artificial-intelligencepath-findingheuristicspacman

Reputation: 52229

Pacman: how do the eyes find their way back to the monster hole?

I found a lot of references to the AI of the ghosts in Pacman, but none of them mentioned how the eyes find their way back to the central ghost hole after a ghost is eaten by Pacman.

In my implementation I implemented a simple but awful solution. I just hard coded on every corner which direction should be taken.

Are there any better/or the best solution? Maybe a generic one that works with different level designs?

Upvotes: 323

Answers (23)

pogeybait

Reputation: 3145

According to a lot of what I've read, including the Pac-Man dossier, it would appear the ghosts target the grid directly above the ghost house "door" and use the normal movement restrictions that they normally use for normal movement.

Upvotes: 0

Kylotan

Reputation: 18449

Actually, I'd say your approach is a pretty awesome solution, with almost zero-run time cost compared to any sort of pathfinding.

If you need it to generalise to arbitrary maps, you could use any pathfinding algorithm - breadth-first search is simple to implement, for example - and use that to calculate which directions to encode at each of the corners, before the game is run.

EDIT (11th August 2010): I was just referred to a very detailed page on the Pacman system: The Pac-Man Dossier, and since I have the accepted answer here, I felt I should update it. The article doesn't seem to cover the act of returning to the monster house explicitly but it states that the direct pathfinding in Pac-Man is a case of the following:

continue moving towards the next intersection (although this is essentially a special case of 'when given a choice, choose the direction that doesn't involve reversing your direction, as seen in the next step);
at the intersection, look at the adjacent exit squares, except the one you just came from;
picking one which is nearest the goal. If more than one is equally near the goal, pick the first valid direction in this order: up, left, down, right.

Upvotes: 154

charles-allen

Reputation: 4081

My approach is a little memory intensive (from the perspective of Pacman era), but you only need to compute once and it works for any level design (including jumps).

Label Nodes Once

When you first load a level, label all the monster lair nodes 0 (representing the distance from the lair). Proceed outward labelling connected nodes 1, nodes connected to them 2, and so on, until all nodes are labelled. (note: this even works if the lair has multiple entrances)

I'm assuming you already have objects representing each node and connections to their neighbours. Pseudo code might look something like this:

public void fillMap(List<Node> nodes) { // call passing lairNodes
    int i = 0;

    while(nodes.count > 0) {
        // Label with distance from lair
        nodes.labelAll(i++);

        // Find connected unlabelled nodes
        nodes = nodes
            .flatMap(n -> n.neighbours)
            .filter(!n.isDistanceAssigned());
    }
}

Eyes Move to Neighbour with Lowest Distance Label

Once all the nodes are labelled, routing the eyes is trivial... just pick the neighbouring node with the lowest distance label (note: if multiple nodes have equal distance, it doesn't matter which is picked). Pseudo code:

public Node moveEyes(final Node current) {
    return current.neighbours.min((n1, n2) -> n1.distance - n2.distance);
}

Fully Labelled Example

Upvotes: 1

iNyuu

Reputation: 72

For my PacMan game I made a somewhat "shortest multiple path home" algorithm which works for what ever labyrinth I provide it with (within my set of rules). It also works across them tunnels.

When the level is loaded, all the path home data in every crossroad is empty (default) and once the ghosts start to explore the labyrinth, them crossroad path home information keeps getting updated every time they run into a "new" crossroad or from a different path stumble again upon their known crossroad.

Upvotes: 0

user4664601

Reputation: 9

The original pac-man didn't use path-finding or fancy AI. It just made gamers believe there is more depth to it than it actually was, but in fact it was random. As stated in Artificial Intelligence for Games/Ian Millington, John Funge.

