git push --force-with-lease vs. --force

Question

I am trying to understand the difference between

git push --force

and

git push --force-with-lease

My guess is that the latter only pushes to the remote if the remote has commits that the local branch doesn't have?

Answer 1

TL;DR: --force-with-lease is similar to LL/SC in computer science.

As a non-native English speaker, I've always found the "lease" part in --force-with-lease difficult to understand. Yes, I do know what the word "lease" means—it's like a contract for apartments or other properties.

However, with my background in computer science, it’s much easier for me to think of --force-with-lease as akin to "Load-Link/Store-Conditional."

Answer 2

git push --force is destructive because it unconditionally overwrites the remote repository with whatever one have locally. git's push --force is strongly discouraged as it can destroy other commits already pushed to a shared repository. One of the most common causes of force pushes is when we're forced to rebase a branch.

For example.

We have a project with a feature branch that both Alice and Bob are going to work on. They both clone this repository and start work.

Alice initially completes her part of the feature, and pushes this up to the main repository. This is all well and good.

Bob also finishes his work, but before pushing it up he notices some changes had been merged into master. Wanting to keep a clean tree, he performs a rebase against the master branch. Of-course, when he goes to push this rebased branch it will be rejected. However not realising that Alice has already pushed her work, he performs a push --force. Unfortunately, this will erase all record of Alice's changes in the central repository.

The problem here is that when doing a force push Bob doesn’t know why his changes have been rejected, so he assumes that it’s due to the rebase, not due to Alice’s changes. This is why --force on shared branches is an absolute no-no; and with the central-repository workflow any branch can potentially be shared.

What --force-with-lease does is refuse to update a branch unless it is the state that we expect; i.e. nobody has updated the branch upstream. In practice this works by checking that the upstream ref is what we expect, because refs are hashes, and implicitly encode the chain of parents into their value.

Here is a good post regarding git push --force and git push --force-with-lease: –force considered harmful; understanding git’s –force-with-lease

Answer 3

• --force: Overwrites the remote branch with your local changes, regardless of any changes that others may have pushed. It’s risky because it can discard other people’s work.
• --force-with-lease: Overwrites the remote branch only if no one else has pushed changes since you last fetched. It’s safer because it prevents you from overwriting others’ changes.

Answer 4

Looking for an answer drawing from credible and/or official sources.

The "compare and swap" mentioned by torek in the comments and in his other answer is further illustrated by the sources of Git itself.

the latter only pushes to the remote if the remote does not have commits that the local branch doesn't have?

That feature was introduced in this commit (Dec. 2013, Git v1.8.5-rc0)

--force-with-lease will protect all remote refs that are going to be updated by requiring their current value to be the same as some reasonable default, unless otherwise specified;

For now, "some reasonable default" is tentatively defined as "the value of the remote-tracking branch we have for the ref of the remote being updated", and it is an error if we do not have such a remote-tracking branch.

So "lease" means:

"force-with-lease": You assume you took the lease on the ref when you fetched to decide what the rebased history should be, and you can push back only if the lease has not been broken.

"You assume you took the lease on the ref": So "lease" is used to describe a safety mechanism for force pushing changes to a remote repository.

When you fetch from a remote repository, you essentially get the latest state of the repository at that time. Think of this as taking a "snapshot" or a temporary "lease" on the repository's state.
The "lease" implies that you are aware of the repository's state as of the last fetch and are operating under the assumption that this state has not changed since.

When you use git push --force-with-lease, you are telling Git: "I want to force push my changes, but only if the remote repository is in the same state as my last fetch."
In other words, you can push your changes as long as no one else has pushed any updates to the remote repository since your last fetch.
If someone else has introduced changes to the remote repository (thereby "breaking the lease"), the push will be rejected. That helps prevent accidental overwriting of others' work.

The sources still mention "cas" ("compare and swap"):

• This option was originally called "cas" (for "compare and swap"), the name which nobody liked because it was too technical.
• The second attempt called it "lockref" (because it is conceptually like pushing after taking a lock) but the word "lock" was hated because it implied that it may reject push by others, which is not the way this option works.
• This round calls it "force-with-lease".
  You assume you took the lease on the ref when you fetched to decide what the rebased history should be, and you can push back only if the lease has not been broken.

So: "git push --force-with-lease vs. --force"

As I mentioned in "push --force-with-lease by default", Git 2.13 (Q2 2017) confirms that the option --force-with-lease can be ignored if a background process (like the ones you find in an IDE with a Git plugin) runs git fetch origin.
In that case, --force prevails.

As Pavlus adds in the comments:

it is not ignored per se, it is just now you have identical refs for local remote head and remote head, so --force-with-lease will behave correctly -- compare these two, and if in that interval of time between fetch and push, someone updated remote, it won't behave as --force, it will still fail.

---

Another difference: before Git 2.29 (Q4 2020), pushing a ref whose name contains a non-ASCII character with the "--force-with-lease" option did not work over smart HTTP protocol.
It would work with git push --force.

