Reputation: 16811

Mongod complains that there is no /data/db folder

I am using my new mac for the first time today. I am following the get started guide on the mongodb.org up until the step where one creates the /data/db directory. btw, I used the homebrew route.

So I open a terminal, and I think I am at what you called the Home Directory, for when I do "ls", I see folders of Desktop Application Movies Music Pictures Documents and Library.

So I did a

mkdir -p /data/db

first, it says permission denied. I kept trying different things for half and hour and finally :

mkdir -p data/db

worked. and when I "ls", a directory of data and nested in it a db folder do exist.

then I fire up mongod and it complains about not finding data/db

Have I done something wrong?

Now I have done the

sudo mkdir -p /data/db

and when I do a "ls" I do see the data dir and the db dir. inside the db dir though, there is absolutely nothing in it and when I now run mongod

Sun Oct 30 19:35:19 [initandlisten] exception in initAndListen: 10309 Unable to create/open lock file: /data/db/mongod.lock errno:13 Permission denied Is a mongod instance already running?, terminating
Sun Oct 30 19:35:19 dbexit: 
Sun Oct 30 19:35:19 [initandlisten] shutdown: going to close listening sockets...
Sun Oct 30 19:35:19 [initandlisten] shutdown: going to flush diaglog...
Sun Oct 30 19:35:19 [initandlisten] shutdown: going to close sockets...
Sun Oct 30 19:35:19 [initandlisten] shutdown: waiting for fs preallocator...
Sun Oct 30 19:35:19 [initandlisten] shutdown: lock for final commit...
Sun Oct 30 19:35:19 [initandlisten] shutdown: final commit...
Sun Oct 30 19:35:19 [initandlisten] shutdown: closing all files...
Sun Oct 30 19:35:19 [initandlisten] closeAllFiles() finished
Sun Oct 30 19:35:19 [initandlisten] shutdown: removing fs lock...
Sun Oct 30 19:35:19 [initandlisten] couldn't remove fs lock errno:9 Bad file descriptor
Sun Oct 30 19:35:19 dbexit: really exiting now

EDIT Getting error message for

sudo chown mongod:mongod /data/db

chown: mongod: Invalid argument

Thanks, everyone!

Upvotes: 550

Answers (30)

marko-36

Reputation: 1486

Mongo can't find the data folder on an non-NTFS drive, which can result in the NonExistentPath.. error, so make sure the data drive is formatted using NTFS.

Upvotes: 0

antisuri

Reputation: 55

If you are getting mkdir: /data: Read-only file system for command sudo mkdir -p /data/db you may create the directory like this:

mkdir -p ~/data/db. notice the ~ sign please.

After that mongod --dbpath ~/data/db

Upvotes: 0

Gene

Reputation: 11267

Make sure there's enough Disk Space on your Linux instance.

Upvotes: 0

stacksonstacksonstacks

Reputation: 687

Mongodb when running mongod looks for ~/data/db folder in as a path for db in the root folder of your device.

I solved it by creating a ~/data folder by running mkdir ~/data

In the root folder check if data folder is there by typing ls. Then navigate to the data folder and double check pwd should give you /Users/username/data

Then run this command to create a mongodb db path sudo mongod --dbpath=/Users/username/data

This did it for me and when I ran mongod

Upvotes: 5

Wernfried Domscheit

Reputation: 59436

MongoDB can be confusing regarding the dbPath folder.

When you run mongod without dbpath then the default path is /data/db

However when you start it as a service, e.g. systemctl start mongod then it reads on configuration file, typially /etc/mongod.cfg and in this config file the defaults are

Platform	Package Manager	Default `storage.dbPath`
RHEL / CentOS and Amazon	yum	`/var/lib/mongo`
SUSE	zypper	`/var/lib/mongo`
Ubuntu and Debian	apt	`/var/lib/mongodb`
macOS	brew	`/usr/local/var/mongodb`

So, by accident your MongoDB tries to access different data folders depending on how you start the service.

