALU_TYPE_AUD = 9,
NALU_TYPE_EOSEQ = 10,
NALU_TYPE_EOSTREAM = 11,
NALU_TYPE_FILL = 12,
NALU_TYPE_13 = 13,
NALU_TYPE_14 = 14,
NALU_TYPE_15 = 15,
NALU_TYPE_16 = 16,
NALU_TYPE_17 = 17,
NALU_TYPE_18 = 18,
NALU_TYPE_19 = 19,
NALU_TYPE_20 = 20,
NALU_TYPE_21 = 21,
NALU_TYPE_22 = 22,
NALU_TYPE_23 = 23,
NALU_TYPE_STAP_A = 24,
NALU_TYPE_STAP_B = 25,
NALU_TYPE_MTAP16 = 26,
NALU_TYPE_MTAP24 = 27,
NALU_TYPE_FU_A = 28,
NALU_TYPE_FU_B = 29,
}
More or less for convenience reasons I also defined an additional dictionary for the NALU descriptions:
public static Dictionary<NALUnitType, string> GetDescription { get; } =
new Dictionary<NALUnitType, string>()
{
{ NALUnitType.NALU_TYPE_UNKNOWN, "Unspecified (non-VCL)" },
{ NALUnitType.NALU_TYPE_SLICE, "Coded slice of a non-IDR picture (VCL) [P-frame]" },
{ NALUnitType.NALU_TYPE_DPA, "Coded slice data partition A (VCL)" },
{ NALUnitType.NALU_TYPE_DPB, "Coded slice data partition B (VCL)" },
{ NALUnitType.NALU_TYPE_DPC, "Coded slice data partition C (VCL)" },
{ NALUnitType.NALU_TYPE_IDR, "Coded slice of an IDR picture (VCL) [I-frame]" },
{ NALUnitType.NALU_TYPE_SEI, "Supplemental Enhancement Information [SEI] (non-VCL)" },
{ NALUnitType.NALU_TYPE_SPS, "Sequence Parameter Set [SPS] (non-VCL)" },
{ NALUnitType.NALU_TYPE_PPS, "Picture Parameter Set [PPS] (non-VCL)" },
{ NALUnitType.NALU_TYPE_AUD, "Access Unit Delimiter [AUD] (non-VCL)" },
{ NALUnitType.NALU_TYPE_EOSEQ, "End of Sequence (non-VCL)" },
{ NALUnitType.NALU_TYPE_EOSTREAM, "End of Stream (non-VCL)" },
{ NALUnitType.NALU_TYPE_FILL, "Filler data (non-VCL)" },
{ NALUnitType.NALU_TYPE_13, "Sequence Parameter Set Extension (non-VCL)" },
{ NALUnitType.NALU_TYPE_14, "Prefix NAL Unit (non-VCL)" },
{ NALUnitType.NALU_TYPE_15, "Subset Sequence Parameter Set (non-VCL)" },
{ NALUnitType.NALU_TYPE_16, "Reserved (non-VCL)" },
{ NALUnitType.NALU_TYPE_17, "Reserved (non-VCL)" },
{ NALUnitType.NALU_TYPE_18, "Reserved (non-VCL)" },
{ NALUnitType.NALU_TYPE_19, "Coded slice of an auxiliary coded picture without partitioning (non-VCL)" },
{ NALUnitType.NALU_TYPE_20, "Coded Slice Extension (non-VCL)" },
{ NALUnitType.NALU_TYPE_21, "Coded Slice Extension for Depth View Components (non-VCL)" },
{ NALUnitType.NALU_TYPE_22, "Reserved (non-VCL)" },
{ NALUnitType.NALU_TYPE_23, "Reserved (non-VCL)" },
{ NALUnitType.NALU_TYPE_STAP_A, "STAP-A Single-time Aggregation Packet (non-VCL)" },
{ NALUnitType.NALU_TYPE_STAP_B, "STAP-B Single-time Aggregation Packet (non-VCL)" },
{ NALUnitType.NALU_TYPE_MTAP16, "MTAP16 Multi-time Aggregation Packet (non-VCL)" },
{ NALUnitType.NALU_TYPE_MTAP24, "MTAP24 Multi-time Aggregation Packet (non-VCL)" },
{ NALUnitType.NALU_TYPE_FU_A, "FU-A Fragmentation Unit (non-VCL)" },
{ NALUnitType.NALU_TYPE_FU_B, "FU-B Fragmentation Unit (non-VCL)" }
};
Here comes my main decoding procedure. I assume the received frame as raw byte array:
public void Decode(byte[] frame)
{
uint frameSize = (uint)frame.Length;
SendDebugMessage($"Received frame of {frameSize} bytes.");
// I know how my H.264 data source's NALUs looks like so I know start code index is always 0.
