CODEWITHSUNDEEP
linuxubuntudockerdaemon
kramer65
kramer65

Reputation: 53943

Docker command can't connect to Docker daemon

I want to make a move to Docker, so I've just started to mess around with it. I've installed Docker on a VirtualBox Ubuntu 15.10 (Wily Werewolf) installation and as suggested here I then tried running a basic nginx Docker image:

$ docker run --name mynginx1 -P -d nginx
Cannot connect to the Docker daemon. Is the docker daemon running on this host?

So I checked out whether Docker was running:

$ sudo service docker status
● docker.service - Docker Application Container Engine
   Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
   Active: active (running) since vr 2015-11-06 08:41:48 CET; 15min ago
     Docs: https://docs.docker.com
 Main PID: 7542 (docker)
   CGroup: /system.slice/docker.service
           └─7542 /usr/bin/docker daemon -H fd://

nov 06 08:41:47 kramer65-VirtualBox systemd[1]: Starting Docker Application Container Engine...
nov 06 08:41:47 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:47.900410966+01:00" level=info msg="API ...ock"
nov 06 08:41:48 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:48.033514149+01:00" level=info msg="Fire...lse"
nov 06 08:41:48 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:48.141594321+01:00" level=info msg="Defa...ess"
nov 06 08:41:48 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:48.416294436+01:00" level=warning msg="Y...it."
nov 06 08:41:48 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:48.565507576+01:00" level=info msg="Load...rt."
nov 06 08:41:48 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:48.567907022+01:00" level=info msg="Load...ne."
nov 06 08:41:48 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:48.567945214+01:00" level=info msg="Daem...ion"
nov 06 08:41:48 kramer65-VirtualBox docker[7542]: time="2015-11-06T08:41:48.567969891+01:00" level=info msg="Dock....9.0
nov 06 08:41:48 kramer65-VirtualBox systemd[1]: Started Docker Application Container Engine.
Hint: Some lines were ellipsized, use -l to show in full.

This suggests that the Docker daemon is actually already running, but to be sure I just started the Docker daemon manually:

$ sudo docker daemon
INFO[0000] API listen on /var/run/docker.sock           
INFO[0000] [graphdriver] using prior storage driver "aufs" 
INFO[0000] Firewalld running: false                     
INFO[0000] Default bridge (docker0) is assigned with an IP address XXX.XX.X.X/XX. Daemon option --bip can be used to set a preferred IP address 
WARN[0000] Your kernel does not support swap memory limit. 
INFO[0000] Loading containers: start.                   

INFO[0000] Loading containers: done.                    
INFO[0000] Daemon has completed initialization          
INFO[0000] Docker daemon                                 commit=76d6bc9 execdriver=native-0.2 graphdriver=aufs version=1.9.0

I then tried running the image again, but with the same result:

$ docker run --name mynginx1 -P -d nginx
Cannot connect to the Docker daemon. Is the docker daemon running on this host?

I tried sudo'ing the command, but to no avail. What am I doing wrong here?

Upvotes: 266

Views: 302252

Answers (26)

Grey Vugrin
Grey Vugrin

Reputation: 658

In my case, docker was installed via snap. Needed to run sudo snap start docker to get it back up!

Upvotes: 1

Managarm
Managarm

Reputation: 1121

For me, none of the above fixes worked; i.e. my user was in the docker group, the service was running, etc. In the end I had a borked configuration it seems:

rm -rf ~/.docker

After that everything worked!

Upvotes: 3

Raghav
Raghav

Reputation: 9630

I was able to fix that by running the following command:

sudo mv /var/lib/dpkg/info/docker-ce* /tmp

Upvotes: 1

Zubair Alam
Zubair Alam

Reputation: 8947

You need to add your current user to the docker group as follows:

sudo usermod -aG docker $(whoami)

then logout & login again into the system or restart the system. test by docker version

for further info how to install docker-engine follow docker documentation

Upvotes: 462

Thiago Falcao
Thiago Falcao

Reputation: 5023

Tested in Ubuntu 16.04

# Create the docker group and add your user to the docker group
groupadd docker
usermod -aG docker $USER
newgrp docker

# Configure docker service to be exposed
mkdir -p /etc/systemd/system/docker.service.d
echo -e '[Service]\nExecStart=\nExecStart=/usr/bin/dockerd -H fd:// -H tcp://0.0.0.0:2376' >> /etc/systemd/system/docker.service.d/override.conf

# restart service
systemctl daemon-reload
service docker restart

Upvotes: 3

mopsyd
mopsyd

Reputation: 1922

Perhaps this will help someone, as the error message is extremely unhelpful, and I had gone through all of the standard permission steps numerous times to no avail.

