Reputation: 5393

WAMP error: Forbidden You don't have permission to access /phpmyadmin/ on this server

I am new to WAMP and I have just installed it today.

The setup went well and localhost seems to work, but when I try to access phpMyAdmin I get this error:

Forbidden
You don't have permission to access /phpmyadmin/ on this server.

Why do I get this permission access error with phpMyAdmin?

I am using Windows 7.

Upvotes: 287

Answers (30)

Promise Preston

Reputation: 29098

I had a similar issue. My Apache configuration file looked like this:

<VirtualHost *:80>
  ServerName  mywebsite.com
  ServerAlias www.mywebsite.com
  DocumentRoot "C:/wamp64/www/vtigercrm"
  <Directory "/"
    Options +Indexes +Includes +FollowSymLinks +MultiViews
      AllowOverride All
      Require all granted
  </Directory>
</VirtualHost>

Here's how I fixed it:

The issue was that I specified the Directory as "/" (that is root folder on my server) instead of "C:/wamp64/www/vtigercrm/", which is where I have my website files.

I modified my configuration this way:

<VirtualHost *:80>
  ServerName  mywebsite.com
  ServerAlias www.mywebsite.com
  DocumentRoot "C:/wamp64/www/vtigercrm"
  <Directory "C:/wamp64/www/myvtigercrm/"
    Options +Indexes +Includes +FollowSymLinks +MultiViews
      AllowOverride All
      Require all granted
  </Directory>
</VirtualHost>

And everything worked fine.

Upvotes: 1

REMITH

Reputation: 1107

Everyting I have tried. Finally I understood it was problem with the port change. So given proper port in httpd-vhosts.conf If anybody going though same problem, will be helpful.

<VirtualHost *:9999>
    ServerName localhost
    DocumentRoot c:/wamp64/www
    <Directory  "c:/wamp64/www/">
        Options +Indexes +Includes +FollowSymLinks +MultiViews
        AllowOverride All 
        require all granted
    </Directory>
</VirtualHost>

Upvotes: -1

siamak jalalvandi

Reputation: 55

after making your alias in wamp server follow this steps :

1- open wamp installation folder and open alias folder such as c:/wamp/alias

2- open phpMyAdmin.conf

3- change Require local to Require all granted

4- save file

5- for your aliases : open your alias config file such as test.conf in same folder

6- copy all content of Directory tag in phpMyAdmin.conf that are something such as below :

<Directory "c:/wamp/apps/phpmyadmin4.1.14/">
   Options Indexes FollowSymLinks MultiViews
   AllowOverride all
  <IfDefine APACHE24>
    Require all granted
  </IfDefine>
  <IfDefine !APACHE24>
    Order Deny,Allow
      Deny from all
      Allow from localhost ::1 127.0.0.1
      Allow from localhost
    </IfDefine>
  php_admin_value upload_max_filesize 128M
  php_admin_value post_max_size 128M
  php_admin_value max_execution_time 360
  php_admin_value max_input_time 360
</Directory>

8-in your alias config file paste number 5 copied texts instead of Directory tag.

9- restart your apachi server by clicking on restart all services .

that worked for me

Upvotes: -1

madx

Reputation: 7213

In WAMP 3.1.4 x64 I solved updating the file C:\wamp64\alias\phpmyadmin.conf from this:

Alias /phpmyadmin "c:/wamp64/apps/phpmyadmin4.8.3/"

<Directory "c:/wamp64/apps/phpmyadmin4.8.3/">
    Options +Indexes +FollowSymLinks +MultiViews
  AllowOverride all
  <ifDefine APACHE24>
        Require local
    </ifDefine>
    <ifDefine !APACHE24>
        Order Deny,Allow
    Deny from all
    Allow from localhost ::1 127.0.0.1
    </ifDefine>

# To import big file you can increase values
  php_admin_value upload_max_filesize 128M
  php_admin_value post_max_size 128M
  php_admin_value max_execution_time 360
  php_admin_value max_input_time 360
</Directory>

to this:

Alias /phpmyadmin "c:/wamp64/apps/phpmyadmin4.8.3/"

<Directory "c:/wamp64/apps/phpmyadmin4.8.3/">
    Options +Indexes +FollowSymLinks +MultiViews
  AllowOverride all
    Require all granted

# To import big file you can increase values
  php_admin_value upload_max_filesize 128M
  php_admin_value post_max_size 128M
  php_admin_value max_execution_time 360
  php_admin_value max_input_time 360
</Directory>

And finally restarting all WAMP services.

