CODEWITHSUNDEEP
octaveshogun
Ryan DeRose
Ryan DeRose

Reputation: 11

How do I make Octave see installed Shogun libraries in Ubuntu 16.04?

I copied the commands (from these instructions: http://www.shogun-toolbox.org/install#ubuntu) into the terminal and they seem to have worked, but there is no documentation on how to make Octave find the libraries. I have tried modshogun and init_shogun but Octave cannot find them. I do have the libraries in usr/lib, and I have put that directory on PATH. I have even set usr/lib as my working directory in Octave and that did not help. As far as I have found, there is no Shogun documentation on what to do at this point.

I have also tried compiling Shogun from source, but configure couldn't find GCC. Apparently, this is a known problem with newer versions of GCC. I decided to ask for help with the former method because at least I have the libraries with that.

Edit: I am following the instructions here http://www.shogun-toolbox.org/install#manual-basics

When i do cd build and then "cmake -DINTERFACE_OCTAVE=ON" it tells me there is no cmakelists.txt. There is one in in the above folder, but when I go to that directory and do "cmake -DINTERFACE_OCTAVE=ON" again, it tells me "Shogun can only be built with GPL codes if the source files are in /home/derose/shogun/src/shogun/src/gpl. Please download or disable with LICENSE_GPL_SHOGUN=OFF."

However, when I add -LICENSE_GPL_SHOGUN=OFF as an option, i get the error "CMake Error: The source directory "/home/derose/shogun/src/shogun/-LICENSE_GPL_SHOGUN=OFF" does not exist."

Upvotes: 0

Views: 220

Answers (1)

Andy
Andy

Reputation: 8091

You've linked to the Ubuntu install instructions. From there

These currently do contain the C++ library and Python bindings..

No word that this would include the GNU Octave binding. See below on the same page:

The native C++ interface is always included. The cmake options for building interfaces are -DINTERFACE_PYTHON=ON -DINTERFACE_R .. etc. For example, replace the cmake step above by cmake -DINTERFACE_PYTHON=ON...

So you have to grab the source and fire up cmake with something like -DINTERFACE_OCTAVE=ON

Steps to build the bleeding edge of shogun (the github repo) and the Octave interface:

git clone https://github.com/shogun-toolbox/shogun && cd shogun
git submodule update --init
mkdir build && cd build
cmake .. -DINTERFACE_OCTAVE=ON
make -j4

Upvotes: 1

Related Questions