Not sure if it's true or not, but it makes a lot of sense to me. Honestly, I don't see these behaviors that people are talking about. Red/Blinky for ex is not following the player at all times, as they say. Nobody seems to be consistently following the player, on purpose. The chance that they will follow you looks random to me. And it's just very tempting to see behavior in randomness, especially when the chances of getting chased are very high, with 4 enemies and very limited turning options, in a small space. At least in its initial implementation, the game was extremely simple. Check out the book, it's in one of the first chapters.

Upvotes: -2

Fischer Ludrian

Reputation: 677

I would propose that the ghost stores the path he has taken from the hole to the Pacman. So as soon as the ghost dies, he can follow this stored path in the reverse direction.

Upvotes: 2

GingerHead

Reputation: 8230

Before the game begins save the nodes (intersections) in the map
When the monster dies take the point (coordinates) and find the nearest node in your node list
Calculate all the paths beginning from that node to the hole
Take the shortest path by length
Add the length of the space between the point and the nearest node
Draw and move on the path

Enjoy!

Upvotes: 1

Dan Vinton

Reputation: 26769

For an alternative to more traditional pathfinding algorithms, you could take a look at the (appropriately-named!) Pac-Man Scent Antiobject pattern.

You could diffuse monster-hole-scent around the maze at startup and have the eyes follow it home.

Once the smell is set up, runtime cost is very low.

Edit: sadly the wikipedia article has been deleted, so WayBack Machine to the rescue...

Upvotes: 42

dwidel

Reputation: 1294

Short answer, not very well. :) If you alter the Pac-man maze the eyes won't necessarily come back. Some of the hacks floating around have that problem. So it's dependent on having a cooperative maze.

Upvotes: 2

Midpipps

Reputation: 66

This was the best source that I could find on how it actually worked.

http://gameai.com/wiki/index.php?title=Pac-Man#Respawn When the ghosts are killed, their disembodied eyes return to their starting location. This is simply accomplished by setting the ghost's target tile to that location. The navigation uses the same rules.

It actually makes sense. Maybe not the most efficient in the world but a pretty nice way to not have to worry about another state or anything along those lines you are just changing the target.

Side note: I did not realize how awesome those pac-man programmers were they basically made an entire message system in a very small space with very limited memory ... that is amazing.

Upvotes: 3

imoatama

Reputation: 932

dtb23's suggestion of just picking a random direction at each corner, and eventually you'll find the monster-hole sounds horribly ineficient.

However you could make use of its inefficient return-to-home algorithm to make the game more fun by introducing more variation in the game difficulty. You'd do this by applying one of the above approaches such as your waypoints or the flood fill, but doing so non-deterministically. So at every corner, you could generate a random number to decide whether to take the optimal way, or a random direction.

As the player progresses levels, you reduce the likelihood that a random direction is taken. This would add another lever on the overall difficulty level in addition to the level speed, ghost speed, pill-eating pause (etc). You've got more time to relax while the ghosts are just harmless eyes, but that time becomes shorter and shorter as you progress.

Upvotes: 2

mvbl fst

Reputation: 5263

How about each square having a value of distance to the center? This way for each given square you can get values of immediate neighbor squares in all possible directions. You pick the square with the lowest value and move to that square.

Values would be pre-calculated using any available algorithm.

Upvotes: 3

Ivo Wetzel

Reputation: 46745

In the original Pacman the Ghost found the yellow pill eater by his "smell" he would leave a trace on the map, the ghost would wander around randomly until they found the smell, then they would simply follow the smell path which lead them directly to the player. Each time Pacman moved, the "smell values" would get decreased by 1.

Now, a simple way to reverse the whole process would be to have a "pyramid of ghost smell", which has its highest point at the center of the map, then the ghost just move in the direction of this smell.

