CODEWITHSUNDEEP
pythonpython-3.6virtualenvwrapper
berkelem
berkelem

Reputation: 2115

virtualenvwrapper.sh crashes shell

I am following the install instructions for virtualenvwrapper, described here.

I have used pip install virtualenvwrapper and it installed at the path /home/.pyenv/shims/.

But when I run the command source /home/.pyenv/shims/virtualenvwrapper.sh the whole Konsole shuts down. I had previously put the command in the .bashrc file and almost broke Linux because the Konsole would crash immediately after opening.

I'm using Linux OpenSuse and Python version 3.6.0.

Any ideas what could be causing the crash?

Upvotes: 14

Views: 2281

Answers (9)

Terris
Terris

Reputation: 1019

I had this problem with ohmyzsh! on MacOS with pyenv installed using brew. I also use Warp but I don't think that's important.

If the ohmyzsh! virtualenvwrapper plugin is in your ~/.zshrc and this problem happens to you, zsh won't even start, which is bad news if zsh is your shell. Your best option is to open ~/.zshrc in a text editor and comment out the plugin - then you can open a zsh shell and either keep working without virtualenvwrapper or you can fix the issue.

As other posts have mentioned, this appears to have something to do with the version of virtualenvwrapper installed whichever Python installation you happen to be using.

The only solution I found was the following. It's a little heavy handed but it worked for me.

rm -rf ~/.pyenv
pyenv install 3.12.2 # Pick the version that you use the most
pip install virtualenvwrapper

In each directory that contains a virtual environment:

rm -rf .venv # Use the actual virtual environment directory

And rebuild the virtual environment

Upvotes: 0

l00sed
l00sed

Reputation: 51

In your ~/.bashrc or ~/.zshrc, putting:

export PYENV_VERSION="$(cat $HOME/.pyenv/version)"
source "$HOME/.pyenv/versions/$PYENV_VERSION/bin/virtualenvwrapper.sh"

works for me.

Upvotes: 0

Mutiev Fedor
Mutiev Fedor

Reputation: 51

I had this problem on Mac and I found that zsh crashes with line source ~/.pyenv/versions/$PYENV_VERSION/bin/virtualenvwrapper.sh if you not specified VIRTUALENVWRAPPER_PYTHON variable

So this's my .zshrc (or .bashrc) config for pyenv and virtualenvwrapper on fresh user

command -v pyenv >/dev/null || export PATH="$PYENV_ROOT/bin:$PATH"
eval "$(pyenv init -)"

export PYENV_VERSION="$(pyenv version-name)"
VIRTUALENVWRAPPER_PYTHON="$HOME/.pyenv/shims/python"


export WORKON_HOME=$HOME/.virtualenvs
export PROJECT_HOME=$HOME/Devel

source ~/.pyenv/versions/$PYENV_VERSION/bin/virtualenvwrapper.sh

# Tell pyenv-virtualenvwrapper to use pyenv when creating new Python environments
export PYENV_VIRTUALENVWRAPPER_PREFER_PYVENV="true"

# Set the pyenv shims to initialize
if command -v pyenv 1>/dev/null 2>&1; then
 eval "$(pyenv init -)"
fi

Upvotes: 2

Penelope Clearwater
Penelope Clearwater

Reputation: 21

To add to Sean's answer since I don't have enough reputation to add a comment, adding

export PYENV_VERSION="$(pyenv version-name)"
source ~/.pyenv/versions/$PYENV_VERSION/bin/virtualenvwrapper.sh

to your .bashrc (or .zshrc in my case) allows you to point to the correct virtualenvwrapper.sh even if you change python versions without hardcoding or grep

Upvotes: 2

Snowso
Snowso

Reputation: 5

I had a same problem, and I solved it by installing virtualenvwrapper with builtin python(e.g. /usr/bin/python3), not a pyenv python runtime, though the builtin one is not used in actual workspaces.

Upvotes: 0

Kevin Dalias
Kevin Dalias

Reputation: 336

Sean Combs' answer works for me, too. But I didn't want to hard code a specific python version, so I use grep to build the path to virtualenvwrapper.sh dynamically.

export VIRTUALENVWRAPPER_PYTHON=$HOME/.pyenv/shims/python
source $HOME/.pyenv/versions/$($VIRTUALENVWRAPPER_PYTHON -V 2>&1 | grep -Po '(?<=Python )(.+)')/bin/virtualenvwrapper.sh

Upvotes: 2

Sean Combs
Sean Combs

Reputation: 176

I found a solution.

source ~/.pyenv/versions/VERSION/bin/virtualenvwrapper.sh works every time.

You can't use the shims directory for some reason. Maybe since virtualenvwrapper was likely installed into the pyenv version directory. If you use the shims directory, that link could break when switching versions with pyenv. It's better to access it directly.

Upvotes: 13

berkelem
berkelem

Reputation: 2115

I have come across this problem several times now on different machines and while I don't fully understand why it happens, I have found a solution to the problem.

The problem seems to be due to mismatches in the python version being used and the pip version used to install virtualenvwrapper. I had been using the system install of python (2.7) but the pip version was for python 3.5.

To fix this, use the suggestion in this answer as follows:

python -m pip install virtualenvwrapper

Then you can source /path/to/virtualenvwrapper.sh and everything should work fine.

Upvotes: 3

Alan W.
Alan W.

Reputation: 379

I'm seeing the same thing on MacOS (10.12.6).

For me the .zshrc entry which closes/ends the terminal window is:

source $HOME/.pyenv/shims/virtualenvwrapper.sh

I also would like to know why this is occurring, and how to fix it.

Upvotes: 5

Related Questions