Enable Windows 10 built-in hotspot by cmd/batch/powershell

Question

I'm searching for a way to enable/disable the Hotspot built into Windows 10 via the command prompt, powershell or a batch file. In the GUI, it can be easily done with the third button in the network panel (see image below), but I want to automate it.

I already found some hundred tutorials how to create a new hotspot using netsh, but as I understand it this would create another, different hotspot. Instead I want to use the already configured one. Or does Windows 10 use the same and creates a new hotspot every time but in between only remembers the settings?

---

I played around a little bit and discovered the following:

1. My current WiFi driver doesn't support hosted networks. If I enter netsh wlan show drivers it says hosted network supprt: no. So for the 'common' solution I would have to update the driver.
2. Nevertheless, I can create a HotSpot with the built-in solution (see image).
3. It seems that if I activate this HotSpot, Windows creates an additional Microsoft Wi-Fi Direct Virtual Adapter #x. As soon I deactivate the HotSpot, the adapter vanishes.

So it seems that MS is using a very different technique for the built-in hotspot than the netsh variant. Which brings me again to the question: how can I automate (by script) the enabling/disabling of this hotspot?

Answer 1

You can add a shortcut in “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp” to hotspot.bat so that wi-fi is set to on when the machine boots up. Or, run hotspot.bat on its own to toggle wi-fi between on and off.

hotspot.bat

REM no administrator privileges are needed
REM PowerShell -Command "Set-ExecutionPolicy Unrestricted"
PowerShell -file <where this file is>\\hotspot.ps1

hotspot.ps1

# from https://superuser.com/a/1434648
# altered to perform a simple toggle based on tether state
# which is a value of "On" or "Off" not 0 or 1
Add-Type -AssemblyName System.Runtime.WindowsRuntime
$asTaskGeneric = ([System.WindowsRuntimeSystemExtensions].GetMethods() | ? { $_.Name -eq 'AsTask' -and $_.GetParameters().Count -eq 1 -and $_.GetParameters()[0].ParameterType.Name -eq 'IAsyncOperation`1' })[0]


Function Await($WinRtTask, $ResultType)
{
    $asTask = $asTaskGeneric.MakeGenericMethod($ResultType)
    $netTask = $asTask.Invoke($null, @($WinRtTask))
    $netTask.Wait(-1) | Out-Null
    $netTask.Result
}

Function ToggleHotspot()
{
    $connectionProfile = [Windows.Networking.Connectivity.NetworkInformation,Windows.Networking.Connectivity,ContentType=WindowsRuntime]::GetInternetConnectionProfile()
    $tetheringManager = [Windows.Networking.NetworkOperators.NetworkOperatorTetheringManager,Windows.Networking.NetworkOperators,ContentType=WindowsRuntime]::CreateFromConnectionProfile($connectionProfile)

    $connectionProfile
    $tetheringManager

    if ($tetheringManager.TetheringOperationalState -eq "On")
    {
        "Stopping Hotspot"
        Await ($tetheringManager.StopTetheringAsync()) ([Windows.Networking.NetworkOperators.NetworkOperatorTetheringOperationResult])
    }
    else
    {
        "Starting Hotspot"
        Await ($tetheringManager.StartTetheringAsync()) ([Windows.Networking.NetworkOperators.NetworkOperatorTetheringOperationResult])
    }
}

ToggleHotspot

Answer 2

TL;DR:
If anyone is interested, I've created a batch file using the above solution to turn on the Mobile Hotspot. Simply create a new .bat file and paste the following code inside:

@echo off
powershell.exe -encodedCommand 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

(Although it's trivial to say, I'll remind you that the above code will also work as a CMD command).