See commit cd85b44 (21 Jul 2020) by Brian m. Carlson (bk2204).
^{(Merged by Junio C Hamano -- gitster -- in commit c2796ac, 30 Jul 2020)}

remote-curl: make --force-with-lease work with non-ASCII ref names

^{Reported-by: Frej Bjon
Signed-off-by: brian m. carlson}

When we invoke a remote transport helper and pass an option with an argument, we quote the argument as a C-style string if necessary.
This is the case for the cas option, which implements the --force-with-lease command-line flag, when we're passing a non-ASCII refname.

However, the remote curl helper isn't designed to parse such an argument, meaning that if we try to use --force-with-lease with an HTTP push and a non-ASCII refname, we get an error like this:

error: cannot parse expected object name '0000000000000000000000000000000000000000"'  

Note the double quote, which get_oid has reminded us is not valid in an hex object ID.

Even if we had been able to parse it, we would send the wrong data to the server: we'd send an escaped ref, which would not behave as the user wanted and might accidentally result in updating or deleting a ref we hadn't intended.

Since we need to expect a quoted C-style string here, just check if the first argument is a double quote, and if so, unquote it.
Note that if the refname contains a double quote, then we will have double-quoted it already, so there is no ambiguity.

We test for this case only in the smart protocol, since the DAV-based protocol is not capable of handling this capability.
We use UTF-8 because this is nicer in our tests and friendlier to Windows, but the code should work for all non-ASCII refs.

While we're at it, since the name of the option is now well established and isn't going to change, let's inline it instead of using the #define constant.

---

Git 2.30 (Q1 2021) adds git push --force-if-includes

When a local branch that is based on a remote ref, has been rewound and is to be force pushed on the remote, "--force-if-includes" runs a check that ensures any updates to the remote-tracking ref that may have happened (by push from another repository) in-between the time of the last update to the local branch (via "git pull", for instance) and right before the time of push, have been integrated locally before allowing a forced update.

---

Does it mean that if I do fetch before pushing, then "force-with-lease" will happily overwrite the remote branch, even with other people's work in it? I wonder how well it plays with automatic fetching many IDEs do.

The --force-with-lease option is designed to protect against overwriting changes in the remote repository that you have not seen. When you use this option, Git checks that the remote branch has not changed since your last fetch. If the remote branch has been updated (e.g., by another collaborator's push), the --force-with-lease push will fail.

Automatic fetching by IDEs can lead to scenarios where you unintentionally overwrite changes made by others without reviewing them. This happens because your local view of the remote branch is kept up-to-date automatically, and --force-with-lease checks against this view.

So I would either deactivate the automatic fetch, or at least review the two branches (the current one, and its remote tracking counterpart) before making any force push (with lease or not).

Answer 5

Force-with-lease is not necessarily safe. It just works as Sylvie said.

One note: In git a branch is just a pointer on a commit. And commits point to zero or more parent commits. Even if you changed the branch entirely with a hard git reset and a forced push or a push with - - force-with-lease without wanting it, that's not necessarily a big problem.

You can use your local git reflog to see how your local tip on the branches (Where was HEAD at that time?) has changed and reset and push the branch again. Then you only lose new commits on the remote branch, but even they might be restored by the team members.

Answer 6

force overwrites a remote branch with your local branch.

--force-with-lease is a safer option that will not overwrite any work on the remote branch if more commits were added to the remote branch (by another team-member or coworker or what have you). It ensures you do not overwrite someone elses work by force pushing.

I think your general idea surrounding the command is correct. If the remote branch has the same value as the remote branch on your local machine- you will overwrite remote. If it doesn't have the same value- it indicates a change that someone else made to the remote branch while you were working on your code and thus will not overwrite any code. Obviously if there are additional commits in remote then the values won't be the same.

I just think of --force-with-lease as the option to use when I want to make sure I don't overwrite any teammates code. A lot of teams at my company use --force-with-lease as the default option for a fail-safe. Its unnecessary in most circumstances but will save you lots of headache if you happen to overwrite something that another person contributed to remote.

I'm sure you looked at the docs but there might be some more wordy explanation contained in here:

https://git-scm.com/docs/git-push

Answer 7

Assuming any pre-receive hooks on the server accept the push, this will always succeed:

git push --force

Whereas this runs a specific client-side check before proceeding:

git push --force-with-lease

You can run the specific check yourself manually. Here's the "lease-checking" algorithm:

1. Figure out your current branch.

2. Run git for-each-ref refs/remotes. Take note of the commit-id your git client thinks corresponds to the upstream state of your current branch.

E.g., if you are on branch "foo", take note of the commit-id associated with "refs/remotes/origin/foo".

3. Determine the actual commit-id of the remote branch on the upstream git server right now.

4. Only let the "git push" proceed if the commit-ids you extracted from step 2 and step 3 agree. In other words, only proceed if your local git clone's notion of upstream agrees with actual upstream.

There's a sad implication here: since git fetch updates all refs under "refs/remotes/origin/*" to their latest versions, this combination of commands is essentially identical to git push --force:

git fetch

# The command below behaves identically to "git push --force"
# if a "git fetch" just happened!

git push --force-with-lease

To work around this inherent weakness in git push --force-with-lease I try to never run git fetch. Instead I always run git pull --rebase whenever I need to sync with upstream, since git pull only updates a single ref under refs/remotes, keeping the "lease" of --force-with-lease useful.