Reputation: 539
I have Python 3.6.1 and PySerial installed. I am able to get a list of COM ports connected. I want to send data to the COM port and receive responses:
import serial.tools.list_ports as port_list
ports = list(port_list.comports())
for p in ports:
print (p)
Output:
COM7 - Prolific USB-to-Serial Comm Port (COM7)
COM1 - Communications Port (COM1)
From PySerial documentation:
>>> import serial
>>> ser = serial.Serial('/dev/ttyUSB0') # open serial port
>>> print(ser.name) # check which port was really used
>>> ser.write(b'hello') # write a string
>>> ser.close() # close port
I get an error from ser = serial.Serial('/dev/ttyUSB0')
because '/dev/ttyUSB0' makes no sense in Windows. What can I do in Windows?
Upvotes: 26
Views: 231731
Reputation: 322
On Windows, you need to install pyserial by running
pip install pyserial
then your code would be
import serial
import time
serialPort = serial.Serial(
port="COM4", baudrate=9600, bytesize=8, timeout=2, stopbits=serial.STOPBITS_ONE
)
serialString = "" # Used to hold data coming over UART
while 1:
# Read data out of the buffer until a carraige return / new line is found
serialString = serialPort.readline()
# Print the contents of the serial data
try:
print(serialString.decode("Ascii"))
except:
pass
to write data to the port use the following method
serialPort.write(b"Hi How are you \r\n")
note:b"" indicate that you are sending bytes
Upvotes: 15
Reputation: 753
This could be what you want. I'll have a look at the docs on writing. In windows use COM1 and COM2 etc without /dev/tty/ as that is for unix based systems. To read just use s.read() which waits for data, to write use s.write().
import serial
s = serial.Serial('COM7')
res = s.read()
print(res)
you may need to decode in to get integer values if thats whats being sent.
Upvotes: 19