CODEWITHSUNDEEP
command-lineinno-setupcommand-line-arguments
Similar
Similar

Reputation: 417

Is it possible to accept custom command line parameters with Inno Setup

I am preparing an installer with Inno Setup. But I'd like to add an additional custom (none of the available parameters) command line parameters and would like to get the value of the parameter, like:

setup.exe /do something

Check if /do is given, then get the value of something. Is it possible? How can I do this?

Upvotes: 41

Views: 44751

Answers (10)

Mark Berry
Mark Berry

Reputation: 19032

Further to @DanLocks' answer, the {param:*ParamName|DefaultValue*} constant is documented near the bottom of the Constants page:

http://www.jrsoftware.org/ishelp/index.php?topic=consts

I found it quite handy for optionally suppressing the license page. Here is all I needed to add (using Inno Setup 5.5.6(a)):

[code]
{ If there is a command-line parameter "skiplicense=true", don't display license page }
function ShouldSkipPage(PageID: Integer): Boolean;
begin
  Result := False
  if PageId = wpLicense then
    if ExpandConstant('{param:skiplicense|false}') = 'true' then
      Result := True;
end;

Upvotes: 19

Dan Locks
Dan Locks

Reputation: 611

With InnoSetup 5.5.5 (and perhaps other versions), just pass whatever you want as a parameter, prefixed by a /

c:\> myAppInstaller.exe /foo=wiggle

and in your myApp.iss:

[Setup]
AppName = {param:foo|waggle}

The |waggle provides a default value if no parameter matches. Inno setup is not case sensitive. This is a particularly nice way to handle command line options: They just spring into existence. I wish there was as slick a way to let users know what command line parameters the installer cares about.

BTW, this makes both @knguyen's and @steve-dunn's answers somewhat redundant. The utility functions do exactly what the built-in {param: } syntax does.

Upvotes: 45

Martin Prikryl
Martin Prikryl

Reputation: 202088

Inno Setup directly supports switches with syntax /Name=Value using {param} constant.

You can use the constant directly in sections, though this use is quite limited.

An example:

[Registry]
Root: HKCU; Subkey: "Software\My Company\My Program\Settings"; ValueType: string; \
    ValueName: "Mode"; ValueData: "{param:Mode|DefaultMode}"

You will more likely want to use switches in Pascal Script.

If your switch has the syntax /Name=Value, the easiest way to read its value is using ExpandConstant function.

For example:

if ExpandConstant('{param:Mode|DefaultMode}') = 'DefaultMode' then
begin
  Log('Installing for default mode');
end
  else
begin
  Log('Installing for different mode');
end;

If you want to use a switch value to toggle entries in sections, you can use Check parameter and a auxiliary function, like:

[Files]
Source: "Client.exe"; DestDir: "{app}"; Check: SwitchHasValue('Mode', 'Client')
Source: "Server.exe"; DestDir: "{app}"; Check: SwitchHasValue('Mode', 'Server')

[Code]

function SwitchHasValue(Name: string; Value: string): Boolean;
begin
  Result := CompareText(ExpandConstant('{param:' + Name + '}'), Value) = 0;
end;

Ironically it is more difficult to check for a mere presence of switch (without a value).

Use can use a function CmdLineParamExists from @TLama's answer to Passing conditional parameter in Inno Setup.

function CmdLineParamExists(const Value: string): Boolean;
var
  I: Integer;  
begin
  Result := False;
  for I := 1 to ParamCount do
    if CompareText(ParamStr(I), Value) = 0 then
    begin
      Result := True;
      Exit;
    end;
end;

You can obviously use the function in Pascal Script:

if CmdLineParamExists('/DefaultMode') then
begin
  Log('Installing for default mode');
end
  else
begin
  Log('Installing for different mode');
end;

But you can even use it in sections, most typically using Check parameter:

[Files]
Source: "MyProg.hlp"; DestDir: "{app}"; Check: CmdLineParamExists('/InstallHelp')

A related problem:
Add user defined command line parameters to /? window

Upvotes: 22

Irina Leo
Irina Leo

Reputation: 79

I've modified a little bit knguyen's answer. Now it's case insensitive (you can write en console /myParam or /MYPARAM) and it can accept default value. Also I fixed the case when you receive larger parameter then expected (for ex: /myParamOther="parameterValue" in place of /myParam="parameterValue". Now myParamOther doesn't match). 