Upvotes: 2

Edu

Reputation: 2643

If WampServer works in the computer it is installed but not on another device in your network (e.g.: from your phone) with the 'You don't have permission to access on this server.' try the following.

1. Edit the httpd-vhosts.conf (C:\wamp64\bin\apache\apache2.4.33\conf\extra\httpd-vhosts.conf), so it looks like this:

<Directory "${INSTALL_DIR}/www/">
    Options +Indexes +Includes +FollowSymLinks +MultiViews
    AllowOverride All
    Require all granted
</Directory>

2. Edit the phpmyadmin.conf (C:\wamp64\alias\phpmyadmin.conf), so it looks like this:

<Directory "d:/wamp64/apps/phpmyadmin4.7.9/">
    Options +Indexes +FollowSymLinks +MultiViews
    AllowOverride all
        Order Deny,Allow
        Allow from all
        Require all granted

3. Restart WampServer services

Upvotes: 4

Ismael ozil

Reputation: 571

replace localhost with 127.0.0.1 in your URL, worked for me.

Upvotes: 1

Daniel

Reputation: 1179

Just edit the file "c:\wamp\alias\phpmyadmin.conf"

like this

<Directory "C:/wamp64/apps/phpmyadmin4.5.5.1/">
    Options Indexes FollowSymLinks MultiViews

    AllowOverride All
    Require all granted
</Directory>

Upvotes: 2

Akhil Thayyil

Reputation: 9413

Change the file content of c:\wamp\alias\phpmyadmin.conf to the following.

Note: You should set the Allow Directive to allow from your local machine for security purposes. The directive Allow from all is insecure and should be limited to your local machine.

<Directory "c:/wamp/apps/phpmyadmin3.4.5/">
    Options Indexes FollowSymLinks MultiViews
    AllowOverride all
        Order Deny,Allow
        Allow from all
</Directory>

Here my WAMP installation is in the c:\wamp folder. Change it according to your installation.

Previously, it was like this:

<Directory "c:/wamp/apps/phpmyadmin3.4.5/">
    Options Indexes FollowSymLinks MultiViews
    AllowOverride all
        Order Deny,Allow
    Deny from all
    Allow from 127.0.0.1
</Directory>

Modern versions of Apache 2.2 and up will look for a IPv6 loopback instead of a IPv4 loopback (your localhost).

The real problem is that wamp is binding to an IPv6 address. The fix: just add Allow from ::1 - Tiberiu-Ionuț Stan

<Directory "c:/wamp22/apps/phpmyadmin3.5.1/">
    Options Indexes FollowSymLinks MultiViews
    AllowOverride all
        Order Deny,Allow
    Deny from all
    Allow from localhost 127.0.0.1 ::1
</Directory>

This will allow only the local machine to access local apps for Apache.

Restart your Apache server after making these changes.

Upvotes: 373

barrakuda

Reputation: 11

In my case, using Wampserver 3 64bit version 3.0.0, the path to the phpmyadmin4.5.2 directory in the phpmyadmin.conf file was wrong. For some reason the apps directory is inside the scripts directory. So I entered the correct paths as shown below. Then you probably need to restart Apache and reload the page.

I changed:

Alias /phpmyadmin "C:/wamp64/apps/phpmyadmin4.5.2/"

<Directory "C:/wamp64/apps/phpmyadmin4.5.2/">
    Options Indexes FollowSymLinks MultiViews
  AllowOverride all
    Require local

# To import big file you can increase values
  php_admin_value upload_max_filesize 128M
  php_admin_value post_max_size 128M
  php_admin_value max_execution_time 360
  php_admin_value max_input_time 360
</Directory>

To:

Alias /phpmyadmin "C:/wamp64/scripts/apps/phpmyadmin4.5.2/"

<Directory "C:/wamp64/scripts/apps/phpmyadmin4.5.2/">
    Options Indexes FollowSymLinks MultiViews
  AllowOverride all
    Require local