Upvotes: 9

vhiktordom

Reputation: 173

If you are using Mac and running Catalina and Installed Mongodb via Homebrew what you have to do to start is just type this command and you are good to go.

brew services start mongodb-community

Upvotes: 12

arrangegrassseeds

Reputation: 87

Tilo has the answer that worked for me up until THIS:

sudo chown -R 126:135 /data/db

I had to use:

sudo chown -R $USER /data/db

Upvotes: 1

Jeremy Piednoel

Reputation: 406

Starting with MongoDB 4.4, the MongoDB Database Tools are now released separately from the MongoDB Server.

You need to download : https://www.mongodb.com/try/download/database-tools?tck=docs_databasetools

then you copy all the files into /usr/bin and all the command lines will be available.

Upvotes: 2

mtyson

Reputation: 8550

There is a really dumb way to create this problem, which I have pioneered:

1) leave your mongo install for a while 2) come back and the server is not running 3) attempt to start it, but don't use sudo this time 4) mongo can't find data/db/ because now its looking in the user home dir instead of su home dir

Yes, it is really dumb but if its been a while since you were on the system it can trip you up.

Short answer: make sure you run mongo with the same implied home directory

Upvotes: 0

blubberbo

Reputation: 4603

I just wanted to point out here that if you try this and you run into mkdir: /data/db: Read-only file system, please see this comment, which helped me: https://stackoverflow.com/a/58895373.

That way if anyone is on this answer and does Control F for "read only" they will see this

Upvotes: 10

Ericgit

Reputation: 7043

Create directory in the Root

sudo mkdir -p /data/db

Now change the Owner

sudo chown -R $USER /data

You're good to go!

mongod

instead of using sudo mongod, you don't need to put everythime password, but for the real project you should use sudo mongod, don't give permission to normal user!

Upvotes: 6

Mehedi Abdullah

Reputation: 838

This solution solves my problem

Make a directory as

sudo mkdir -p /data/db
That will make a directory named as db and than try to start with commands

sudo mongod

If you get another error or problem with starting mongod, You may find problem as

Failed to set up listener: SocketException: Address already in use If you find that another error than you have to kill the running process of mongod by typing to terminal as

ps ax | grep mongod
sudo kill ps_number

and find the mongod running port and kill the process. Another way is to make a specefic port when starting mongod as

sudo mongod --port 27018

Upvotes: 2

Cloudish123

Reputation: 879

I kept getting the following error when I tried to start mongodb.

"shutting down with code:100"

I was using the following command:

./mongod --dbpath=~/mongo-data

The fix for me was that I didn't need the "=" sign and this was causing the error. So I did

./mongod --dbpath ~/mongo-data

Just wanted to throw this out there because the error in no way specifies that this is the problem. I almost removed the contents of the ~/mongo-data directory to see if that helped. Glad I remembered that cli args sometimes do not use the "=" sign.

Upvotes: 3

Devendra Bhat

Reputation: 1219

Till this date I also used to think that we need to create that /data/db folder for starting mongod command.

But recently I tried to start mongod with service command and it worked for me and there was no need to create /data/db directory.

service mongod start

As to check the status of mongod you can run the following command.

service mongod status

Upvotes: 2

emrys57

Reputation: 6806

I did

brew install mongodb

on 2018-02-01 and that gave me mongodb version 3.6.2.

Prompted by the answer from orluke above, I tried just

$ brew services restart mongodb

and everything sprang into life. My mongoose.createConnection() call did what I wanted. The GUI MongoDB Compass, the community version, would connect. I used Compass to look at the local.startup_log collection. That had one document in, the log of me just starting the mongoDB service, and that had

cmdLine:Object
    config:"/usr/local/etc/mongod.conf"

and indeed there was such a file:

$ more /usr/local/etc/mongod.conf
systemLog:
  destination: file
  path: /usr/local/var/log/mongodb/mongo.log
  logAppend: true
storage:
  dbPath: /usr/local/var/mongodb
net:
  bindIp: 127.0.0.1

and there was a /usr/local/var/mongodb directory with lots of obscure files. So that seems to be how the installation works now.