// if you don't know where it starts, you can use a for loop similar to how I find the 2nd and 3rd start codes
uint firstStartCodeIndex = 0;
uint secondStartCodeIndex = 0;
uint thirdStartCodeIndex = 0;
// length of NALU start code in bytes.
// for h.264 the start code is 4 bytes and looks like this: 0 x 00 00 00 01
const uint naluHeaderLength = 4;
// check the first 8bits after the NALU start code, mask out bits 0-2, the NALU type ID is in bits 3-7
uint startNaluIndex = firstStartCodeIndex + naluHeaderLength;
byte startByte = frame[startNaluIndex];
int naluTypeId = startByte & 0x1F; // 0001 1111
NALUnitType naluType = (NALUnitType)naluTypeId;
SendDebugMessage($"1st Start Code Index: {firstStartCodeIndex}");
SendDebugMessage($"1st NALU Type: '{NALUnit.GetDescription[naluType]}' ({(int)naluType})");
// bits 1 and 2 are the NRI
int nalRefIdc = startByte & 0x60; // 0110 0000
SendDebugMessage($"1st NRI (NAL Ref Idc): {nalRefIdc}");
// IF the very first NALU type is an IDR -> handle it like a slice frame (-> re-cast it to type 1 [Slice])
if (naluType == NALUnitType.NALU_TYPE_IDR)
{
naluType = NALUnitType.NALU_TYPE_SLICE;
}
// if we haven't already set up our format description with our SPS PPS parameters,
// we can't process any frames except type 7 that has our parameters
if (naluType != NALUnitType.NALU_TYPE_SPS && this.FormatDescription == null)
{
SendDebugMessage("Video Error: Frame is not an I-Frame and format description is null.");
return;
}
// NALU type 7 is the SPS parameter NALU
if (naluType == NALUnitType.NALU_TYPE_SPS)
{
// find where the second PPS 4byte start code begins (0x00 00 00 01)
// from which we also get the length of the first SPS code
for (uint i = firstStartCodeIndex + naluHeaderLength; i < firstStartCodeIndex + 40; i++)
{
if (frame[i] == 0x00 && frame[i + 1] == 0x00 && frame[i + 2] == 0x00 && frame[i + 3] == 0x01)
{
secondStartCodeIndex = i;
this.SpsSize = secondStartCodeIndex; // includes the header in the size
SendDebugMessage($"2nd Start Code Index: {secondStartCodeIndex} -> SPS Size: {this.SpsSize}");
break;
}
}
// find what the second NALU type is
startByte = frame[secondStartCodeIndex + naluHeaderLength];
naluType = (NALUnitType)(startByte & 0x1F);
SendDebugMessage($"2nd NALU Type: '{NALUnit.GetDescription[naluType]}' ({(int)naluType})");
// bits 1 and 2 are the NRI
nalRefIdc = startByte & 0x60; // 0110 0000
SendDebugMessage($"2nd NRI (NAL Ref Idc): {nalRefIdc}");
}
// type 8 is the PPS parameter NALU
if (naluType == NALUnitType.NALU_TYPE_PPS)
{
// find where the NALU after this one starts so we know how long the PPS parameter is
for (uint i = this.SpsSize + naluHeaderLength; i < this.SpsSize + 30; i++)
{
if (frame[i] == 0x00 && frame[i + 1] == 0x00 && frame[i + 2] == 0x00 && frame[i + 3] == 0x01)
{
thirdStartCodeIndex = i;
this.PpsSize = thirdStartCodeIndex - this.SpsSize;
SendDebugMessage($"3rd Start Code Index: {thirdStartCodeIndex} -> PPS Size: {this.PpsSize}");
break;
}
}
// allocate enough data to fit the SPS and PPS parameters into our data objects.