Explanation:
What I did is to take the following PowerShell script (given in above answers by Julius Hardt), and convert it to a batch file using this converter:

[Windows.System.UserProfile.LockScreen,Windows.System.UserProfile,ContentType=WindowsRuntime] | Out-Null
Add-Type -AssemblyName System.Runtime.WindowsRuntime
$asTaskGeneric = ([System.WindowsRuntimeSystemExtensions].GetMethods() | ? { $_.Name -eq 'AsTask' -and $_.GetParameters().Count -eq 1 -and $_.GetParameters()[0].ParameterType.Name -eq 'IAsyncOperation`1' })[0]
Function Await($WinRtTask, $ResultType) {
    $asTask = $asTaskGeneric.MakeGenericMethod($ResultType)
    $netTask = $asTask.Invoke($null, @($WinRtTask))
    $netTask.Wait(-1) | Out-Null
    $netTask.Result
}
Function AwaitAction($WinRtAction) {
    $asTask = ([System.WindowsRuntimeSystemExtensions].GetMethods() | ? { $_.Name -eq 'AsTask' -and $_.GetParameters().Count -eq 1 -and !$_.IsGenericMethod })[0]
    $netTask = $asTask.Invoke($null, @($WinRtAction))
    $netTask.Wait(-1) | Out-Null
}
$connectionProfile = [Windows.Networking.Connectivity.NetworkInformation,Windows.Networking.Connectivity,ContentType=WindowsRuntime]::GetInternetConnectionProfile()
$tetheringManager = [Windows.Networking.NetworkOperators.NetworkOperatorTetheringManager,Windows.Networking.NetworkOperators,ContentType=WindowsRuntime]::CreateFromConnectionProfile($connectionProfile)

# Be sure to include Ben N.'s await for IAsyncOperation:
# https://superuser.com/questions/1341997/using-a-uwp-api-namespace-in-powershell

# Check whether Mobile Hotspot is enabled
$tetheringManager.TetheringOperationalState

# Start Mobile Hotspot
Await ($tetheringManager.StartTetheringAsync()) ([Windows.Networking.NetworkOperators.NetworkOperatorTetheringOperationResult])

I've also put this batch file inside the startup folder located in "C:\Users\<USERNAME>\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup" so the Mobile Hotspot will turn on automatically upon Windows startup.

To toggle the Mobile Hotspot ON\OFF, I've modified the above answer (by Julius Hardt) to this:

[Windows.System.UserProfile.LockScreen,Windows.System.UserProfile,ContentType=WindowsRuntime] | Out-Null
Add-Type -AssemblyName System.Runtime.WindowsRuntime
$asTaskGeneric = ([System.WindowsRuntimeSystemExtensions].GetMethods() | ? { $_.Name -eq 'AsTask' -and $_.GetParameters().Count -eq 1 -and $_.GetParameters()[0].ParameterType.Name -eq 'IAsyncOperation`1' })[0]
Function Await($WinRtTask, $ResultType) {
    $asTask = $asTaskGeneric.MakeGenericMethod($ResultType)
    $netTask = $asTask.Invoke($null, @($WinRtTask))
    $netTask.Wait(-1) | Out-Null
    $netTask.Result
}
Function AwaitAction($WinRtAction) {
    $asTask = ([System.WindowsRuntimeSystemExtensions].GetMethods() | ? { $_.Name -eq 'AsTask' -and $_.GetParameters().Count -eq 1 -and !$_.IsGenericMethod })[0]
    $netTask = $asTask.Invoke($null, @($WinRtAction))
    $netTask.Wait(-1) | Out-Null
}

$connectionProfile = [Windows.Networking.Connectivity.NetworkInformation,Windows.Networking.Connectivity,ContentType=WindowsRuntime]::GetInternetConnectionProfile()
$tetheringManager = [Windows.Networking.NetworkOperators.NetworkOperatorTetheringManager,Windows.Networking.NetworkOperators,ContentType=WindowsRuntime]::CreateFromConnectionProfile($connectionProfile)

# Be sure to include Ben N.'s await for IAsyncOperation:
# https://superuser.com/questions/1341997/using-a-uwp-api-namespace-in-powershell

