CODEWITHSUNDEEP
performancejmeterlistenerjmeter-5.0stress-testing
JustNatural
JustNatural

Reputation: 448

Determine that 95% of all the requests took no longer than 1 second and automatically stop the test if they did

I want to run a stress test by continuously increasing load until the response times become unacceptable. The condition that I need to check against is that 95% of all the requests take no longer than 1 second.

  1. Can I determine this dynamically at runtime and if yes, how?
  2. How can I stop the test when this condition is achieved?

I looked at the AutoStop Listener plugin, but it does not seem to have what I need for checking this condition.

Upvotes: 1

Views: 791

Answers (3)

Janesh Kodikara
Janesh Kodikara

Reputation: 1841

Updated the answer to fix a bug in the code and to improve the logging

This could be another solution.

enter image description here

  1. Initialize the properties. Add a SetUp Thread Group. Add a JSR223 Sampler to the SetUp Thread Group. Then add the following code to initialize the properties.
props.put("total_requests","0")
props.put("total_requests_exceeding_limit","0")
  1. Add a JSR223 Post Processor at the top level.

This will ensure the element is applied to all the samplers in the test plan

  1. Add the following parameters to the JSR223 Post Processor
${__P(stop_test_exceeding_percentile_error,true)}  ${__P(percentage_limit,95)} ${__P(response_time_limit_in_seconds,1)}
  1. Add the following script to the JSR223 Postprocessor.
long rampupTime=60000
long requestCountToStartChecking=50
long startTimeInMillis=vars.get("TESTSTART.MS").toLong()
long currentTimeInMillis = new Date().getTime()
long currentTestDurationInMillis=currentTimeInMillis-startTimeInMillis

log.info("currentTestDurationInMillis ${currentTestDurationInMillis}")

if(args[0].toBoolean() && currentTestDurationInMillis> rampupTime ){
    def total_requests_exceeding_limit=0
    def percentageOfRequestExceedingLimit=0
    
    int percentile_limit=args[1].toInteger()
    int response_time_limit_in_seconds=args[2].toInteger()
    
    long response_time_limit_in_milliseconds=response_time_limit_in_seconds*1000
    
    def totalRequests = props.get("total_requests").toInteger() + 1
    props.put("total_requests",totalRequests.toString())
    
    if(prev.getTime() > response_time_limit_in_milliseconds){
        total_requests_exceeding_limit= props.get("total_requests_exceeding_limit").toInteger() + 1
        percentageOfRequestExceedingLimit = ((total_requests_exceeding_limit/totalRequests)* 100).round()
        
        if (percentageOfRequestExceedingLimit> percentile_limit && totalRequests>requestCountToStartChecking) {
            log.info("Requests execeeding ${response_time_limit_in_milliseconds} has reached ${percentageOfRequestExceedingLimit}")
            log.info("Stopping the test")
            prev.setStopTest(true)
            log.info("Stopped the test")
        }
        props.put("total_requests_exceeding_limit",total_requests_exceeding_limit.toString())
        
    } else {
        total_requests_exceeding_limit= props.get("total_requests_exceeding_limit").toInteger()
        percentageOfRequestExceedingLimit = ( (total_requests_exceeding_limit/totalRequests)* 100).round()
        
    }

    log.info("totalRequests ${totalRequests} total_requests_exceeding_limit ${total_requests_exceeding_limit} percentageOfRequestExceedingLimit ${percentageOfRequestExceedingLimit} ")
} else {
    prev.setIgnore()
}
  1. The script will ignore the samplers during the ramp-up time. Rampup period should be set in the script at the moment
  2. The response time threshold, response percentage limit, etc can be configured through the properties/parameters
  3. The percentage will be checked after a predefined number of requests from the ramp-up time to avoid test stopping immediately when the first response time is greater than the configured value.
  4. The script can be improved further to wait for a pre-defined period with a response percentage exceeding the limit.
  5. Need to handle the synchronization issues. You can use Inter-Thread communication plugin to ensure the same values are not read by different threads.

Upvotes: 1

Dmitri T
Dmitri T

Reputation: 168157

The easiest is going for Taurus framework which provides flexible and powerful Pass/Fail Criteria subsystem

Example Taurus YAML file:

execution:
- scenario: simple

scenarios:
  simple:
    script: /path/to/your/test.jmx

reporting:
- module: passfail
  criteria:
  - p95.0>1s, stop as failed

In case if 95 percentile of all requests will exceed 1 second Taurus will stop the test and return non-zero exit status code which is kind of scripting/CI friendly approach.

In JMeter it is also possible with some JSR223 Scripting, you could periodically read the .jtl results file, calculate the percentile, check it against anticipated value, etc.

Upvotes: 2

Ori Marko
Ori Marko

Reputation: 58872

For stopping test if one sampler was above 1 second use Duration Assertion with 1000 ms

tests that each response was received within a given amount of time

You can stop test if assertion failed:

In Thread group select Stop Test/Stop Test Now under Action to be taken after a sampler error

Determines what happens if a sampler error occurs, either because the sample itself failed or an assertion failed

Upvotes: 0

Related Questions