CODEWITHSUNDEEP
powershell
Scott Langham
Scott Langham

Reputation: 60351

What's the difference between "Write-Host", "Write-Output", or "[console]::WriteLine"?

There are a number of different ways to output messages. What is the effective difference between outputting something via Write-Host, Write-Output, or [console]::WriteLine?

I also notice that if I use:

write-host "count=" + $count

The + gets included in the output. Why's that? Shouldn't the expression be evaluated to produce a single concatenated string before it gets written out?

Upvotes: 222

Views: 308489

Answers (6)

Andy Arismendi
Andy Arismendi

Reputation: 52577

Write-Output should be used when you want to send data on in the pipe line, but not necessarily want to display it on screen. The pipeline will eventually write it to out-default if nothing else uses it first.

Write-Host should be used when you want to do the opposite.

[console]::WriteLine is essentially what Write-Host is doing behind the scenes.

Run this demonstration code and examine the result. 

function Test-Output {
    Write-Output "Hello World"
}

function Test-Output2 {
    Write-Host "Hello World" -foreground Green
}

function Receive-Output {
    process { Write-Host $_ -foreground Yellow }
}

#Output piped to another function, not displayed in first.
Test-Output | Receive-Output

#Output not piped to 2nd function, only displayed in first.
Test-Output2 | Receive-Output 

#Pipeline sends to Out-Default at the end.
Test-Output

You'll need to enclose the concatenation operation in parentheses, so that PowerShell processes the concatenation before tokenizing the parameter list for Write-Host, or use string interpolation

write-host ("count=" + $count)
# or
write-host "count=$count"

BTW - Watch this video of Jeffrey Snover explaining how the pipeline works. Back when I started learning PowerShell I found this to be the most useful explanation of how the pipeline works.

Upvotes: 306

Drew Noakes
Drew Noakes

Reputation: 310822

For usages of Write-Host, PSScriptAnalyzer produces the following diagnostic:

Avoid using Write-Host because it might not work in all hosts, does not work when there is no host, and (prior to PS 5.0) cannot be suppressed, captured, or redirected. Instead, use Write-Output, Write-Verbose, or Write-Information.

See the documentation behind that rule for more information. Excerpts for posterity:

The use of Write-Host is greatly discouraged unless in the use of commands with the Show verb. The Show verb explicitly means "show on the screen, with no other possibilities".

Commands with the Show verb do not have this check applied.

Jeffrey Snover has a blog post Write-Host Considered Harmful in which he claims Write-Host is almost always the wrong thing to do because it interferes with automation and provides more explanation behind the diagnostic, however the above is a good summary.

Upvotes: 9

Mike Twc
Mike Twc

Reputation: 2355

Regarding [Console]::WriteLine() - you should use it if you are going to use pipelines in CMD (not in powershell). Say you want your ps1 to stream a lot of data to stdout, and some other utility to consume/transform it. If you use Write-Host in the script it will be much slower.

Upvotes: 0

FarmerBob
FarmerBob

Reputation: 1354

Here's another way to accomplish the equivalent of Write-Output. Just put your string in quotes:

"count=$count"

You can make sure this works the same as Write-Output by running this experiment:

"blah blah" > out.txt

Write-Output "blah blah" > out.txt

Write-Host "blah blah" > out.txt

The first two will output "blah blah" to out.txt, but the third one won't.

"help Write-Output" gives a hint of this behavior:

This cmdlet is typically used in scripts to display strings and other objects on the console. However, because the default behavior is to display the objects at the end of a pipeline, it is generally not necessary to use the cmdlet.

In this case, the string itself "count=$count" is the object at the end of a pipeline, and is displayed.

Upvotes: 17

tom
tom

Reputation: 85

From my testing Write-Output and [Console]::WriteLine() perform much better than Write-Host.

Depending on how much text you need to write out this may be important.

Below if the result of 5 tests each for Write-Host, Write-Output and [Console]::WriteLine().

In my limited experience, I've found when working with any sort of real world data I need to abandon the cmdlets and go straight for the lower level commands to get any decent performance out of my scripts.

measure-command {$count = 0; while ($count -lt 1000) { Write-Host "hello"; $count++ }}

1312ms
1651ms
1909ms
1685ms
1788ms


measure-command { $count = 0; while ($count -lt 1000) { Write-Output "hello"; $count++ }}

97ms
105ms
94ms
105ms
98ms


measure-command { $count = 0; while ($count -lt 1000) { [console]::WriteLine("hello"); $count++ }}

158ms
105ms
124ms
99ms
95ms

Upvotes: 3

KFL
KFL

Reputation: 17850

Apart from what Andy mentioned, there is another difference which could be important - write-host directly writes to the host and return nothing, meaning that you can't redirect the output, e.g., to a file.

---- script a.ps1 ----
write-host "hello"

Now run in PowerShell:

PS> .\a.ps1 > someFile.txt
hello
PS> type someFile.txt
PS>

As seen, you can't redirect them into a file. This maybe surprising for someone who are not careful.

But if switched to use write-output instead, you'll get redirection working as expected.

Upvotes: 32

Related Questions