CODEWITHSUNDEEP
.netwindowstimestamp
TJF
TJF

Reputation: 2258

Timestamping data through multiple machines - times are off?

I working on some applications that route tcp and upd traffic through multiple machines and I'm trying to timestamp (millisecond resolution) the packets on every node to receive a full picture of latency through each node.

Before the tests I made sure that all windows machines are NTP synced, however my issue seems to be that the time on all machines is never really fully in sync and system times seem to vary +-500ms. For example, sometimes my timestamp logs show that a packet was received at node2 500ms before it was sent from node1.

After a NTP resync of all machines it will always show a different latency between node1 and node2 but the time differences are always constant until the next NTP sync.

What accuracy can I expect when syncing multiple machines to the same NTP server? Is there any reason why I'm seeing these discrepancies and how do other applications measure latency through a system that involves multiple machines?

Thanks,

Tom

Upvotes: 3

Views: 446

Answers (2)

Peladao
Peladao

Reputation: 4090

Measure the latency between node1 and node2 by sending two-way messages. First send something from node1 to node2 and let node2 return something immediately to node1. On node1 you can now easily measure the total time elapsed for sending a message to node2 and back without having to worry about syncing times on different computers.

Upvotes: 0

leppie
leppie

Reputation: 117220

Unless you run a NTP server on the local LAN, chances are that it could be off by as much as a few seconds due to network latency.

I think it would be quite hard to get millisecond synchronization without using hardware triggers.

Edit:

A better idea would be for all the nodes to synchronize times with each other. That way you can continually calibrate it.

Edit 2:

Also note that not all things equal are equal. There could be variations between 2 systems' timing clocks whether it is the CPU clock or the RTC, due to any number of factors eg temperature and age of the oscillators, oh and of course the lack of a realtime OS ;P

Upvotes: 1

Related Questions