CODEWITHSUNDEEP
ubuntu-18.04arduino-ideavrdude
SF23
SF23

Reputation: 184

Arduino IDE not able to Upload Sketch (Ubuntu 18.04 LTS)

I've recently switched to a Linux Machine and tried to set up my Arduino IDE for a little project. Unfortunatly I get an error message when I try to upload my sketch to the Arduino (Uno R3).

User configuration file does not exist or is not a regular file,skipping. Using Port : /dev/ttyACM0
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: ser_open(): can't open device "/dev/ttyACM0": Permission denied
avrdude done. Thank you.

My user is part of the dialout group, and when I use avrdude manually evrything is fine. The error persits even when I change access permissions to rw-rw-rw-.

I tried to reinstall the IDE, to switch to an older version, to switch to a newer version, nothing worked so far.

The version I've currently installed is Arduino 1.8.5.

I would appreciate any kind of help. Thank's in advance.

Upvotes: 3

Views: 672

Answers (2)

Crim5on
Crim5on

Reputation: 26

Had a similar problem with the Arduino IDE 2.1.0 on Ubuntu 22.04 LTS. (Re)installing AVRDUDE helped.

sudo apt install avrdude

AVRDUDE is the program that downloads (flashes) the compiled code onto the AVR microcontroller that is the heart of the Arduino board. It seems like the Arduino IDE doesn't integrate or install AVRDUDE properly.

Upvotes: 0

CoolButNubeBioinformatician
CoolButNubeBioinformatician

Reputation: 399

Run the following commands in the terminal, it should work!

>>ls /dev/ttyACM0

>>sudo chmod a+rw /dev/ttyACM0

>>ls /dev/ttyACM0

Upvotes: 1

Related Questions