I'm not sure if brew services restart sets the service to run at login. So I did

brew services stop mongodb
brew services start mongodb

and hoped that starts it again after reboot. And, indeed, it did. In fact, now, I think the right thing to do after the initial installation is

brew services start mongodb

and that should start the service and restart it after reboot.

Upvotes: 8

Tal Delbari

Reputation: 121

I had this problem with an existing Mongodb setup. I'm still not sure why it happened, but for some reason the Mongod process couldn't find the mongod.config file. Because it could not find the config file it tried to find the DB files in /data/db, a folder that didn't exist. However, the config file was still available so I made sure the process has permissions to the config file and run the mongod process with the --config flag as follows:

mongod --config /etc/mongod.conf

In the config file itself I had this setting:

storage:
  dbPath: /var/lib/mongodb

And this is how the process could find the real DB folder again.

Upvotes: 8

Tilo

Reputation: 33722

You created the directory in the wrong place

/data/db means that it's directly under the '/' root directory, whereas you created 'data/db' (without the leading /) probably just inside another directory, such as the '/root' homedirectory.

You need to create this directory as root

Either you need to use sudo , e.g. sudo mkdir -p /data/db

Or you need to do su - to become superuser, and then create the directory with mkdir -p /data/db

Note:

MongoDB also has an option where you can create the data directory in another location, but that's generally not a good idea, because it just slightly complicates things such as DB recovery, because you always have to specify the db-path manually. I wouldn't recommend doing that.

Edit:

the error message you're getting is "Unable to create/open lock file: /data/db/mongod.lock errno:13 Permission denied". The directory you created doesn't seem to have the correct permissions and ownership -- it needs to be writable by the user who runs the MongoDB process.

To see the permissions and ownership of the '/data/db/' directory, do this: (this is what the permissions and ownership should look like)

$ ls -ld /data/db/
drwxr-xr-x 4 mongod mongod 4096 Oct 26 10:31 /data/db/

The left side 'drwxr-xr-x' shows the permissions for the User, Group, and Others. 'mongod mongod' shows who owns the directory, and which group that directory belongs to. Both are called 'mongod' in this case.

If your '/data/db' directory doesn't have the permissions and ownership above, do this:

First check what user and group your mongo user has:

# grep mongo /etc/passwd
mongod:x:498:496:mongod:/var/lib/mongo:/bin/false

You should have an entry for mongod in /etc/passwd , as it's a daemon.

sudo chmod 0755 /data/db
sudo chown -R 498:496 /data/db    # using the user-id , group-id

You can also use the user-name and group-name, as follows: (they can be found in /etc/passwd and /etc/group )

sudo chown -R mongod:mongod /data/db

that should make it work..

In the comments below, some people used this:

sudo chown -R `id -u` /data/db
sudo chmod -R go+w /data/db

sudo chown -R $USER /data/db 
sudo chmod -R go+w /data/db

The disadvantage is that $USER is an account which has a login shell. Daemons should ideally not have a shell for security reasons, that's why you see /bin/false in the grep of the password file above.

Check here to better understand the meaning of the directory permissions:

http://www.perlfect.com/articles/chmod.shtml

Maybe also check out one of the tutorials you can find via Google: "UNIX for beginners"

Upvotes: 687

illcrx

Reputation: 814

In more current versions of MongoDB, I have 3.2.10, it is stored be default into

/var/lib/mongodb

Upvotes: 1

orluke

Reputation: 2051

To fix that error on OS X, I restarted and stopped the service: $ brew services restart mongodb $ brew services stop mongodb

Then I ran mongod --config /usr/local/etc/mongod.conf, and the problem was gone.