// VTD doesn't want you to include the start code header (4 bytes long) so we subtract 4 here
byte[] sps = new byte[this.SpsSize - naluHeaderLength];
byte[] pps = new byte[this.PpsSize - naluHeaderLength];
// copy in the actual sps and pps values, again ignoring the 4 byte header
Array.Copy(frame, naluHeaderLength, sps, 0, sps.Length);
Array.Copy(frame, this.SpsSize + naluHeaderLength, pps,0, pps.Length);
// create video format description
List<byte[]> parameterSets = new List<byte[]> { sps, pps };
this.FormatDescription = CMVideoFormatDescription.FromH264ParameterSets(parameterSets, (int)naluHeaderLength, out CMFormatDescriptionError formatDescriptionError);
SendDebugMessage($"Creation of CMVideoFormatDescription: {((formatDescriptionError == CMFormatDescriptionError.None)? $"Successful! (Video Codec = {this.FormatDescription.VideoCodecType}, Dimension = {this.FormatDescription.Dimensions.Height} x {this.FormatDescription.Dimensions.Width}px, Type = {this.FormatDescription.MediaType})" : $"Failed ({formatDescriptionError})")}");
// re-create the decompression session whenever new PPS data was received
this.DecompressionSession = this.CreateDecompressionSession(this.FormatDescription);
// now lets handle the IDR frame that (should) come after the parameter sets
// I say "should" because that's how I expect my H264 stream to work, YMMV
startByte = frame[thirdStartCodeIndex + naluHeaderLength];
naluType = (NALUnitType)(startByte & 0x1F);
SendDebugMessage($"3rd NALU Type: '{NALUnit.GetDescription[naluType]}' ({(int)naluType})");
// bits 1 and 2 are the NRI
nalRefIdc = startByte & 0x60; // 0110 0000
SendDebugMessage($"3rd NRI (NAL Ref Idc): {nalRefIdc}");
}
// type 5 is an IDR frame NALU.
// The SPS and PPS NALUs should always be followed by an IDR (or IFrame) NALU, as far as I know.
if (naluType == NALUnitType.NALU_TYPE_IDR || naluType == NALUnitType.NALU_TYPE_SLICE)
{
// find the offset or where IDR frame NALU begins (after the SPS and PPS NALUs end)
uint offset = (naluType == NALUnitType.NALU_TYPE_SLICE)? 0 : this.SpsSize + this.PpsSize;
uint blockLength = frameSize - offset;
SendDebugMessage($"Block Length (NALU type '{naluType}'): {blockLength}");
var blockData = new byte[blockLength];
Array.Copy(frame, offset, blockData, 0, blockLength);
// write the size of the block length (IDR picture data) at the beginning of the IDR block.
// this means we replace the start code header (0 x 00 00 00 01) of the IDR NALU with the block size.
// AVCC format requires that you do this.
// This next block is very specific to my application and wasn't in Olivia's example:
// For my stream is encoded by NVIDEA NVEC I had to deal with additional 3-byte start codes within my IDR/SLICE frame.
// These start codes must be replaced by 4 byte start codes adding the block length as big endian.
// ======================================================================================================================================================
// find all 3 byte start code indices (0x00 00 01) within the block data (including the first 4 bytes of NALU header)
uint startCodeLength = 3;
List<uint> foundStartCodeIndices = new List<uint>();
for (uint i = 0; i < blockData.Length; i++)
{
if (blockData[i] == 0x00 && blockData[i + 1] == 0x00 && blockData[i + 2] == 0x01)
{
foundStartCodeIndices.Add(i);
byte naluByte = blockData[i + startCodeLength];
var tmpNaluType = (NALUnitType)(naluByte & 0x1F);
SendDebugMessage($"3-Byte Start Code (0x000001) found at index: {i} (NALU type {(int)tmpNaluType} '{NALUnit.GetDescription[tmpNaluType]}'");
}
}
// determine the byte length of each slice
uint totalLength = 0;
List<uint> sliceLengths = new List<uint>();
for (int i = 0; i < foundStartCodeIndices.Count; i++)
{
// for convenience only
bool isLastValue = (i == foundStartCodeIndices.Count-1);
// start-index to bit right after the start code
uint startIndex = foundStartCodeIndices[i] + startCodeLength;
// set end-index to bit right before beginning of next start code or end of frame
uint endIndex = isLastValue ? (uint) blockData.Length : foundStartCodeIndices[i + 1];
// now determine slice length including NALU header
uint sliceLength = (endIndex - startIndex) + naluHeaderLength;
// add length to list
sliceLengths.Add(sliceLength);
// sum up total length of all slices (including NALU header)
totalLength += sliceLength;
}
// Arrange slices like this:
// [4byte slice1 size][slice1 data][4byte slice2 size][slice2 data]...[4byte slice4 size][slice4 data]
// Replace 3-Byte Start Code with 4-Byte start code, then replace the 4-Byte start codes with the length of the following data block (big endian).