# To import big file you can increase values
  php_admin_value upload_max_filesize 128M
  php_admin_value post_max_size 128M
  php_admin_value max_execution_time 360
  php_admin_value max_input_time 360
</Directory>

Upvotes: 0

MikeL

Reputation: 5621

I wanted to run my server online and not under localhost / 127.0.0.1 and had the forbidden message. I am running the WAMP 2.2 server (Apache 2.4.2 / PHP 5.4.3 / MySQL 5.5.24) on Windows 7 64 bit. What worked for me is the following:

Press the startup WAMP icon in the menu
Choose Apache folder
Choose the file httpd.conf
Under the Directory tab section (section with "# Online --> Require all granted" text), I had the "Require local" option which I changed to "Require all granted"
Restart all services of the WAMP

Again, it worked for me and from this thread I understand that there are many cases in which you may get the above error message so if mine does not work, try other solutions.

Good luck.

(I hope it helps someone like it helped me. I did not find any one of the solutions above working for me.)

Upvotes: 7

Seif Tml

Reputation: 2423

you can access through

http://127.0.0.1:PortNumber/

if you don't want to change config files

Upvotes: -2

Prabhagaran

Reputation: 3710

1.change D:\wamp\bin\apache\apache2.4.9\conf\httpd.conf near line 279

Require local 

 into 

Require all granted

2.change like this in D:\wamp\alias\phpmyadmin.conf from existing one

   <Directory "d:/wamp/apps/phpmyadmin4.1.14/">
       Options Indexes FollowSymLinks MultiViews
       AllowOverride all
       Require all granted
       Order Deny,Allow
       Allow from all
   </Directory>

3.Click to Restart All services in wamp.

4.Click put online in wamp.

5.Again Click to Restart All services in wamp.

Hope it Helps..

Upvotes: 6

Umesh Patil

Reputation: 4978

The simple solution to this would be to find phpmyadmin.conf file and then find below code inside it,

<Directory "c:/wamp/apps/phpmyadmin3.5.1/">

Options Indexes FollowSymLinks MultiViews

AllowOverride all

    Order Deny,Allow

Deny from all

Allow from 127.0.0.1

</Directory>

Change "Deny from all" to "Allow from all".

Follow below link to get better understanding on how to do it,

WAMP says Forbidden You don't have permission to access /phpmyadmin/ on this server Windows 7 or 8

Enjoy :)

Upvotes: 3

Srihari Karanth

Reputation: 2167

Even I faced the same issue with my domain. If I gave an IP address it was working. But with a domain name it was not.

Then I checked my DNS A record. The domain had multiple entries with different IP addresses assigned. I removed all the wrong values, and it worked. Just one more check list if anyone faces a similar issue.

Upvotes: 2

obesechicken13

Reputation: 833

In the newest version of WAMP I somehow had a "deny all" in my .htaccess file. If nothing else works, please check there too.

Upvotes: 0

guest

Reputation: 1

I had the same problem. The hosts file is corrupted! there were:

localhos 127.0.0.1

localhost 127.0.0.1

localhos 127.0.0.1
localhos 127.0.0.1

The result is that localhost is not defined.

Solution: edit the hosts file with admin rights and correct to only one entry:

localhost 127.0.0.1

Upvotes: 0

Quantum

Reputation: 1476

So all of these answers are basically the same one. They only address one idea: it has to be DNS related. Well, that is not the only part of this it turns out. After many changes, I was getting nowhere reading the next "same answer" hoping that it would just go my way.

What did the trick for me was to adjust my versions of Apache. I think what the deal was, is that the one of the configuration files get a path off or that the install due to IIS may have been messed up / or / or /etc. And so forcing a version change readdresses everything from your firewall to bad configurations.

In fact, when I switched back to Apache 2.4.2 it goes back to being a forbidden. And as soon as I go back to Apache 2.4.4 it comes back up. That rules out local network issues. I just wanted to point out that all of the answers here are the same and that I have been able to kill the forbidden by changing the Apache version.

Upvotes: 0

usama sulaiman

Reputation: 2019

I fixed that problem before. It can happen due to many reasons, so you can use some or all of the next steps (opening mentioned files using any text editor, like Notepad++).

If you install WAMP in C:\wamp

1- Open file C:\wamp\bin\apache\apache2.2.22\conf\httpd.conf

Note: you may have a different Apache version than Apache 2.2.22, so you need to write it instead.

