Error: could not find function ... in R

Question

This is meant to be a FAQ question, so please be as complete as possible. The answer is a community answer, so feel free to edit if you think something is missing.

This question was discussed and approved on meta.

I am using R and tried some.function but I got following error message:

Error: could not find function "some.function"

This question comes up very regularly. When you get this type of error in R, how can you solve it?

Answer 1

The function that cannot be found may not be the function that is named. I ran into this error when using a function in module R/c.R that was defined in module R/a.R that was previously successfully used in R/b.R with the files sourced in a,b,c order. One of the parameters I was passing was a global. It in turn was set by a function. The function had a dependency that in turn had an error. Resolving the error in the dependency which was also defined in R/a.R resolved the error. This is one of those many cases where lazy evaluation leads to hard to debug situations. So, if the error seems non-sensical, take a hard look at the parameters and how they are getting set.

Answer 2

There are a few things you should check :

1. Did you write the name of your function correctly? Names are case sensitive.
2. Did you install the package that contains the function? install.packages("thePackage") (this only needs to be done once)
3. Did you attach that package to the workspace ? require(thePackage) (and check its return value) or library(thePackage) (this should be done every time you start a new R session)
4. Are you using an older R version where this function didn't exist yet?
5. Are you using a different version of the specific package? This could be in either direction: functions are added and removed over time, and it's possible the code you're referencing is expecting a newer or older version of the package than what you have installed.

If you're not sure in which package that function is situated, you can do a few things.

1. If you're sure you installed and attached/loaded the right package, type help.search("some.function") or ??some.function to get an information box that can tell you in which package it is contained.
2. find and getAnywhere can also be used to locate functions.
3. If you have no clue about the package, you can use findFn in the sos package as explained in this answer.
4. RSiteSearch("some.function") or searching with rdocumentation or rseek are alternative ways to find the function.

Sometimes you need to use an older version of R, but run code created for a newer version. Newly added functions (eg hasName in R 3.4.0) won't be found then. If you use an older R version and want to use a newer function, you can use the package backports to make such functions available. You also find a list of functions that need to be backported on the git repo of backports. Keep in mind that R versions older than R3.0.0 are incompatible with packages built for R3.0.0 and later versions.

Answer 3

Another problem, in the presence of a NAMESPACE, is that you are trying to run an unexported function from package foo.

For example (contrived, I know, but):

> mod <- prcomp(USArrests, scale = TRUE)
> plot.prcomp(mod)
Error: could not find function "plot.prcomp"

Firstly, you shouldn't be calling S3 methods directly, but lets assume plot.prcomp was actually some useful internal function in package foo. To call such function if you know what you are doing requires the use of :::. You also need to know the namespace in which the function is found. Using getAnywhere() we find that the function is in package stats:

> getAnywhere(plot.prcomp)
A single object matching ‘plot.prcomp’ was found
It was found in the following places
  registered S3 method for plot from namespace stats
  namespace:stats
with value

function (x, main = deparse(substitute(x)), ...) 
screeplot.default(x, main = main, ...)
<environment: namespace:stats>

So we can now call it directly using:

> stats:::plot.prcomp(mod)

I've used plot.prcomp just as an example to illustrate the purpose. In normal use you shouldn't be calling S3 methods like this. But as I said, if the function you want to call exists (it might be a hidden utility function for example), but is in a namespace, R will report that it can't find the function unless you tell it which namespace to look in.

Compare this to the following: stats::plot.prcomp The above fails because while stats uses plot.prcomp, it is not exported from stats as the error rightly tells us:

Error: 'plot.prcomp' is not an exported object from 'namespace:stats'

This is documented as follows:

pkg::name returns the value of the exported variable name in namespace pkg, whereas pkg:::name returns the value of the internal variable name.

Answer 4

You may be able to fix this error by name spacing :: the function call

comparison.cloud(colors = c("red", "green"), max.words = 100)

to

wordcloud::comparison.cloud(colors = c("red", "green"), max.words = 100)

Answer 5

I got the same, error, I was running version .99xxx, I checked for updates from help menu and updated My RStudio to 1.0x, then the error did not come

So simple solution, just update your R Studio

Answer 6

If you are using parallelMap you'll need to export custom functions to the slave jobs, otherwise you get an error "could not find function ".

If you set a non-missing level on parallelStart the same argument should be passed to parallelExport, else you get the same error. So this should be strictly followed:

parallelStart(mode = "<your mode here>", N, level = "<task.level>")
parallelExport("<myfun>", level = "<task.level>")

Answer 7

If this occurs while you check your package (R CMD check), take a look at your NAMESPACE.

You can solve this by adding the following statement to the NAMESPACE:

exportPattern("^[^\\\\.]")

This exports everything that doesn't start with a dot ("."). This allows you to have your hidden functions, starting with a dot:

.myHiddenFunction <- function(x) cat("my hidden function")

Answer 8

Rdocumentation.org has a very handy search function that - among other things - lets you find functions - from all the packages on CRAN, as well as from packages from Bioconductor and GitHub.

Answer 9

This error can occur even if the name of the function is valid if some mandatory arguments are missing (i.e you did not provide enough arguments).
I got this in an Rcpp context, where I wrote a C++ function with optionnal arguments, and did not provided those arguments in R. It appeared that optionnal arguments from the C++ were seen as mandatory by R. As a result, R could not find a matching function for the correct name but an incorrect number of arguments.

Rcpp Function : SEXP RcppFunction(arg1, arg2=0) {}
R Calls :
RcppFunction(0) raises the error
RcppFunction(0, 0) does not

Answer 10

I had the error

Error: could not find function some.function

happen when doing R CMD check of a package I was making with RStudio. I found adding

exportPattern(".")

to the NAMESPACE file did the trick. As a sidenote, I had initially configured RStudio to use ROxygen to make the documentation -- and selected the configuration where ROxygen would write my NAMESPACE file for me, which kept erasing my edits. So, in my instance I unchecked NAMESPACE from the Roxygen configuration and added exportPattern(".") to NAMESPACE to solve this error.

Answer 11

I can usually resolve this problem when a computer is under my control, but it's more of a nuisance when working with a grid. When a grid is not homogenous, not all libraries may be installed, and my experience has often been that a package wasn't installed because a dependency wasn't installed. To address this, I check the following:

1. Is Fortran installed? (Look for 'gfortran'.) This affects several major packages in R.
2. Is Java installed? Are the Java class paths correct?
3. Check that the package was installed by the admin and available for use by the appropriate user. Sometimes users will install packages in the wrong places or run without appropriate access to the right libraries. .libPaths() is a good check.
4. Check ldd results for R, to be sure about shared libraries
5. It's good to periodically run a script that just loads every package needed and does some little test. This catches the package issue as early as possible in the workflow. This is akin to build testing or unit testing, except it's more like a smoke test to make sure that the very basic stuff works.
6. If packages can be stored in a network-accessible location, are they? If they cannot, is there a way to ensure consistent versions across the machines? (This may seem OT, but correct package installation includes availability of the right version.)
7. Is the package available for the given OS? Unfortunately, not all packages are available across platforms. This goes back to step 5. If possible, try to find a way to handle a different OS by switching to an appropriate flavor of a package or switch off the dependency in certain cases.

Having encountered this quite a bit, some of these steps become fairly routine. Although #7 might seem like a good starting point, these are listed in approximate order of the frequency that I use them.