// https://stackoverflow.com/questions/65576349/nvidia-nvenc-media-foundation-encoded-h-264-frames-not-decoded-properly-using
byte[] finalBuffer = new byte[totalLength];
uint destinationIndex = 0;
// create a buffer for each slice and append it to the final block buffer
for (int i = 0; i < sliceLengths.Count; i++)
{
// create byte vector of size of current slice, add additional bytes for NALU start code length
byte[] sliceData = new byte[sliceLengths[i]];
// now copy the data of current slice into the byte vector,
// start reading data after the 3-byte start code
// start writing data after NALU start code,
uint sourceIndex = foundStartCodeIndices[i] + startCodeLength;
long dataLength = sliceLengths[i] - naluHeaderLength;
Array.Copy(blockData, sourceIndex, sliceData, naluHeaderLength, dataLength);
// replace the NALU start code with data length as big endian
byte[] sliceLengthInBytes = BitConverter.GetBytes(sliceLengths[i] - naluHeaderLength);
Array.Reverse(sliceLengthInBytes);
Array.Copy(sliceLengthInBytes, 0, sliceData, 0, naluHeaderLength);
// add the slice data to final buffer
Array.Copy(sliceData, 0, finalBuffer, destinationIndex, sliceData.Length);
destinationIndex += sliceLengths[i];
}
// ======================================================================================================================================================
// from here we are back on track with Olivia's code:
// now create block buffer from final byte[] buffer
CMBlockBufferFlags flags = CMBlockBufferFlags.AssureMemoryNow | CMBlockBufferFlags.AlwaysCopyData;
var finalBlockBuffer = CMBlockBuffer.FromMemoryBlock(finalBuffer, 0, flags, out CMBlockBufferError blockBufferError);
SendDebugMessage($"Creation of Final Block Buffer: {(blockBufferError == CMBlockBufferError.None ? "Successful!" : $"Failed ({blockBufferError})")}");
if (blockBufferError != CMBlockBufferError.None) return;
// now create the sample buffer
nuint[] sampleSizeArray = new nuint[] { totalLength };
CMSampleBuffer sampleBuffer = CMSampleBuffer.CreateReady(finalBlockBuffer, this.FormatDescription, 1, null, sampleSizeArray, out CMSampleBufferError sampleBufferError);
SendDebugMessage($"Creation of Final Sample Buffer: {(sampleBufferError == CMSampleBufferError.None ? "Successful!" : $"Failed ({sampleBufferError})")}");
if (sampleBufferError != CMSampleBufferError.None) return;
// if sample buffer was successfully created -> pass sample to decoder
// set sample attachments
CMSampleBufferAttachmentSettings[] attachments = sampleBuffer.GetSampleAttachments(true);
var attachmentSetting = attachments[0];
attachmentSetting.DisplayImmediately = true;
// enable async decoding
VTDecodeFrameFlags decodeFrameFlags = VTDecodeFrameFlags.EnableAsynchronousDecompression;
// add time stamp
var currentTime = DateTime.Now;
var currentTimePtr = new IntPtr(currentTime.Ticks);
// send the sample buffer to a VTDecompressionSession
var result = DecompressionSession.DecodeFrame(sampleBuffer, decodeFrameFlags, currentTimePtr, out VTDecodeInfoFlags decodeInfoFlags);
if (result == VTStatus.Ok)
{
SendDebugMessage($"Executing DecodeFrame(..): Successful! (Info: {decodeInfoFlags})");
}
else
{
NSError error = new NSError(CFErrorDomain.OSStatus, (int)result);
SendDebugMessage($"Executing DecodeFrame(..): Failed ({(VtStatusEx)result} [0x{(int)result:X8}] - {error}) - Info: {decodeInfoFlags}");
