What is the difference between Q-learning and SARSA?

Question

Although I know that SARSA is on-policy while Q-learning is off-policy, when looking at their formulas it's hard (to me) to see any difference between these two algorithms.

According to the book Reinforcement Learning: An Introduction (by Sutton and Barto). In the SARSA algorithm, given a policy, the corresponding action-value function Q (in the state s and action a, at timestep t), i.e. Q(s_t, a_t), can be updated as follows

Q(s_t, a_t) = Q(s_t, a_t) + α*(r_t + γ*Q(s_t+1, a_t+1) - Q(s_t, a_t))

On the other hand, the update step for the Q-learning algorithm is the following

Q(s_t, a_t) = Q(s_t, a_t) + α*(r_t + γ*max_a Q(s_t+1, a) - Q(s_t, a_t))

which can also be written as

Q(s_t, a_t) = (1 - α) * Q(s_t, a_t) + α * (r_t + γ*max_a Q(s_t+1, a))

where γ (gamma) is the discount factor and r_t is the reward received from the environment at timestep t.

Is the difference between these two algorithms the fact that SARSA only looks up the next policy value while Q-learning looks up the next maximum policy value?

TLDR (and my own answer)

Thanks to all those answering this question since I first asked it. I've made a github repo playing with Q-Learning and empirically understood what the difference is. It all amounts to how you select your next best action, which from an algorithmic standpoint can be a mean, max or best action depending on how you chose to implement it.

The other main difference is when this selection is happening (e.g., online vs offline) and how/why that affects learning. If you are reading this in 2019 and are more of a hands-on person, playing with a RL toy problem is probably the best way to understand the differences.

One last important note is that both Suton & Barto as well as Wikipedia often have mixed, confusing or wrong formulaic representations with regards to the next state best/max action and reward:

r(t+1)

is in fact

r(t)

Answer 1

When I was learning this part, I found it very confusing too, so I put together the two pseudo-codes from R.Sutton and A.G.Barto hoping to make the difference clearer.

Blue boxes highlight the part where the two algorithms actually differ. Numbers highlight the more detailed difference to be explained later.

TL;NR:

|             | SARSA | Q-learning |
|:-----------:|:-----:|:----------:|
| Choosing A' |   π   |      π     |
| Updating Q  |   π   |      μ     |

where π is a ε-greedy policy (e.g. ε > 0 with exploration), and μ is a greedy policy (e.g. ε == 0, NO exploration).

1. Given that Q-learning is using different policies for choosing next action A' and updating Q. In other words, it is trying to evaluate μ (target policy) while following another policy π (behavior policy), so it's an off-policy algorithm.

2. In contrast, SARSA uses π all the time, hence it is an on-policy algorithm.

More detailed explanation:

1. The most important difference between the two is how Q is updated after each action. SARSA uses the Q' following a ε-greedy policy exactly, as A' is drawn from it. In contrast, Q-learning uses the maximum Q' over all possible actions for the next step. This makes it look like following a greedy policy with ε=0, i.e. NO exploration in this part.

2. However, when actually taking an action, Q-learning still uses the action taken from a ε-greedy policy. This is why "Choose A ..." is inside the repeat loop.

3. Following the loop logic in Q-learning, A' is still from the ε-greedy policy.

Answer 2

Both SARSA and Q-learnig agents follow e-greedy policy to interact with environment.

SARSA agent updates its Q-function using the next timestep Q-value with whatever action the policy provides(mostly still greedy, but random action also accepted). The policy being executed and the policy being updated towards are the same.

Q-learning agent updates its Q-function with only the action brings the maximum next state Q-value(total greedy with respect to the policy). The policy being executed and the policy being updated towards are different.

Hence, SARSA is on-policy, Q-learning is off-policy.

Answer 3

I didn't read any book just I see the implication of them q learning just focus on the (action grid) SARSA learning just focus on the (state to state) and observe the action list of s and s' and then update the (state to state grid)

Answer 4

The only difference between SARSA and Qlearning is that SARSA takes the next action based on the current policy while qlearning takes the action with maximum utility of next state

Answer 5

What is the difference mathematically?