Upvotes: 13

thyrgle

Reputation:

I don't know much on how you implemented your game but, you could do the following:

Determine the eyes location relative position to the gate. i.e. Is it left above? Right below?
Then move the eyes opposite one of the two directions (such as make it move left if it is right of the gate, and below the gate) and check if there are and walls preventing you from doing so.
If there are walls preventing you from doing so then make it move opposite the other direction (for example, if the coordinates of the eyes relative to the pin is right north and it was currently moving left but there is a wall in the way make it move south.
Remember to keep checking each time to move to keep checking where the eyes are in relative to the gate and check to see when there is no latitudinal coordinate. i.e. it is only above the gate.
In the case it is only above the gate move down if there is a wall, move either left or right and keep doing this number 1 - 4 until the eyes are in the den.
I've never seen a dead end in Pacman this code will not account for dead ends.
Also, I have included a solution to when the eyes would "wobble" between a wall that spans across the origin in my pseudocode.

Some pseudocode:

   x = getRelativeOppositeLatitudinalCoord()
   y
   origX = x
    while(eyesNotInPen())
       x = getRelativeOppositeLatitudinalCoordofGate()
       y = getRelativeOppositeLongitudinalCoordofGate()
       if (getRelativeOppositeLatitudinalCoordofGate() == 0 && move(y) == false/*assume zero is neither left or right of the the gate and false means wall is in the way */)
            while (move(y) == false)
                 move(origX)
                 x = getRelativeOppositeLatitudinalCoordofGate()
        else if (move(x) == false) {
            move(y)
    endWhile

Upvotes: 2

John Gardeniers

Reputation: 390

Assuming you already have the logic required for chasing pacman why not reuse that? Just change the target. Seems like it would be a lot less work than trying to create a whole new routine using the exact same logic.

Upvotes: 5

Mark Peters

Reputation: 81074

Here's an analog and pseudocode to ammoQ's flood fill idea.

queue q
enqueue q, ghost_origin
set visited

while q has squares
   p <= dequeue q
   for each square s adjacent to p
      if ( s not in visited ) then
         add s to visited
         s.returndirection <= direction from s to p
         enqueue q, s
      end if
   next
 next

The idea is that it's a breadth-first search, so each time you encounter a new adjacent square s, the best path is through p. It's O(N) I do believe.

Upvotes: 2

plinth

Reputation: 49179

The ghosts in pacman follow more or less predictable patterns in terms of trying to match on X or Y first until the goal was met. I always assumed that this was exactly the same for eyes finding their way back.

Upvotes: 1

Erich Kitzmueller

Reputation: 36977

I've solved this problem for generic levels that way: Before the level starts, I do some kind of "flood fill" from the monster hole; every tile of the maze that isn't a wall gets a number that says how far it is away from the hole. So when the eyes are on a tile with a distance of 68, they look which of the neighbouring tiles has a distance of 67; that's the way to go then.

Upvotes: 87

Incognito

Reputation: 20765

Knowing that pacman paths are non-random (ie, each specific level 0-255, inky, blinky, pinky, and clyde will work the exact same path for that level).

I would take this and then guess there are a few master paths that wraps around the entire maze as a "return path" that an eyeball object takes pending where it is when pac man ate the ghost.

Upvotes: 1

Hernán Eche

Reputation: 6899

I think your solution is right for the problem, simpler than that, is to make a new version more "realistic" where ghost eyes can go through walls =)

Upvotes: 2

Stephen C

Reputation: 718778

Any simple solution that works is maintainable, reliable and performs well enough is a good solution. It sounds to me like you have already found a good solution ...

An path-finding solution is likely to be more complicated than your current solution, and hence more likely to require debugging. It will probably also be slower.

IMO, if it ain't broken, don't fix it.

EDIT

IMO, if the maze is fixed then your current solution is good / elegant code. Don't make the mistake of equating "good" or "elegant" with "clever". Simple code can also be "good" and "elegant".

If you have configurable maze levels, then maybe you should just do the pathfinding when you initially configure the mazes. Simplest would be to get the maze designer to do it by hand. I'd only bother automating this if you have a bazillion mazes ... or users can design them.

(Aside: if the routes are configured by hand, the maze designer could make a level more interesting by using suboptimal routes ... )

Upvotes: 18