The error seemed to arise after upgrading the mongodb homebrew package.

Upvotes: 41

Gal Bracha

Reputation: 20011

Installing through brew on Mac where YOUR_USER_NAME and staff is the group

sudo mkdir -p /data/db
sudo chmod +x+r+w /data/db/
sudo touch /data/db/mongod.lock
sudo chown YOUR_USER_NAME:staff /data/db
sudo chmod +x+r+w /data/db/mongod.lock
sudo chown YOUR_USER_NAME:staff /data/db/mongod.lock

Upvotes: 24

Prakhar Agrawal

Reputation: 1022

Type "id" on terminal to see the available user ids you can give, Then simply type

"sudo chown -R idname /data/db"

This worked out for me! Hope this resolves your issue.

Upvotes: 1

Connor Leech

Reputation: 18824

Create the folder.

sudo mkdir -p /data/db/

Give yourself permission to the folder.

sudo chown `id -u` /data/db

Then you can run mongod without sudo. Works on OSX Yosemite

Upvotes: 79

Iman Mohamadi

Reputation: 6829

This works for me, found in comments:

sudo chown -R $USER /data/db

Upvotes: 94

loreii

Reputation: 398

If you run mongo without arguments it's assume you are running on the production machine so it's use the default locations.

for using your own database (dev or just a different one) :

./bin/mongod --dbpath ~/data/db

Upvotes: 27

whiny_nil

Reputation: 83

Just a quick note:

If you tried running mongod without changing the permissions first, you'll likely have a mongod.lock file (and some other files) in the /data/db directory. Even after you change the permissions for the /data/db directory to give access to your $USER, you'll continue to get the "Unable to create/open lock file: /data/db/mongod.lock errno:13 Permission denied" error. Run ls -al /data/db and you'll probably see that the permissions for the individual files are still set to root for user, not to your $USER. You should remove the mongod.lock file, and the others as well. Then when you run mongod again, everything should work, and you can verify that the file permissions match the directory permissions by running ls -al again.

Upvotes: 4

cloudberry

Reputation: 369

I got over this exact same problem by creating the /data/db folders with my window manager. I tried doing it though the terminal at first, and in order to create a folder in the root directory, I had to use sudo.

I just went to the root directory using Finder and created a new folder using 'New Folder'. Totally worked for me.

Note: I'm using OSX.

Upvotes: 6

jagough

Reputation: 1171

After getting the same error as Nik

chown: id -u: Invalid argument

I found out this apparently occurred from using the wrong type of quotation marks (should have been backquotes) Ubuntu Forums

Instead I just used

sudo chown $USER /data/db

as an alternative and now mongod has the permissions it needs.

Upvotes: 117

EhevuTov

Reputation: 20463

You're trying to create a directory you don't have root access to.

For testing mongodb, I just use a directory from my user directory like:

cd
mkdir -p temp/
mongod --dbpath .

This will make a mongo database in temp/ from your current working directory

Upvotes: 6

Justin Jenkins

Reputation: 27080

You need to create /data/db ... that is a directory called /data/ in your root (i.e. /) and subfolder in there called /db/ ...

You're getting permission errors becuase you need to use sudo to create a direcotry in your root dir in MacOS, sudo lets you run commands as an administrator.

So, run this instead ...

$ sudo mkdir -p /data/db

This will prompt you for a password, it's the same password you use to change system settings (that little dialog that opens when you try and change things in System Preferences for ecample), and likely the same as you use to login.

Upvotes: 5

Russell

Reputation: 12439

Your command will have created the directory structure in the current folder, not the root directory of your computer (which is what the missing / is).

The first command was right, but because you are trying to create a folder in /, which is a protected directory, you need to prefix it with sudo, which is short for "superuser do". You'll then be asked for your password.

So the full command would be:

$ sudo mkdir -p /data/db

Upvotes: 8

Mongod complains that there is no /data/db folder

Answers (30)

Related Questions