CODEWITHSUNDEEP
gitsshgithubssh-keys
Q_Mlilo
Q_Mlilo

Reputation: 1797

How to generate ssh keys (for github)

Question: How do I generate ssh private and public keys (to be used in GitHub/GitLab) using command line.

The command below generates the error

sh.exe": syntax error near unexpected token '('

I am using Windows XP.

$ ssh-keygen -t rsa -C "[email protected]"
Generating public/private rsa key pair.
Enter file in which to save the key (/c/Users/xxxx/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /c/Users/xxxx/.ssh/id_rsa.
Your public key has been saved in /c/Users/xxxx/.ssh/id_rsa.pub.
The key fingerprint is:
01:0f:f4:3b:ca:85:d6:17:a1:7d:f0:68:9d:f0:a2:db [email protected]

Upvotes: 49

Views: 138398

Answers (6)

Majedul Islam
Majedul Islam

Reputation: 401

Just apply two commands :

ssh-keygen -t rsa -b 4096

cat ~/.ssh/id_rsa.pub

Copy ssh key and paste on browser

Go to home/.ssh folder. Click on config file and add these two line(if config file doesn't exist then create a file name as "config")

HostKeyAlgorithms ssh-rsa

PubkeyAcceptedKeyTypes ssh-rsa

Upvotes: 3

Akhil S
Akhil S

Reputation: 1181

Generate SSH key using below command

ssh-keygen -trsa -C [email protected]

just hit enter to apply the default value for all the inputs it asks

the output will be

Generating public/private rsa key pair.
Enter file in which to save the key (/home/user/.ssh/id_rsa): 
/home/user/.ssh/id_rsa already exists.
Overwrite (y/n)? y
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /home/user/.ssh/id_rsa
Your public key has been saved in /home/user/.ssh/id_rsa.pub
The key fingerprint is:
SHA256:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx [email protected]
The key's randomart image is:
+---[RSA xxxx]----+
| ..++xX*Ox        |
| x..xx/+.x. + .   |
|.. +..*+xx x +    |
|... +x+o x.       |
|x.. + +..x        |
|xx.. x            |
|...               |
|x x               |
|x  x.             |
+----[SHA256]------+

just use the cat command to log the ssh key file contents on the terminal(use your own path here).

cat /home/user/.ssh/id_rsa.pub

the output will be

ssh-rsa xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx [email protected]

copy the contents and go to your github account go to settings under Account settings>SSH and GPG keys click on New SSH key, provide the name you wish and paste the copied contents in the value and save. that's it you are ready to commit your changes without using username, password every time.

Upvotes: 4

Naved Khan
Naved Khan

Reputation: 1947

Step 1: Generate Your SSH Key

$ ssh-keygen -t rsa -b 4096 -C "[email protected]"

Step 2: Use the Key

$ eval $(ssh-agent -s)

Then add the key we just generated. If you selected a different path than the default, be sure to replace that path in the command.

ssh-add ~/.ssh/id_rsa

Step 3: Add the SSH Key on GitHub

clip < ~/.ssh/id_rsa.pub

if clip not found then add the next command

cat ~/.ssh/id_rsa.pub

Finally Result something like on your cmd

ssh-rsa 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 [email protected]

copy from your cmd and go to your GitHub account setting find ssh and gpg keys

Upvotes: 16

Hazarapet Tunanyan
Hazarapet Tunanyan

Reputation: 2865

Here is the command

ssh-keygen -t rsa -b 4096 -C "[your github's email]"
# Creates a new ssh key
# Generating public/private rsa key pair.

This will generate a key for you. You have to copy that and insert into your Github's account (just one time).

Steps how to do It

Upvotes: 18

Aviv
Aviv

Reputation: 14527

Solution: ssh-keygen -t rsa

Explanation : ssh-keygen is a tool for creating new authentication key pairs for SSH. Such key pairs are used for automating logins, single sign-on, and for authenticating hosts

(for example cloning project from your private repo on Github straight to your aws machine).

Options: You can perform more complicated operations and using flags in order to generate a tailor-made key according to your use case, extended functionality are more powerful and secured. The basic flags are: bits (Large integers making the the RSA key be less vulnerable and hard to crack), passphrase (similar to password) , type (dsa/ecdsa/ed25519/rsa) , comment for the specific ssh token (email or user name) and output key (default store on ~/.ssh/ path)

Synopsis: ssh-keygen [-q] [-b bits] [-t dsa | ecdsa | ed25519 | rsa] [-N new_passphrase] [-C comment] [-f output_keyfile]

Example:

ssh-keygen -b 4096 -t rsa -n "tHiSiaPasSWoRd" -c "[email protected]" -f ~/.ssh/id_rsa

Upvotes: 1

Residuum
Residuum

Reputation: 12064

The command to run is only 

ssh-keygen -t rsa -C "[email protected]"

All the rest beginning with line 2 of your script is the output of ssh-keygen.

And replace [email protected] with your email address.

Have a look at the manual for ssh-keygen to look for additional options. You should probably use a longer key by adding -b 4096 to the option list.

Upvotes: 64

Related Questions