Docker occasionally leaves ghost environment variables in place that block access, despite your system otherwise being correctly set up. The following shell commands may make it accessible again, if you have had it running at one point and it just stopped cooperating after a reboot:

unset DOCKER_HOST
unset DOCKER_TLS_VERIFY
unset DOCKER_TLS_PATH
docker ps

I had a previously working docker install, and after rebooting my laptop it simply refused to work. Was correctly added to the docker user group, had the correct permissions on the socket, etc, but could still not run docker login, docker run ..., etc. This fixed it for me. Unfortunately I have to run this on each reboot. This is mentioned on a couple of github issues also as a workaround, although it seems like a bug that this is a persistent barrier to correct operation of Docker (note: I am on Arch Linux, not OSX, but this was the same issue for me).

Upvotes: 1

AmrMohallel
AmrMohallel

Reputation: 136

I had the same problem. Been struggling for two days to solve it.

It only worked when I did:

  1. According to Docker's Tutorial, you need to add the Docker key if not already added using:

    $ sudo wget -qO- https://get.docker.com/gpg | sudo apt-key add -

  2. Then make sure you grant docker privileges to yourself using:

    $ sudo usermod -aG docker $USER

Hope this helps you too.

Upvotes: 8

Eduardo Marín Izquierdo
Eduardo Marín Izquierdo

Reputation: 59

Giving non-root access - from docker

Add the docker group if it doesn't already exist.

$ sudo groupadd docker

Add the connected user "${USER}" to the docker group.

Change the user name to match your preferred user.

You may have to logout and log back in again for this to take effect.

$ sudo gpasswd -a ${USER} docker

Restart the Docker daemon.

$ sudo service docker restart

Upvotes: 5

kevthanewversi
kevthanewversi

Reputation: 3756

Had the same issue and what worked for me was:
Checking the ownership of /var/run/docker.sock 

ls -l /var/run/docker.sock

If you're not the owner then change ownership with the command

sudo chown *your-username* /var/run/docker.sock

Then you can go ahead and try executing the docker commands hassle-free :D

Upvotes: 13

user6646280
user6646280

Reputation: 21

For Ubuntu 16.04

Inside file /lib/systemd/system/docker.service change:

ExecStart=/usr/bin/dockerd fd://

with:

ExecStart=/usr/bin/dockerd -H tcp://0.0.0.0:2375

Inside file /etc/init.d/docker change:

DOCKER_OPTS=

with:

DOCKER_OPTS="-H tcp://0.0.0.0:2375"

and then restart your computer.

Upvotes: 1

BALAJI POTHULA
BALAJI POTHULA

Reputation: 51

Add current user to docker group:

sudo usermod -aG docker $(whoami)

Upvotes: 0

Nilesh Kande
Nilesh Kande

Reputation: 41

  1. I also had the same issue. The problem was in sockets allocated to docker-daemon and docker-client.
  2. First, permission was not set for the docker-client on docker.sock You can set it using "sudo usermod -aG docker $USER"
  3. Then check your bash file where the docker-client is running, For me it was on 0.0.0.0:2375, while docker-daemon was running on unix socket.(It was set in the configuration file of dockerd).
  4. Just comment the bash-line and it'll work fine.
  5. But if you want to make it work on TCP port instead of unix socket, change the configuration file of dockerd and set it on 0.0.0.0.2375 and keep the line in bash as it is if present or set it to 0.0.0.0:2375.

Upvotes: 2

raja
raja

Reputation: 51

As docker binds to a unix socket which is owned by root while starting up, using 'sudo' along with the docker commands will work.

Upvotes: 1

lordzuko
lordzuko

Reputation: 763

For Ubuntu:
Happened with me when I updated docker.
You need to unmask the service and socket and then restart the service.

Following worked for me:

systemctl unmask docker.service
systemctl unmask docker.socket
systemctl start docker.service

What happend behind the scenes
systemd also has the ability to mark a unit as completely unstartable, automatically or manually, by linking it to /dev/null. This is called masking the unit, and is possible with the mask command.

sudo systemctl mask docker.service

You can check the list of masked services using:

sudo systemctl list-unit-files

Output of sudo systemctl list-unit-files

To enable auto/manual start of service you need to unmask it using:

sudo sytemctl unmask docker.service

Now the service will be enabled as shown below enter image description here

Upvotes: 2

Dadaso Zanzane
Dadaso Zanzane

Reputation: 6259

I have same issue while running docker.

you can run commands as sudo user:

sudo docker ***your command here***

Upvotes: 2

Mr.Moe
Mr.Moe

Reputation: 507

For the ones who already tried restarting your machine, unsetting the environment variable DOCKER_HOST as told in the docker env documentation and all the rest just try to go with the 

sudo service docker restart

Only this did the trick for me even after restarting the machine.