}
}
}
My function to create the decompression session looks like this:
private VTDecompressionSession CreateDecompressionSession(CMVideoFormatDescription formatDescription)
{
VTDecompressionSession.VTDecompressionOutputCallback callBackRecord = this.DecompressionSessionDecodeFrameCallback;
VTVideoDecoderSpecification decoderSpecification = new VTVideoDecoderSpecification
{
EnableHardwareAcceleratedVideoDecoder = true
};
CVPixelBufferAttributes destinationImageBufferAttributes = new CVPixelBufferAttributes();
try
{
var decompressionSession = VTDecompressionSession.Create(callBackRecord, formatDescription, decoderSpecification, destinationImageBufferAttributes);
SendDebugMessage("Video Decompression Session Creation: Successful!");
return decompressionSession;
}
catch (Exception e)
{
SendDebugMessage($"Video Decompression Session Creation: Failed ({e.Message})");
return null;
}
}
The decompression session callback routine:
private void DecompressionSessionDecodeFrameCallback(
IntPtr sourceFrame,
VTStatus status,
VTDecodeInfoFlags infoFlags,
CVImageBuffer imageBuffer,
CMTime presentationTimeStamp,
CMTime presentationDuration)
{
if (status != VTStatus.Ok)
{
NSError error = new NSError(CFErrorDomain.OSStatus, (int)status);
SendDebugMessage($"Decompression: Failed ({(VtStatusEx)status} [0x{(int)status:X8}] - {error})");
}
else
{
SendDebugMessage("Decompression: Successful!");
try
{
var image = GetImageFromImageBuffer(imageBuffer);
// In my application I do not use a display layer but send the decoded image directly by an event:
ImageSource imgSource = ImageSource.FromStream(() => image.AsPNG().AsStream());
OnImageFrameReady?.Invoke(imgSource);
}
catch (Exception e)
{
SendDebugMessage(e.ToString());
}
}
}
I use this function to convert the CVImageBuffer to an UIImage. It also refers to one of Olivia's posts mentioned above (how to convert a CVImageBufferRef to UIImage):
private UIImage GetImageFromImageBuffer(CVImageBuffer imageBuffer)
{
if (!(imageBuffer is CVPixelBuffer pixelBuffer)) return null;
var ciImage = CIImage.FromImageBuffer(pixelBuffer);
var temporaryContext = new CIContext();
var rect = CGRect.FromLTRB(0, 0, pixelBuffer.Width, pixelBuffer.Height);
CGImage cgImage = temporaryContext.CreateCGImage(ciImage, rect);
if (cgImage == null) return null;
var uiImage = UIImage.FromImage(cgImage);
cgImage.Dispose();
return uiImage;
}
Last but not least my tiny little function for debug output, feel free to pimp it as needed for your purpose ;-)
private void SendDebugMessage(string msg)
{
Debug.WriteLine($"VideoDecoder (iOS) - {msg}");
}
Finally, let's have a look at the namespaces used for the code above:
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.IO;
using System.Net;
using AvcLibrary;
using CoreFoundation;
using CoreGraphics;
using CoreImage;
using CoreMedia;
using CoreVideo;
using Foundation;
using UIKit;
using VideoToolbox;
using Xamarin.Forms;
Upvotes: 3
Olivia Stork
Reputation: 4809
If you can't find the VTD error codes in the framework, I decided to just include them here. (Again, all these errors and more can be found inside the VideoToolbox.framework itself in the project navigator, in the file VTErrors.h.)
You will get one of these error codes either in the the VTD decode frame callback or when you create your VTD session if you did something incorrectly.
