Reputation: 49553

How to 'grep' a continuous stream?

Is that possible to use grep on a continuous stream?

What I mean is sort of a tail -f <file> command, but with grep on the output in order to keep only the lines that interest me.

I've tried tail -f <file> | grep pattern but it seems that grep can only be executed once tail finishes, that is to say never.

Upvotes: 887

Answers (13)

F. Hauri - Give Up GitHub

Reputation: 70792

Coming some late on this question, considering this kind of work as an important part of monitoring job, here is my (not so short) answer...

Following logs using bash

1. Command `tail`

This command is a little more porewfull than read on already published answer

Difference between follow option tail -f and tail -F, from manpage:
```
   -f, --follow[={name|descriptor}]
          output appended data as the file grows;
...
   -F     same as --follow=name --retry
...
   --retry
          keep trying to open a file if it is inaccessible
```
This mean: by using -F instead of -f, tail will re-open file(s) when removed (on log rotation, for sample).
This is usefull for watching logfile over many days.

Ability of following more than one file simultaneously
I've already used:

tail -F /var/www/clients/client*/web*/log/{error,access}.log /var/log/{mail,auth}.log \
           /var/log/apache2/{,ssl_,other_vhosts_}access.log \
           /var/log/pure-ftpd/transfer.log

For following events through hundreds of files... (consider rest of this answer to understand how to make it readable... ;)

Using switches -n (Don't use -c for line buffering!).
By default tail will show 10 last lines. This can be tunned:
```
tail -n 0 -F file
```
Will follow file, but only new lines will be printed
```
tail -n +0 -F file
```
Will print whole file before following his progression.

2. Buffer issues when piping:

If you plan to filter ouptuts, consider buffering! See -u option for sed, --line-buffered for grep, or stdbuf command:

tail -F /some/files | sed -une '/Regular Expression/p'

Is (a lot more efficient than using grep) a lot more reactive than if you does'nt use -u switch in sed command.

tail -F /some/files |
    sed -une '/Regular Expression/p' |
    stdbuf -i0 -o0 tee /some/resultfile

3. Recent journaling system

On recent system, instead of tail -f /var/log/syslog you have to run journalctl -xf, in near same way...

journalctl -axf | sed -une '/Regular Expression/p'

But read man page, this tool was built for log analyses!

4. Integrating this in a bash script

Colored output of two files (or more)

Here is a sample of script watching for many files, coloring ouptut differently for 1st file than others:

#!/bin/bash

tail -F "$@" |
    sed -une "
        /^==> /{h;};
        //!{
            G;
            s/^\\(.*\\)\\n==>.*${1//\//\\\/}.*<==/\\o33[47m\\1\\o33[0m/;
            s/^\\(.*\\)\\n==> .* <==/\\o33[47;31m\\1\\o33[0m/;
            p;}"

They work fine on my host, running:

sudo ./myColoredTail /var/log/{kern.,sys}log

Interactive script

You may be watching logs for reacting on events?

Here is a little script playing some sound when some USB device appear or disappear, but same script could send mail, or any other interaction, like powering on coffe machine...

#!/bin/bash

exec {tailF}< <(tail -F /var/log/kern.log)
tailPid=$!

while :;do
    read -rsn 1 -t .3 keyboard
    [ "${keyboard,}" = "q" ] && break
    if read -ru $tailF -t 0 _ ;then
        read -ru $tailF line
        case $line in
            *New\ USB\ device\ found* ) play /some/sound.ogg ;;
            *USB\ disconnect* ) play /some/othersound.ogg ;;
        esac
        printf "\r%s\e[K" "$line"
    fi
done

echo
exec {tailF}<&-
kill $tailPid

You could quit by pressing Q key.

Upvotes: 4

tad

Reputation: 15684

Turn on grep's line buffering mode when using BSD grep (FreeBSD, Mac OS X etc.)

tail -f file | grep --line-buffered my_pattern

It looks like a while ago --line-buffered didn't matter for GNU grep (used on pretty much any Linux) as it flushed by default (YMMV for other Unix-likes such as SmartOS, AIX or QNX). However, as of November 2020, --line-buffered is needed (at least with GNU grep 3.5 in openSUSE, but it seems generally needed based on comments below).