As is already described in most other answers, the difference between the two updates mathematically is indeed that, when updating the Q-value for a state-action pair (S_t, A_t):

• Sarsa uses the behaviour policy (meaning, the policy used by the agent to generate experience in the environment, which is typically epsilon-greedy) to select an additional action A_t+1, and then uses Q(S_t+1, A_t+1) (discounted by gamma) as expected future returns in the computation of the update target.
• Q-learning does not use the behaviour policy to select an additional action A_t+1. Instead, it estimates the expected future returns in the update rule as max_A Q(S_t+1, A). The max operator used here can be viewed as "following" the completely greedy policy. The agent is not actually following the greedy policy though; it only says, in the update rule, "suppose that I would start following the greedy policy from now on, what would my expected future returns be then?".

---

What does this mean intuitively?

As mentioned in other answers, the difference described above means, using technical terminology, that Sarsa is an on-policy learning algorithm, and Q-learning is an off-policy learning algorithm.

In the limit (given an infinite amount of time to generate experience and learn), and under some additional assumptions, this means that Sarsa and Q-learning converge to different solutions / "optimal" policies:

• Sarsa will converge to a solution that is optimal under the assumption that we keep following the same policy that was used to generate the experience. This will often be a policy with some element of (rather "stupid") randomness, like epsilon-greedy, because otherwise we are unable to guarantee that we'll converge to anything at all.
• Q-Learning will converge to a solution that is optimal under the assumption that, after generating experience and training, we switch over to the greedy policy.

---

When to use which algorithm?

An algorithm like Sarsa is typically preferable in situations where we care about the agent's performance during the process of learning / generating experience. Consider, for example, that the agent is an expensive robot that will break if it falls down a cliff. We'd rather not have it fall down too often during the learning process, because it is expensive. Therefore, we care about its performance during the learning process. However, we also know that we need it to act randomly sometimes (e.g. epsilon-greedy). This means that it is highly dangerous for the robot to be walking alongside the cliff, because it may decide to act randomly (with probability epsilon) and fall down. So, we'd prefer it to quickly learn that it's dangerous to be close to the cliff; even if a greedy policy would be able to walk right alongside it without falling, we know that we're following an epsilon-greedy policy with randomness, and we care about optimizing our performance given that we know that we'll be stupid sometimes. This is a situation where Sarsa would be preferable.

An algorithm like Q-learning would be preferable in situations where we do not care about the agent's performance during the training process, but we just want it to learn an optimal greedy policy that we'll switch to eventually. Consider, for example, that we play a few practice games (where we don't mind losing due to randomness sometimes), and afterwards play an important tournament (where we'll stop learning and switch over from epsilon-greedy to the greedy policy). This is where Q-learning would be better.

Answer 6

Yes, this is the only difference. On-policy SARSA learns action values relative to the policy it follows, while off-policy Q-Learning does it relative to the greedy policy. Under some common conditions, they both converge to the real value function, but at different rates. Q-Learning tends to converge a little slower, but has the capabilitiy to continue learning while changing policies. Also, Q-Learning is not guaranteed to converge when combined with linear approximation.

In practical terms, under the ε-greedy policy, Q-Learning computes the difference between Q(s,a) and the maximum action value, while SARSA computes the difference between Q(s,a) and the weighted sum of the average action value and the maximum:

Q-Learning: Q(s_t+1,a_t+1) = max_aQ(s_t+1,a)

SARSA: Q(s_t+1,a_t+1) = ε·mean_aQ(s_t+1,a) + (1-ε)·max_aQ(s_t+1,a)

Answer 7

In Q-Learning

This is your: Q-Learning: Q(St,At) = Q(St,At) + a [ R(t+1) + discount * max Q(St+1,At) - Q(St,At) ]

should be changed to Q-Learning: Q(St,At) = Q(St,At) + a [ R(t+1) + discount * max Q(St+1,a) - Q(St,At) ]

As you said, you have to find the maximum Q-value for the update eq. by changing the a, Then you will have a new Q(St,At). CAREFULLY, the a that give you the maximum Q-value is not the next action. At this stage, you only know the next state (St+1), and before going to next round, you want to update the St by the St+1 (St <-- St+1).

For each loop;

• choose At from the St using the Q-value

• take At and observe Rt+1 and St+1

• Update Q-value using the eq.

• St <-- St+1

Until St is terminal

Answer 8

There's an index mistake in your formula for Q-Learning. Page 148 of Sutton and Barto's.

Q(st,at) <-- Q(st,at) + alpha * [r(t+1) + gamma * max Q(st+1,a) - Q(st,at) ]

The typo is in the argument of the max:

the indexes are st+1 and a, while in your question they are st+1 and at+1 (these are correct for SARSA).

Hope this helps a bit.