function GetCommandlineParam(inParamName: String; defaultParam: String): String; 
var
   paramNameAndValue: String;
   i: Integer;
begin
   Result := defaultParam;

   for i := 0 to ParamCount do
   begin
     paramNameAndValue := ParamStr(i);
     if  (Pos(Lowercase(inParamName)+'=', AnsiLowercase(paramNameAndValue)) = 1) then
     begin
       Result := Copy(paramNameAndValue, Length(inParamName)+2, Length(paramNameAndValue)-Length(inParamName));
       break;
     end;
   end;
end;

Upvotes: 0

knguyen
knguyen

Reputation: 529

This is the function I wrote, which is an improvement of Steven Dunn's answer. You can use it as:

c:\MyInstallDirectory>MyInnoSetup.exe /myParam="parameterValue"

myVariable := GetCommandLineParam('/myParam');

{ util method, equivalent to C# string.StartsWith }
function StartsWith(SubStr, S: String): Boolean;
begin
  Result:= Pos(SubStr, S) = 1;
end;

{ util method, equivalent to C# string.Replace }
function StringReplace(S, oldSubString, newSubString: String): String;
var
  stringCopy: String;
begin
  stringCopy := S; { Prevent modification to the original string }
  StringChange(stringCopy, oldSubString, newSubString);
  Result := stringCopy;
end;

{ ================================================================== }
function GetCommandlineParam(inParamName: String): String; 
var
   paramNameAndValue: String;
   i: Integer;
begin
   Result := '';

   for i := 0 to ParamCount do
   begin
     paramNameAndValue := ParamStr(i);
     if (StartsWith(inParamName, paramNameAndValue)) then
     begin
       Result := StringReplace(paramNameAndValue, inParamName + '=', '');
       break;
     end;
   end;
end;

Upvotes: 9

Steven Dunn
Steven Dunn

Reputation: 205

If you want to parse command line arguments from code in inno, then use a method similar to this. Just call the inno script from the command line as follows:

c:\MyInstallDirectory>MyInnoSetup.exe -myParam parameterValue

Then you can call the GetCommandLineParam like this wherever you need it:

myVariable := GetCommandLineParam('-myParam');

{ ================================================================== }
{ Allows for standard command line parsing assuming a key/value organization }
function GetCommandlineParam (inParam: String):String;
var
  LoopVar : Integer;
  BreakLoop : Boolean;
begin
  { Init the variable to known values }
  LoopVar :=0;
  Result := '';
  BreakLoop := False;

  { Loop through the passed in arry to find the parameter }
  while ( (LoopVar < ParamCount) and
          (not BreakLoop) ) do
  begin
    { Determine if the looked for parameter is the next value }
    if ( (ParamStr(LoopVar) = inParam) and
         ( (LoopVar+1) <= ParamCount )) then
    begin
      { Set the return result equal to the next command line parameter }
      Result := ParamStr(LoopVar+1);

      { Break the loop }
      BreakLoop := True;
    end;

    { Increment the loop variable }
    LoopVar := LoopVar + 1;
  end;
end;

Upvotes: 9

Sloth
Sloth

Reputation: 1

In response to:

"With InnoSetup 5.5.5 (and perhaps other versions), just pass whatever you want as a parameter, prefixed by a /" "@NickG, yes, every constant you can expand by the ExpandConstant function"

  • This is not the case. Trying to use a command line parameter in ExpandConstant in InnoSetup 5.5.6 results in a runtime error.

PS: I would have added a comment directly but apparently I dont have enough "reputation"

Upvotes: 0

Bernard
Bernard

Reputation: 7961

You can pass parameters to your installer scripts. Install the Inno Setup Preprocessor and read the documentation on passing custom command-line parameters.

Upvotes: 0

Otherside
Otherside

Reputation: 2855

Yes it is possible, you can use the ParamStr function in PascalScript to access all the commandline parameters. The ParamCount function will give you the number of commandline parameters.

Another possibility is to use GetCmdTail

Upvotes: 7

Similar
Similar

Reputation: 417

I found the answer: GetCmdTail.

Upvotes: -1

Related Questions