# Check whether Mobile Hotspot is enabled
$tetheringManager.TetheringOperationalState

# If Mobile Hotspot is on - turn it off.
if ($tetheringManager.TetheringOperationalState -eq 1){
    # Stop Mobile Hotspot
    Await ($tetheringManager.StopTetheringAsync()) ([Windows.Networking.NetworkOperators.NetworkOperatorTetheringOperationResult])
}
# If Mobile Hotspot is off - turn it on.
else{
    # Start Mobile Hotspot
    Await ($tetheringManager.StartTetheringAsync()) ([Windows.Networking.NetworkOperators.NetworkOperatorTetheringOperationResult])
}

The corresponding batch file:

@echo off
powershell.exe -encodedCommand WwBXAGkAbgBkAG8AdwBzAC4AUwB5AHMAdABlAG0ALgBVAHMAZQByAFAAcgBvAGYAaQBsAGUALgBMAG8AYwBrAFMAYwByAGUAZQBuACwAVwBpAG4AZABvAHcAcwAuAFMAeQBzAHQAZQBtAC4AVQBzAGUAcgBQAHIAbwBmAGkAbABlACwAQwBvAG4AdABlAG4AdABUAHkAcABlAD0AVwBpAG4AZABvAHcAcwBSAHUAbgB0AGkAbQBlAF0AIAB8ACAATwB1AHQALQBOAHUAbABsAA0ACgBBAGQAZAAtAFQAeQBwAGUAIAAtAEEAcwBzAGUAbQBiAGwAeQBOAGEAbQBlACAAUwB5AHMAdABlAG0ALgBSAHUAbgB0AGkAbQBlAC4AVwBpAG4AZABvAHcAcwBSAHUAbgB0AGkAbQBlAA0ACgAkAGEAcwBUAGEAcwBrAEcAZQBuAGUAcgBpAGMAIAA9ACAAKABbAFMAeQBzAHQAZQBtAC4AVwBpAG4AZABvAHcAcwBSAHUAbgB0AGkAbQBlAFMAeQBzAHQAZQBtAEUAeAB0AGUAbgBzAGkAbwBuAHMAXQAuAEcAZQB0AE0AZQB0AGgAbwBkAHMAKAApACAAfAAgAD8AIAB7ACAAJABfAC4ATgBhAG0AZQAgAC0AZQBxACAAJwBBAHMAVABhAHMAawAnACAALQBhAG4AZAAgACQAXwAuAEcAZQB0AFAAYQByAGEAbQBlAHQAZQByAHMAKAApAC4AQwBvAHUAbgB0ACAALQBlAHEAIAAxACAALQBhAG4AZAAgACQAXwAuAEcAZQB0AFAAYQByAGEAbQBlAHQAZQByAHMAKAApAFsAMABdAC4AUABhAHIAYQBtAGUAdABlAHIAVAB5AHAAZQAuAE4AYQBtAGUAIAAtAGUAcQAgACcASQBBAHMAeQBuAGMATwBwAGUAcgBhAHQAaQBvAG4AYAAxACcAIAB9ACkAWwAwAF0ADQAKAEYAdQBuAGMAdABpAG8AbgAgAEEAdwBhAGkAdAAoACQAVwBpAG4AUgB0AFQAYQBzAGsALAAgACQAUgBlAHMAdQBsAHQAVAB5AHAAZQApACAAewANAAoAIAAgACAAIAAkAGEAcwBUAGEAcwBrACAAPQAgACQAYQBzAFQAYQBzAGsARwBlAG4AZQByAGkAYwAuAE0AYQBrAGUARwBlAG4AZQByAGkAYwBNAGUAdABoAG8AZAAoACQAUgBlAHMAdQBsAHQAVAB5AHAAZQApAA0ACgAgACAAIAAgACQAbgBlAHQAVABhAHMAawAgAD0AIAAkAGEAcwBUAGEAcwBrAC4ASQBuAHYAbwBrAGUAKAAkAG4AdQBsAGwALAAgAEAAKAAkAFcAaQBuAFIAdABUAGEAcwBrACkAKQANAAoAIAAgACAAIAAkAG4AZQB0AFQAYQBzAGsALgBXAGEAaQB0ACgALQAxACkAIAB8ACAATwB1AHQALQBOAHUAbABsAA0ACgAgACAAIAAgACQAbgBlAHQAVABhAHMAawAuAFIAZQBzAHUAbAB0AA0ACgB9AA0ACgBGAHUAbgBjAHQAaQBvAG4AIABBAHcAYQBpAHQAQQBjAHQAaQBvAG4AKAAkAFcAaQBuAFIAdABBAGMAdABpAG8AbgApACAAewANAAoAIAAgACAAIAAkAGEAcwBUAGEAcwBrACAAPQAgACgAWwBTAHkAcwB0AGUAbQAuAFcAaQBuAGQAbwB3AHMAUgB1AG4AdABpAG0AZQBTAHkAcwB0AGUAbQBFAHgAdABlAG4AcwBpAG8AbgBzAF0ALgBHAGUAdABNAGUAdABoAG8AZABzACgAKQAgAHwAIAA/ACAAewAgACQAXwAuAE4AYQBtAGUAIAAtAGUAcQAgACcAQQBzAFQAYQBzAGsAJwAgAC0AYQBuAGQAIAAkAF8ALgBHAGUAdABQAGEAcgBhAG0AZQB0AGUAcgBzACgAKQAuAEMAbwB1AG4AdAAgAC0AZQBxACAAMQAgAC0AYQBuAGQAIAAhACQAXwAuAEkAcwBHAGUAbgBlAHIAaQBjAE0AZQB0AGgAbwBkACAAfQApAFsAMABdAA0ACgAgACAAIAAgACQAbgBlAHQAVABhAHMAawAgAD0AIAAkAGEAcwBUAGEAcwBrAC4ASQBuAHYAbwBrAGUAKAAkAG4AdQBsAGwALAAgAEAAKAAkAFcAaQBuAFIAdABBAGMAdABpAG8AbgApACkADQAKACAAIAAgACAAJABuAGUAdABUAGEAcwBrAC4AVwBhAGkAdAAoAC0AMQApACAAfAAgAE8AdQB0AC0ATgB1AGwAbAANAAoAfQANAAoADQAKACQAYwBvAG4AbgBlAGMAdABpAG8AbgBQAHIAbwBmAGkAbABlACAAPQAgAFsAVwBpAG4AZABvAHcAcwAuAE4AZQB0AHcAbwByAGsAaQBuAGcALgBDAG8AbgBuAGUAYwB0AGkAdgBpAHQAeQAuAE4AZQB0AHcAbwByAGsASQBuAGYAbwByAG0AYQB0AGkAbwBuACwAVwBpAG4AZABvAHcAcwAuAE4AZQB0AHcAbwByAGsAaQBuAGcALgBDAG8AbgBuAGUAYwB0AGkAdgBpAHQAeQAsAEMAbwBuAHQAZQBuAHQAVAB5AHAAZQA9AFcAaQBuAGQAbwB3AHMAUgB1AG4AdABpAG0AZQBdADoAOgBHAGUAdABJAG4AdABlAHIAbgBlAHQAQwBvAG4AbgBlAGMAdABpAG8AbgBQAHIAbwBmAGkAbABlACgAKQANAAoAJAB0AGUAdABoAGUAcgBpAG4AZwBNAGEAbgBhAGcAZQByACAAPQAgAFsAVwBpAG4AZABvAHcAcwAuAE4AZQB0AHcAbwByAGsAaQBuAGcALgBOAGUAdAB3AG8AcgBrAE8AcABlAHIAYQB0AG8AcgBzAC4ATgBlAHQAdwBvAHIAawBPAHAAZQByAGEAdABvAHIAVABlAHQAaABlAHIAaQBuAGcATQBhAG4AYQBnAGUAcgAsAFcAaQBuAGQAbwB3AHMALgBOAGUAdAB3AG8AcgBrAGkAbgBnAC4ATgBlAHQAdwBvAHIAawBPAHAAZQByAGEAdABvAHIAcwAsAEMAbwBuAHQAZQBuAHQAVAB5AHAAZQA9AFcAaQBuAGQAbwB3AHMAUgB1AG4AdABpAG0AZQBdADoAOgBDAHIAZQBhAHQAZQBGAHIAbwBtAEMAbwBuAG4AZQBjAHQAaQBvAG4AUAByAG8AZgBpAGwAZQAoACQAYwBvAG4AbgBlAGMAdABpAG8AbgBQAHIAbwBmAGkAbABlACkADQAKAA0ACgAjACAAQgBlACAAcwB1AHIAZQAgAHQAbwAgAGkAbgBjAGwAdQBkAGUAIABCAGUAbgAgAE4ALgAnAHMAIABhAHcAYQBpAHQAIABmAG8AcgAgAEkAQQBzAHkAbgBjAE8AcABlAHIAYQB0AGkAbwBuADoADQAKACMAIABoAHQAdABwAHMAOgAvAC8AcwB1AHAAZQByAHUAcwBlAHIALgBjAG8AbQAvAHEAdQBlAHMAdABpAG8AbgBzAC8AMQAzADQAMQA5ADkANwAvAHUAcwBpAG4AZwAtAGEALQB1AHcAcAAtAGEAcABpAC0AbgBhAG0AZQBzAHAAYQBjAGUALQBpAG4ALQBwAG8AdwBlAHIAcwBoAGUAbABsAA0ACgANAAoAIwAgAEMAaABlAGMAawAgAHcAaABlAHQAaABlAHIAIABNAG8AYgBpAGwAZQAgAEgAbwB0AHMAcABvAHQAIABpAHMAIABlAG4AYQBiAGwAZQBkAA0ACgAkAHQAZQB0AGgAZQByAGkAbgBnAE0AYQBuAGEAZwBlAHIALgBUAGUAdABoAGUAcgBpAG4AZwBPAHAAZQByAGEAdABpAG8AbgBhAGwAUwB0AGEAdABlAA0ACgANAAoAIwAgAEkAZgAgAE0AbwBiAGkAbABlACAASABvAHQAcwBwAG8AdAAgAGkAcwAgAG8AbgAgAC0AIAB0AHUAcgBuACAAaQB0ACAAbwBmAGYALgANAAoAaQBmACAAKAAkAHQAZQB0AGgAZQByAGkAbgBnAE0AYQBuAGEAZwBlAHIALgBUAGUAdABoAGUAcgBpAG4AZwBPAHAAZQByAGEAdABpAG8AbgBhAGwAUwB0AGEAdABlACAALQBlAHEAIAAxACkAewANAAoAIAAgACAAIAAjACAAUwB0AG8AcAAgAE0AbwBiAGkAbABlACAASABvAHQAcwBwAG8AdAANAAoAIAAgACAAIABBAHcAYQBpAHQAIAAoACQAdABlAHQAaABlAHIAaQBuAGcATQBhAG4AYQBnAGUAcgAuAFMAdABvAHAAVABlAHQAaABlAHIAaQBuAGcAQQBzAHkAbgBjACgAKQApACAAKABbAFcAaQBuAGQAbwB3AHMALgBOAGUAdAB3AG8AcgBrAGkAbgBnAC4ATgBlAHQAdwBvAHIAawBPAHAAZQByAGEAdABvAHIAcwAuAE4AZQB0AHcAbwByAGsATwBwAGUAcgBhAHQAbwByAFQAZQB0AGgAZQByAGkAbgBnAE8AcABlAHIAYQB0AGkAbwBuAFIAZQBzAHUAbAB0AF0AKQANAAoAfQANAAoAIwAgAEkAZgAgAE0AbwBiAGkAbABlACAASABvAHQAcwBwAG8AdAAgAGkAcwAgAG8AZgBmACAALQAgAHQAdQByAG4AIABpAHQAIABvAG4ALgANAAoAZQBsAHMAZQB7AA0ACgAgACAAIAAgACMAIABTAHQAYQByAHQAIABNAG8AYgBpAGwAZQAgAEgAbwB0AHMAcABvAHQADQAKACAAIAAgACAAQQB3AGEAaQB0ACAAKAAkAHQAZQB0AGgAZQByAGkAbgBnAE0AYQBuAGEAZwBlAHIALgBTAHQAYQByAHQAVABlAHQAaABlAHIAaQBuAGcAQQBzAHkAbgBjACgAKQApACAAKABbAFcAaQBuAGQAbwB3AHMALgBOAGUAdAB3AG8AcgBrAGkAbgBnAC4ATgBlAHQAdwBvAHIAawBPAHAAZQByAGEAdABvAHIAcwAuAE4AZQB0AHcAbwByAGsATwBwAGUAcgBhAHQAbwByAFQAZQB0AGgAZQByAGkAbgBnAE8AcABlAHIAYQB0AGkAbwBuAFIAZQBzAHUAbAB0AF0AKQANAAoAfQANAAoADQAKAA==