kVTPropertyNotSupportedErr = -12900,
kVTPropertyReadOnlyErr = -12901,
kVTParameterErr = -12902,
kVTInvalidSessionErr = -12903,
kVTAllocationFailedErr = -12904,
kVTPixelTransferNotSupportedErr = -12905, // c.f. -8961
kVTCouldNotFindVideoDecoderErr = -12906,
kVTCouldNotCreateInstanceErr = -12907,
kVTCouldNotFindVideoEncoderErr = -12908,
kVTVideoDecoderBadDataErr = -12909, // c.f. -8969
kVTVideoDecoderUnsupportedDataFormatErr = -12910, // c.f. -8970
kVTVideoDecoderMalfunctionErr = -12911, // c.f. -8960
kVTVideoEncoderMalfunctionErr = -12912,
kVTVideoDecoderNotAvailableNowErr = -12913,
kVTImageRotationNotSupportedErr = -12914,
kVTVideoEncoderNotAvailableNowErr = -12915,
kVTFormatDescriptionChangeNotSupportedErr = -12916,
kVTInsufficientSourceColorDataErr = -12917,
kVTCouldNotCreateColorCorrectionDataErr = -12918,
kVTColorSyncTransformConvertFailedErr = -12919,
kVTVideoDecoderAuthorizationErr = -12210,
kVTVideoEncoderAuthorizationErr = -12211,
kVTColorCorrectionPixelTransferFailedErr = -12212,
kVTMultiPassStorageIdentifierMismatchErr = -12213,
kVTMultiPassStorageInvalidErr = -12214,
kVTFrameSiloInvalidTimeStampErr = -12215,
kVTFrameSiloInvalidTimeRangeErr = -12216,
kVTCouldNotFindTemporalFilterErr = -12217,
kVTPixelTransferNotPermittedErr = -12218,
Upvotes: 21
Kris Dude
Reputation: 388
@Livy to remove memory leaks before CMVideoFormatDescriptionCreateFromH264ParameterSets you should add the following:
if (_formatDesc) {
CFRelease(_formatDesc);
_formatDesc = NULL;
}
Upvotes: 2
leppert
Reputation: 805
A good Swift example of much of this can be found in Josh Baker's Avios library: https://github.com/tidwall/Avios
Note that Avios currently expects the user to handle chunking data at NAL start codes, but does handle decoding the data from that point forward.
Also worth a look is the Swift based RTMP library HaishinKit (formerly "LF"), which has its own decoding implementation, including more robust NALU parsing: https://github.com/shogo4405/lf.swift
Upvotes: 11
Jetdog
Reputation: 91
In addition to VTErrors above, I thought it's worth adding CMFormatDescription, CMBlockBuffer, CMSampleBuffer errors that you may encounter while trying Livy's example.
kCMFormatDescriptionError_InvalidParameter = -12710,
kCMFormatDescriptionError_AllocationFailed = -12711,
kCMFormatDescriptionError_ValueNotAvailable = -12718,
kCMBlockBufferNoErr = 0,
kCMBlockBufferStructureAllocationFailedErr = -12700,
kCMBlockBufferBlockAllocationFailedErr = -12701,
kCMBlockBufferBadCustomBlockSourceErr = -12702,
kCMBlockBufferBadOffsetParameterErr = -12703,
kCMBlockBufferBadLengthParameterErr = -12704,
kCMBlockBufferBadPointerParameterErr = -12705,
kCMBlockBufferEmptyBBufErr = -12706,
kCMBlockBufferUnallocatedBlockErr = -12707,
kCMBlockBufferInsufficientSpaceErr = -12708,
kCMSampleBufferError_AllocationFailed = -12730,
kCMSampleBufferError_RequiredParameterMissing = -12731,
kCMSampleBufferError_AlreadyHasDataBuffer = -12732,
kCMSampleBufferError_BufferNotReady = -12733,
kCMSampleBufferError_SampleIndexOutOfRange = -12734,
kCMSampleBufferError_BufferHasNoSampleSizes = -12735,
kCMSampleBufferError_BufferHasNoSampleTimingInfo = -12736,
kCMSampleBufferError_ArrayTooSmall = -12737,
kCMSampleBufferError_InvalidEntryCount = -12738,
kCMSampleBufferError_CannotSubdivide = -12739,
kCMSampleBufferError_SampleTimingInfoInvalid = -12740,
kCMSampleBufferError_InvalidMediaTypeForOperation = -12741,
kCMSampleBufferError_InvalidSampleData = -12742,
kCMSampleBufferError_InvalidMediaFormat = -12743,
kCMSampleBufferError_Invalidated = -12744,
kCMSampleBufferError_DataFailed = -16750,
kCMSampleBufferError_DataCanceled = -16751,
Upvotes: 5
Related Questions
- H264 Decoding with Apple Video Toolkit
- Error code -8969, -12909 while decoding h264 in iOS 8 with video tool box
- Decoding H264 VideoToolkit API fails with Error -12911 in VTDecompressionSessionDecodeFrame
- H264 encoding and decoding using Videotoolbox
- Dose all H.264 video stream can be decompressed using Video Toolbox in iOS 8?
- How to hardcode a MP4 stream file with iOS VideoToolbox and FFMPEG?
- VideoToolbox in iOS 6
- How to play H264 Video file using VideoToolbox.framework in iOS 8?
- H.264 : VTDecompressionSessionDecodeFrame fails with code 12909
- Decoding h264 in iOS 8 with video tool box