CODEWITHSUNDEEP
raspberry-piiptables
Darellon
Darellon

Reputation: 372

Iptables NAT and Masquerade rules - what do they do?

i've followed a tutorial (in german) on setting up a WiFi Router (Access Point) on a Raspberry Pi. Following the tutorial i had to add the following iptable rules:

iptables -A FORWARD -o eth0 -i wlan0 -m conntrack --ctstate NEW -j ACCEPT
iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

Unfortunately i dont have any experience with iptables and would like to know what the rules mean/do?

Upvotes: 4

Views: 19768

Answers (1)

Ariel Otilibili
Ariel Otilibili

Reputation: 280

I go through the rules, and explain each at once: for understanding the flow, refer to the iptables chart

iptables -A FORWARD -o eth0 -i wlan0 -m conntrack --ctstate NEW -j ACCEPT

In the FORWARD chain, you appended a rule which says: if any packet comes newly, from wlan0 to eth0, the filter lets it pass, and tracks that connection as NEW (which means: follows its change of state).

iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

For any packets coming, tracked as ESTABLISHED or RELATED, the filter lets it pass

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

For the NAT table (which contains the FORWARD chain), in the POSROUTING chain, any packet leaving eth0 forgets its inner IP address (so, stays behind a NAT), and gets the one of eth0: MASQUERADE stands for masking the address.

Upvotes: 7

Related Questions