Upvotes: 5

deFreitas
deFreitas

Reputation: 4448

After install everything and start the service, try close your terminal and open it again, then try pull your image

Edit

I also had this issue again, if the solution above won't worked, try this solution that is the command bellow

sudo mv /var/lib/docker/network/files/ /tmp/dn-bak

Considerations

If command above works you probably are with network docker problems, anyway this resolves it, to confirm that, see the log with the command bellow

tail -5f /var/log/upstart/docker.log

If the output have something like that

FATA[0000] Error starting daemon: Error initializing network controller: could not delete the default bridge network: network bridge has active endpoints 
/var/run/docker.sock is up

You really are with network problems, however I do not know yet if the next time you restart(update, 2 months no issue again) your OS will get this problem again and if it is a bug or installation problem

My docker version

Client:
 Version:      1.9.1
 API version:  1.21
 Go version:   go1.4.2
 Git commit:   a34a1d5
 Built:        Fri Nov 20 13:12:04 UTC 2015
 OS/Arch:      linux/amd64

Server:
 Version:      1.9.1
 API version:  1.21
 Go version:   go1.4.2
 Git commit:   a34a1d5
 Built:        Fri Nov 20 13:12:04 UTC 2015
 OS/Arch:      linux/amd64

Upvotes: 10

Danny
Danny

Reputation: 4124

For OSX:

After opening docker and starting the 'default' machine via the Quickstart Terminal (https://docs.docker.com/engine/installation/mac/), you try docker commands and get this "can't connect to docker daemon" message, it turns out you need some env variables set:

eval "$(docker-machine env default)"

Then try it out with docker run hello-world to see if everything is peachy.

Upvotes: 5

user3737461
user3737461

Reputation: 47

Try to use "sudo" with the command you are running.

Upvotes: 2

Sumit Bhoyar
Sumit Bhoyar

Reputation: 9

I have faced same error on Amazon EC2 instance. The issue got fixed after restarting the instance.

Upvotes: 0

Ronald Weidner
Ronald Weidner

Reputation: 690

This question is currently number 3 on a Google search. After doing some research into solving this problem on my Linux system I thought I would write this answer. The original post states the problem is on Ubuntu but I also experienced the issue using Fedora. With that in mind, here is what I did to fix the problem.

On Fedora 22

Installing Docker:

$> curl -fsSL https://get.docker.com/ | sh

After installing Docker:

A user needs to be added to the docker group.

$> sudo usermod -aG docker

The docker daemon needs to be started

$> sudo service docker start

You can set the daemon to start at boot

$> sudo chkconfig docker on

You can verify the docker service is running

$> service docker status

And one last final check

$> docker run hello-world

Upvotes: 3

Jun
Jun

Reputation: 2369

Add the user to the docker group

  • Add the docker group if it doesn't already exist:

    sudo groupadd docker

  • Add the connected user "${USER}" to the docker group:

    sudo gpasswd -a ${USER} docker

  • Restart the Docker daemon:

    sudo service docker restart

  • Either do a newgrp docker or log out/in to activate the changes to groups.

Upvotes: 140

Dimitris Fasarakis Hilliard
Dimitris Fasarakis Hilliard

Reputation: 160607

Usually, the following command does the trick:

sudo service docker restart

This, instead of docker start for the cases where Docker seems to already be running.

If that works then, as suggested and in another answer and on this GitHub issue, if you haven't added yourself in the docker group do it by running:

sudo usermod -aG docker <your-username>

And you're most likely good to go.

As for anybody else bumping into this, in some OS's docker doesn't start right after you install it and, as a result, the same can't connect to daemon message appears. In this case you can first verify that Docker is indeed not running by checking the status of your docker service by executing:

sudo service docker status

If the output looks something like: docker stop/waiting instead of docker start/running, process 15378 then it obviously means Docker is not active. In this case make sure you start it with:

sudo service docker start

And, as before, you'll most likely be good to go.

Upvotes: 38

MartyIX
MartyIX

Reputation: 28666

note to self: I get the error from the question's title when I forget to run docker command with sudo:

sudo docker run ...

[Ubuntu 15.10]

Upvotes: 18

Daniel Loureiro
Daniel Loureiro

Reputation: 5383

enter as root (sudo su) and try this:

unset DOCKER_HOST
docker run --name mynginx1 -P -d nginx

I've the same problem here, and the docker command only worked running as root, and also with this DOCKER_HOST empty

PS: also beware that the correct and official way to install on Ubuntu is to use their apt repositories (even on 15.10), not with that "wget" thing.

Upvotes: 6

yushulx
yushulx

Reputation: 12160

After installing docker on Ubuntu, I ran the following command:

sudo service docker start

Have you tried it?

Upvotes: 13

Related Questions