CODEWITHSUNDEEP
pythonmacospython-2.7importmodule
J0ANMM
J0ANMM

Reputation: 8531

Modules are installed using pip on OSX but not found when importing

I successfully install different modules using pip and they are shown in the 

pip list

such as:

beautifulsoup4 (4.4.1)
requests (2.10.0)
Scrapy (1.1.0)

From Terminal

However, whenever I try to import it

import beautifulsoup4 / import bs4 or import Scrapy or import requests

the following error is shown:

$ python
Python 2.7.5 (default, Mar  9 2014, 22:15:05) 
[GCC 4.2.1 Compatible Apple LLVM 5.0 (clang-500.0.68)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import requests
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ImportError: No module named requests

Update: if I launch python when I am at the correct site-packages directory

$ pwd
/usr/local/lib/python2.7/site-packages
$ python
Python 2.7.5 (default, Mar  9 2014, 22:15:05)
>>> import requests
>>> import bs4
>>> import scrapy

Then it works. This would solve the issue if writing directly on the Terminal. However, I have no clue about how to make it work inside a file.py, which will be the normal use.

As far as I know, I only have Python2.7 installed.

From file.py

If I have a file.py saved in some local folder. This contains, for instance

import requests
from bs4 import BeautifulSoup

when I try

python file.py

I get the same error.

Approach

Same happens with any other module from the list. I would think pip is installing them in a directory that Python is not reading, but as per what I read, it is the correct one.

They are all installed here:

/usr/local/lib/python2.7/site-packages

Output requested by Padraic Cunningham:

$ which -a pip
/usr/local/bin/pip
$ which -a python
/usr/bin/python
/usr/local/bin/python

Output requested by leovp:

$ pip -V
pip 8.1.2 from /usr/local/lib/python2.7/site-packages (python 2.7)

Threads already checked

I have checked the following threads, but unfortunately they did not help me to solve the issue:

Any ideas of what the problem is?

Upvotes: 37

Views: 85113

Answers (9)

dc-code-for-fun
dc-code-for-fun

Reputation: 11

For some specific cases such as crypto module in python, after I install it in Pycharm, I will have to locate to the "crypto" module path and then change the directory name to "Crypto".

Upvotes: 0

flappix
flappix

Reputation: 2217

For me the problem was that pip3.11installs new modules to /usr/local/lib/python3.11(or whatever your python version is) which is not a path the python binary considers when looking for modules.

As a workaround you can specify the modules path in the variable PYTHONPATH like

PYTHONPATH="/usr/local/lib/python3.11/site-packages/" python3.11 my_script.py

Alternatively one can specify a directory where pip should new modules to with the -toption.

# print module paths which are considered by python
python3.11
Python 3.11.3 (main, Apr  8 2023, 04:18:45) [Clang 14.0.0 (clang-1400.0.29.102)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import sys
>>> sys.path
['', '/opt/local/Library/Frameworks/Python.framework/Versions/3.11/lib/python311.zip', '/opt/local/Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11', '/opt/local/Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11/lib-dynload', '/opt/local/Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11/site-packages']

# install new module to one of the above listed directories
pip3.11 install my_module -t /opt/local/Library/Frameworks/Python.framework/Versions/3.11/lib/python3.11/site-packages

Upvotes: 0

Prince Mredlana
Prince Mredlana

Reputation: 1

In my case I changed the VSCode interpreter to ~/opt/anaconda3/bin/python. This fixed the issue.

Upvotes: 0

J0ANMM
J0ANMM

Reputation: 8531

Here the answer that worked, which is basically what has been explained in the comments of the question. However, I thought it would be useful to have it explained as a clear and well structured answer.

As highlighted, the problem was that I was not using the interpreter that pip was installing for. The command which shows where pip was installing the modules:

$ which -a pip
/usr/local/bin/pip

and where the different python versions were located:

$ which -a python
/usr/bin/python
/usr/local/bin/python

That is, my system/default python was

/usr/bin/python

while pip was installing for

/usr/local/bin/python

Therefore, I could not import anything I installed when I just typed python, because the /usr/bin/python interpreter was the one started.

Solution

Install pip again specifying the destination of the modules that will be installed. This must be the destination for the system/default python.

This has been done in two steps:

  1. Downloding get-pip.py from bootstrap.pypa.io/get-pip.py. (You may need to use the deprecated one for Python 2: bootstrap.pypa.io/2.7/get-pip.py)

  2. Installing it with the following command

    sudo /usr/bin/python get-pip.py

Note that without the sudo I got an error and was not able to install pip.

Upvotes: 26

user12334347
user12334347

Reputation: 41

I was able to fix this problem by running:

$ brew doctor

and got the following:

Consider setting your PATH so that /usr/local/bin occurs before /usr/bin.

Here is a one-liner:

echo 'export PATH="/usr/local/bin:$PATH"' >> ~/.bash_profile

Once I ran the one-liner, I was able to access the installed package from /usr/local/bin

Upvotes: 4

Eric Wiener
Eric Wiener

Reputation: 5967

I'm adding this in case it helps anyone else out. For me the issue was I was running Anaconda and pip3 was installing to a different directory than Anaconda was linked with. To fix this run conda deactivate. You can reactivate later with conda activate

Upvotes: 2

user73772
user73772

Reputation: 87

Run brew doctorin the terminal it should give you a warning that says: 

Warning: The following directories do not exist:
/usr/local/sbin

You should create these directories and change their ownership to your account.
  sudo mkdir -p /usr/local/sbin
  sudo chown -R $(whoami) /usr/local/sbin

type sudo mkdir -p /usr/local/sbin in the terminal and hit enter then type sudo chown -R $(whoami) /usr/local/sbin then run python and try importing your module again.

Upvotes: 0

Raymond
Raymond

Reputation: 476

I have just fixed a similar issue.

To give some background, I install pip with homebrew by executing brew install python. One drawback by executing this command, it will install both python2 and python3(maybe not a disadvantage in some case), then

pip install scrapy

but when I try to import scrapy, it complained ImportError: No module named scrapy.

My Solution: run brew doctor, it should report you a link is broken, it asks you to run brew link python, you might encounter some errors, but follow the prompt suggestion to move forward, after successfully executing brew link python, everything should work now.

Upvotes: 18

Ani Menon
Ani Menon

Reputation: 28219

Since your problem maybe caused due to various reason, I have listed down a few of them here :

The link you were looking for : https://pythonhosted.org/setuptools/setuptools.html#development-mode

  • It may also happen if you have two versions of python installed. If the pip that you are accessing is of one version & the python interpreter used is another.

So just see to that you are using the same version of python to install and use the package.

You may fix this using alias,

First, set up a shell alias:

alias python=/usr/local/bin/python3

Then, type that at a prompt, or put it in your ~/.bashrc so that whenever you open python from the terminal the correct version opens.

  • If both of the above methods don't work for you then check this :

ImportError No module named or this

Upvotes: 10

Related Questions