Answer 3

I can confirm @smallscript's winRT solution works. Running the script will either open/close hotspot connection depends on the current status (enabled to disabled and vice versa).

To complete his answer I will point out two additional things in order to compile the code:

• You must have Windows SDK installed(I used version 10.0.18362.0) to have the winRT library.
• You need to link the RuntimeObject.lib library to your project, otherwise you'll get unresolved external symbols (Using VS, Add the name to: Project -> Properties -> Linker -> Input -> Additional Dependencies)

Answer 4

Based on the PowerShell comment above,

Here are the WinRT code components for mix/match to accomplish the above tasks for WiFi Direct 2.0 HotSpot activities using C++ without dependencies on other tooling etc (they work on IoT Core, etc):

• Programmatically set the SSID and/or PassPhrase
• Programmatically query the current WiFi Direct 2.0 HotSpot status
• Programmatically turn on/off the WiFi Direct 2.0 HotSpot

#include <winrt/Windows.Networking.Connectivity.h>
#include <winrt/Windows.Networking.NetworkOperators.h>
namespace winrt { // /ZW embed in :<winrt> when `Windows` is ambiguously defined
  static void af_winrt_wifi_hotspot_test() {
    // start ms-settings:network-mobilehotspot
    init_apartment(); // apartment_type::multi_threaded
    auto connectionProfile { Windows::Networking::Connectivity::NetworkInformation::GetInternetConnectionProfile() };
    auto tetheringManager = Windows::Networking::NetworkOperators::NetworkOperatorTetheringManager::CreateFromConnectionProfile(connectionProfile);
    switch(tetheringManager.TetheringOperationalState()) {
      case Windows::Networking::NetworkOperators::TetheringOperationalState::Off: {
          auto ioAsync = tetheringManager.StartTetheringAsync();
          auto fResult = ioAsync.get();
        }
        break;
      case Windows::Networking::NetworkOperators::TetheringOperationalState::On: {
          auto ioAsync = tetheringManager.StopTetheringAsync();
          auto fResult = ioAsync.get();
        }
        break;
      case Windows::Networking::NetworkOperators::TetheringOperationalState::InTransition:
      default:
        break;
    }
    clear_factory_cache();
    uninit_apartment();
  }
}

Answer 5

The Hosted Network (which can be configured using the netsh wlan set hostednetwork ... command) and the "new" Mobile Hotspot use different technologies under the hood.

There's a WinRT API to control and configure the "new" mobile hotspot you're referring to. You can call it from PowerShell:

The following code snippet requires Ben N.'s await function for IAsyncOperation and IAsyncAction in PowerShell, which can be found here.

