CODEWITHSUNDEEP
eclipsebuildcompilation
yokks
yokks

Reputation: 5773

The project cannot be built until the build path errors are resolved.

While compiling an android project in eclipse 3.4.2, I am getting The project cannot be built until the build path errors are resolved.

I got a temporary solution from the blog http://www.scottdstrader.com/blog/ether_archives/000921.html

The resolution was to force a resave of the selected projects (and their .classpath files):

  1. Open the project properties
  2. Select Java Build Path > Libraries
  3. Add a new, arbitrary library (to be deleted later) > OK
  4. Wait for the workspace to refresh (or force a refresh of the project)
  5. The error(s) will go away
  6. Remove the dummy library

The only other references I could find were to make minor alterations of contents of the .classpath file.

Is there any permanent fix for this issue?

Upvotes: 123

Views: 397934

Answers (20)

aimhaj
aimhaj

Reputation: 1655

This works for me: close the project then re-open it, this will force eclipse to reload a fresh project and detects the correct build path.

Upvotes: 9

appdesigns
appdesigns

Reputation: 134

Added below to pom.xml file and it worked eventually: 

<dependency>
    <groupId>javax.servlet</groupId>
    <artifactId>javax.servlet-api</artifactId>
    <version>4.0.0</version>
    <scope>provided</scope>
</dependency>

Upvotes: 0

saurabh gupta
saurabh gupta

Reputation: 521

Go to > Right CLick on your project folder > Build Path > Configure Build Path > Libraries Tab > remove project and external dependencies > apply & close

Now, Gradle refresh your project.

Upvotes: 0

Kinjal Dixit
Kinjal Dixit

Reputation: 7935

I was getting an additional warning

The compiler compliance specified is 1.6 but a JRE 1.8 is used

Resolving this warning make the error also go away. The steps are as follows:

I right-clicked on it, then clicked on Quick Fix. From the dialog that opened I selected Open the Compiler Compliance property page, and clicked the Finish button.

(This is same as Java Compiler section.)

In this dialog I found the Compiler compliance level drop down and changed 1.6 to 1.8, and clicked on Apply and close.

I got a message box Compiler Settings Changed which asked if I wanted to Build the project now?. I clicked on Yes.

The build path error went away.

Upvotes: 0

knsaicharan
knsaicharan

Reputation: 115

I've faced this issue a couple of times and following the below steps has resolved both the times. 1. Navigate to C:\Users\ 2. locate the ".m2" folder and delete it.

  1. Now navigate to the particular project in eclipse and Right-click on the project > Maven > Update Project

wait until the project is updated and in my case following the above steps resolved both the times.

Upvotes: 0

DGK
DGK

Reputation: 3005

If you think you've done everything correctly but Eclipse still complains about the jars, refresh the folder where the jars are and make sure eclipse knows they've been added to the project. Specifying the file path alone is (apparently) not enough

Upvotes: 0

chamzz.dot
chamzz.dot

Reputation: 775

get a cmd and run

mvn eclipse:eclipse

Upvotes: 4

Vikram3891
Vikram3891

Reputation: 743

This is what worked for me:

  1. Go to ~/.m2/repository and deleted everything there by running rm -rf. Make sure everything is deleted.
  2. Re-launch eclipse or STS
  3. Right click on project -> Maven -> update project.

Upvotes: 3

cayhorstmann
cayhorstmann

Reputation: 3361

I ran into this annoying issue with the Play framework. It would be nice if there was some way of knowing what build errors Eclipse is unhappy about, but it's not going to tell you. With one project, I was able to close the project, rebuild the Eclipse configuration with sbt eclipse, and reopen. With an almost identical project, that didn't work. But deleting the project, rebuilding the Eclipse configuration with sbt eclipse, and importing, did the trick.

Upvotes: 0

BustedSanta
BustedSanta

Reputation: 1388

This what fixed it for me...

I was having an issue with my spring-core.jar. I deleted the entire release directory located here. (I'm on win 10).

C:\Users********.m2\repository\org\springframework\spring-core\4.3.1.RELEASE

I right clicked on the project > Maven > Update project and my exclamation mark disappeared. No problems any more.

Here is the source where I found the information:

http://crunchify.com/cannot-be-read-or-is-not-a-valid-zip-file-how-to-fix-maven-build-path-error-with-corrupted-jar-file/

Upvotes: 11

Kevin Workman
Kevin Workman

Reputation: 42176

None of the other answers worked for me. Even after fixing my build path issues, doing a refresh, clean, rebuild, and restart (of both eclipse and the computer), I was still getting the little red exclamation point.

I fixed it by closing the project (right-click, close project) and reopening it (double-click the closed project), which seemed to force eclipse to "notice" that the build path problems had been corrected.

Upvotes: 6

HimalayanCoder
HimalayanCoder

Reputation: 9850

Goto to Project=>Build Automatically . Make sure it is ticked

Upvotes: -1

DamongoCoder
DamongoCoder

Reputation: 431

On my Mac this is what worked for me

  1. Project > Clean (errors and warnings will remain or increase after this)
  2. Close Eclipse
  3. Reopen Eclipse (errors show momentarily and then disappear, warnings remain)

You are good to go and can now run your project

Upvotes: 2

jimbob
jimbob

Reputation: 3298

In Eclipse this worked for me: right click project. -> Properties -> Library Section; Add (any library at all) -> select library and click remove -> press okay.

Upvotes: 0

user3133845
user3133845

Reputation: 23

just check if any unnecessary Jars are added in your library or not. if yes, then simply remove that jars from your library and clean your project once. Its worked for me.

Upvotes: 0

user2318214
user2318214

Reputation: 681

1-Right CLick on your project folder, Choose Build Path > Configure Build Path
2-Select Libraries Tab and delete any arbitrary library present there.
3-Click on Add Library option, Select JRE System Library and click Next.
4-Choose last Radiobutton option Workspace default JRE and click Finish.
5-press f5 for refresh.
6-run ur program .

Upvotes: 68

NightFury
NightFury

Reputation: 13546

For my mac osx Eclipse, I followed following steps:

  1. Right CLick on your project, Choose Build Path > Configure Build Path
  2. Select Libraries Tab and delete any arbitrary library or anything else causing errors in Build Path.
  3. Click on Add Library button, Select JRE System Library and click Next.
  4. Choose last Radiobutton option Workspace default JRE and click Finish.
  5. Clean and build your project.

Upvotes: 4

ThE uSeFuL
ThE uSeFuL

Reputation: 1534

This happens when libraries added to the project doesn't have the correct path.

  1. Right click on your project (from package explorer)
  2. Got build path -> configure build path
  3. Select the libraries tab
  4. Fix the path error (give the correct path) by editing jars or classes at fault

Upvotes: 11

Daniel Winterstein
Daniel Winterstein

Reputation: 2546

I've seen this problem a few times (got it again right now on my home computer with Eclipse 4.2).

Forcing a resave (by changing the classpath e.g. by adding a library, save, change-back) works temporarily. But the problem comes back when Eclipse is restarted :(

Nuking the Eclipse workspace from orbit will permanently fix it (until next time). But there must be a better way!

Upvotes: 1

TK Gospodinov
TK Gospodinov

Reputation: 8442

Have you tried using Project > Clean... from the menu? This will force a new build on the selected projects in Eclipse.

Upvotes: 146

Related Questions