Search for: Directory "C:/wamp/www/". You will find something similar to this:

<Directory "C:/wamp/www/">
   # maybe there is some comments here ...
    AllowOverride all
    Order Allow,Deny
    Allow from all
</Directory>

Be sure that Allow from all is exists and not outcommented.

2- Open file C:\wamp\alias\phpmyadmin.conf.

Make sure that

<Directory "C:/wamp/apps/phpmyadmin3.5.1/">
    Options Indexes FollowSymLinks MultiViews
    AllowOverride all
        Order Deny,Allow
    Deny from all
    Allow from 127.0.0.1  
</Directory>

Change Allow from 127.0.0.1 to Allow from all.

You can remove Deny from all or comment it out by adding # at the beginning of the line, but you have to make sure that Allow from all is the last line of code just before </Directory>.

Note: you may have a different version than phpMyAdmin 3.5.1.

To use localhost/phpmyadmin instead of 127.0.0.1/phpmyadmin:

Open file C:\wamp\bin\apache\apache2.2.22\conf\extra\httpd-vhosts.conf. Add the following at the end of it.

<VirtualHost *:80>
    DocumentRoot "C:/wamp/www"
    ServerName localhost
</VirtualHost>

Upvotes: 4

the_summer_bee

Reputation: 493

In my case, the problem was that the phpMyAdmin version was specified wrongly in the phpmyadmin.conf file. You may check that:

Go to wamp/apps/phpmyadmin3.x.x: notice the file name - what version you are currently using?
Open file wamp/alias/phpmyadmin.conf:

Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Allow from all

Check the first line (directory "c:/wamp/apps/phpmyadmin3.x.x/") is the file name exactly the same as your actual file name.

Make sure the directory file name is absolutely correct.

Upvotes: 1

Natwar Singh

Reputation: 2271

Change

Listen 80

Listen 127.0.0.1:80

in your httpd.conf file. It will bind Apache to a specific IP address and port.

Upvotes: 10

Micke

Reputation: 609

I just had the same problem. It turns out that my installation of Windows is using the IPv6 address ::1 instead of 127.0.0.1. To solve this, I opened httpd.conf and changed the following line:

Allow from 127.0.0.1

to:

Allow from 127.0.0.1 ::1

Now I can access the server through localhost. Whatever you do, don't remove the Deny from all from the line above, or anyone on your network can gain access to your web server (unless that's what you want of course).

Upvotes: 36

Mehul

Reputation: 2149

You have to just check whether your WAMP server is online or not.

To put your WAMP server online, follow these steps.

Go to your WAMP server notification icon (in the task bar).
Single click on the WAMP server icon.
Select last option from the menu, that is, Put Online
Your server will restart automatically (in the latest versions only). Otherwise, you have to restart your server manually.

And you are DONE...

Upvotes: 140

aeroson

Reputation: 1129

If your WAMP icon is not green try: Left Click WAMP Icon > MySQL > Services > Install Service

Upvotes: 0

ObiVanKaPudji

Reputation: 96

Check if you are logged in as root or user with privileges. Just to be sure, logout and login again with root/no-password.

Upvotes: 0

Refaat

Reputation: 107

In my case a WAMP server was installed before on my pc, so when installing the new one some files not overwritten, all you have to do in that case is to go to the C:\ and delete the whole WAMP folder then install it again.

Upvotes: 0

user2060451

Reputation: 2688

I tried to set up my password... And that's how I got locked out from localhost. They should fix this...

Anyway, be careful with random advice. They all may or may not work. But some advice will lock you out even further. The one that worked for me:

Type "http://127.0.0.1/phpmyadmin/" in the address bar.

Then I discovered that http://localhost/phpmyadmin/ also works.

However, before that, out of desperation I had...

I deleted the files, I uninstalled WAMP, deleted temporary cookies, and installed WAMP again. It still doesn't accept "localhost" (and I am tired after a day trying to access WAMP), but the 127.0.0.1 and the localhost/phpmy... work. I am happy to see the page back. And start working again.

If you read this thread all the way to here means you are probably in a big problem... Windows 8, WAMP (wampserver 2.2). I wonder what it needs to get back access to localhost.

Upvotes: 0