Upvotes: 1554

user882786

Reputation: 37

you certainly won't succeed with

tail -f /var/log/foo.log |grep --line-buffered string2search

when you use "colortail" as an alias for tail, eg. in bash

alias tail='colortail -n 30'

you can check by type alias if this outputs something like tail isan alias of colortail -n 30. then you have your culprit :)

Solution:

remove the alias with

unalias tail

ensure that you're using the 'real' tail binary by this command

type tail

which should output something like:

tail is /usr/bin/tail

and then you can run your command

tail -f foo.log |grep --line-buffered something

Good luck.

Upvotes: -2

mebada

Reputation: 2378

you may consider this answer as enhancement .. usually I am using

tail -F <fileName> | grep --line-buffered  <pattern> -A 3 -B 5

-F is better in case of file rotate (-f will not work properly if file rotated)

-A and -B is useful to get lines just before and after the pattern occurrence .. these blocks will appeared between dashed line separators

But For me I prefer doing the following

tail -F <file> | less

this is very useful if you want to search inside streamed logs. I mean go back and forward and look deeply

Upvotes: 12

Christian Herr

Reputation: 59

sed would be a better choice (stream editor)

tail -n0 -f <file> | sed -n '/search string/p'

and then if you wanted the tail command to exit once you found a particular string:

tail --pid=$(($BASHPID+1)) -n0 -f <file> | sed -n '/search string/{p; q}'

Obviously a bashism: $BASHPID will be the process id of the tail command. The sed command is next after tail in the pipe, so the sed process id will be $BASHPID+1.

Upvotes: 4

user10584393

Reputation: 21

This one command workes for me (Suse):

mail-srv:/var/log # tail -f /var/log/mail.info |grep --line-buffered LOGIN  >> logins_to_mail

collecting logins to mail service

Upvotes: 2

Hans.Loven.work

Reputation: 108

Didn't see anyone offer my usual go-to for this:

less +F <file>
ctrl + c
/<search term>
<enter>
shift + f

I prefer this, because you can use ctrl + c to stop and navigate through the file whenever, and then just hit shift + f to return to the live, streaming search.

Upvotes: 7

Ken Williams

Reputation: 23975

If you want to find matches in the entire file (not just the tail), and you want it to sit and wait for any new matches, this works nicely:

tail -c +0 -f <file> | grep --line-buffered <pattern>

The -c +0 flag says that the output should start 0 bytes (-c) from the beginning (+) of the file.

Upvotes: 25

Dale C. Anderson

Reputation: 2460

In most cases, you can tail -f /var/log/some.log |grep foo and it will work just fine.

If you need to use multiple greps on a running log file and you find that you get no output, you may need to stick the --line-buffered switch into your middle grep(s), like so:

tail -f /var/log/some.log | grep --line-buffered foo | grep bar

Upvotes: 17

Irit Katriel

Reputation: 3564

I use the tail -f <file> | grep <pattern> all the time.

It will wait till grep flushes, not till it finishes (I'm using Ubuntu).

Upvotes: 135

Atif

Reputation: 29

Use awk(another great bash utility) instead of grep where you dont have the line buffered option! It will continuously stream your data from tail.

this is how you use grep

tail -f <file> | grep pattern

This is how you would use awk

tail -f <file> | awk '/pattern/{print $0}'

Upvotes: -4

XzKto

Reputation: 2502

I think that your problem is that grep uses some output buffering. Try

tail -f file | stdbuf -o0 grep my_pattern

it will set output buffering mode of grep to unbuffered.

Upvotes: 86

Caleb

Reputation: 5428

Yes, this will actually work just fine. Grep and most Unix commands operate on streams one line at a time. Each line that comes out of tail will be analyzed and passed on if it matches.