$connectionProfile = [Windows.Networking.Connectivity.NetworkInformation,Windows.Networking.Connectivity,ContentType=WindowsRuntime]::GetInternetConnectionProfile()
$tetheringManager = [Windows.Networking.NetworkOperators.NetworkOperatorTetheringManager,Windows.Networking.NetworkOperators,ContentType=WindowsRuntime]::CreateFromConnectionProfile($connectionProfile)

# Be sure to include Ben N.'s await for IAsyncOperation:
# https://superuser.com/questions/1341997/using-a-uwp-api-namespace-in-powershell

# Check whether Mobile Hotspot is enabled
$tetheringManager.TetheringOperationalState

# Start Mobile Hotspot
Await ($tetheringManager.StartTetheringAsync()) ([Windows.Networking.NetworkOperators.NetworkOperatorTetheringOperationResult])

# Stop Mobile Hotspot
Await ($tetheringManager.StopTetheringAsync()) ([Windows.Networking.NetworkOperators.NetworkOperatorTetheringOperationResult])

The NetworkOperatorTetheringManager class also allows you to set the SSID and the passphrase of your hotspot programmatically.

Answer 6

The Windows 10 mobile hotspot gets started by the Windows Mobile Hotspot Service (icssvc). Using Powershell:

Get the current state of the service:

get-service "icssvc"

Start the service:

start-service "icssvc"

Stop the service:

stop-service "icssvc"

If you want to configure the hotspot then thats another thing. You can Google "Configure Internet Connection Sharing with PowerShell" to get you started.

Answer 7

Turn on command - netsh wlan set hostednetwork mode=allow

Turn off command - netsh wlan set hostednetwork mode=disallow

-not tested-

Answer 8

I think the only solution at the moment is to setup an autohotkey script to click the button on start up. Windows +A, Shift Tab, down arrow, etc... I need this for a headless PC to allow wifi remote desktop.

Answer 9

By Using CMD. It is too Simple to turn PC as Hotspot. But you PC must have Hosted network supported, to check it out try this command

    @echo off
REM    Copyright (C) 2013  
REM    user49828
REM
REM    Batch file for creating Wifi Hotspot
if _%1_==_payload_  goto :payload

:getadmin
    echo %~nx0: elevating self
    set vbs=%temp%\getadmin.vbs
    echo Set UAC = CreateObject^("Shell.Application"^)                >> "%vbs%"
    echo UAC.ShellExecute "%~s0", "payload %~sdp0 %*", "", "runas", 1 >> "%vbs%"
    "%temp%\getadmin.vbs"
    del "%temp%\getadmin.vbs"
goto :eof

:payload
    echo %~nx0: running payload with parameters:
    echo %*
    echo ---------------------------------------------------
    cd /d %2
    shift
    shift
    rem put your code here
    rem e.g.: perl myscript.pl %1 %2 %3 %4 %5 %6 %7 %8 %9
    :start
@ECHO off
ECHO  Pleae select one of the options Programmed By Overflown.com  "user49828"
ECHO  --------------------------------------------------------------------------------------------------------------------------
ECHO  1 Hotspot settings
ECHO  2 Start Hotspot
ECHO  3 Stop  Hotspot
ECHO  --------------------------------------------------------------------------------------------------------------------------

SET /p option=Please enter one of the options:

if %option%==1  ( goto setup )      else set /a er=1
if %option%==2  ( goto start1 )      else set /a er=er+1
if %option%==3  ( goto stop )       else set /a er=er+1

:noOption
if %er% GEQ 3 ( 
Echo Error!
Echo Please enter a correct option
@pause
cls  
goto start
)

:setup
SET /p ssid=Please enter the Hotspot name:
SET /p key=Please enter the Hotspot password greater the 8 digits:
netsh wlan set hostednetwork mode=allow ssid=%ssid% key=%key% 
if %errorlevel%==0 (
ECHO Setup complete
)
@pause
cls  
goto start

:start1
netsh wlan start hostednetwork
@pause
cls  
goto start

:stop
netsh wlan stop hostednetwork
@pause
cls  
goto start
goto :eof