Reputation: 9877
Short summary: How do I quickly calculate the finite convolution of two arrays?
I am trying to obtain the finite convolution of two functions f(x), g(x) defined by
To achieve this, I have taken discrete samples of the functions and turned them into arrays of length steps
:
xarray = [x * i / steps for i in range(steps)]
farray = [f(x) for x in xarray]
garray = [g(x) for x in xarray]
I then tried to calculate the convolution using the scipy.signal.convolve
function. This function gives the same results as the algorithm conv
suggested here. However, the results differ considerably from analytical solutions. Modifying the algorithm conv
to use the trapezoidal rule gives the desired results.
To illustrate this, I let
f(x) = exp(-x)
g(x) = 2 * exp(-2 * x)
the results are:
Here Riemann
represents a simple Riemann sum, trapezoidal
is a modified version of the Riemann algorithm to use the trapezoidal rule, scipy.signal.convolve
is the scipy function and analytical
is the analytical convolution.
Now let g(x) = x^2 * exp(-x)
and the results become:
Here 'ratio' is the ratio of the values obtained from scipy to the analytical values. The above demonstrates that the problem cannot be solved by renormalising the integral.
Is it possible to use the speed of scipy but retain the better results of a trapezoidal rule or do I have to write a C extension to achieve the desired results?
Just copy and paste the code below to see the problem I am encountering. The two results can be brought to closer agreement by increasing the steps
variable. I believe that the problem is due to artefacts from right hand Riemann sums because the integral is overestimated when it is increasing and approaches the analytical solution again as it is decreasing.
EDIT: I have now included the original algorithm 2 as a comparison which gives the same results as the scipy.signal.convolve
function.
import numpy as np
import scipy.signal as signal
import matplotlib.pyplot as plt
import math
def convolveoriginal(x, y):
'''
The original algorithm from http://www.physics.rutgers.edu/~masud/computing/WPark_recipes_in_python.html.
'''
P, Q, N = len(x), len(y), len(x) + len(y) - 1
z = []
for k in range(N):
t, lower, upper = 0, max(0, k - (Q - 1)), min(P - 1, k)
for i in range(lower, upper + 1):
t = t + x[i] * y[k - i]
z.append(t)
return np.array(z) #Modified to include conversion to numpy array
def convolve(y1, y2, dx = None):
'''
Compute the finite convolution of two signals of equal length.
@param y1: First signal.
@param y2: Second signal.
@param dx: [optional] Integration step width.
@note: Based on the algorithm at http://www.physics.rutgers.edu/~masud/computing/WPark_recipes_in_python.html.
'''
P = len(y1) #Determine the length of the signal
z = [] #Create a list of convolution values
for k in range(P):
t = 0
lower = max(0, k - (P - 1))
upper = min(P - 1, k)
for i in range(lower, upper):
t += (y1[i] * y2[k - i] + y1[i + 1] * y2[k - (i + 1)]) / 2
z.append(t)
z = np.array(z) #Convert to a numpy array
if dx != None: #Is a step width specified?
z *= dx
return z
steps = 50 #Number of integration steps
maxtime = 5 #Maximum time
dt = float(maxtime) / steps #Obtain the width of a time step
time = [dt * i for i in range (steps)] #Create an array of times
exp1 = [math.exp(-t) for t in time] #Create an array of function values
exp2 = [2 * math.exp(-2 * t) for t in time]
#Calculate the analytical expression
analytical = [2 * math.exp(-2 * t) * (-1 + math.exp(t)) for t in time]
#Calculate the trapezoidal convolution
trapezoidal = convolve(exp1, exp2, dt)
#Calculate the scipy convolution
sci = signal.convolve(exp1, exp2, mode = 'full')
#Slice the first half to obtain the causal convolution and multiply by dt
#to account for the step width
sci = sci[0:steps] * dt
#Calculate the convolution using the original Riemann sum algorithm
riemann = convolveoriginal(exp1, exp2)
riemann = riemann[0:steps] * dt
#Plot
plt.plot(time, analytical, label = 'analytical')
plt.plot(time, trapezoidal, 'o', label = 'trapezoidal')
plt.plot(time, riemann, 'o', label = 'Riemann')
plt.plot(time, sci, '.', label = 'scipy.signal.convolve')
plt.legend()
plt.show()
Thank you for your time!
Upvotes: 8
Views: 1631
Reputation: 9877
Short answer: Write it in C!
Using the cookbook about numpy arrays I rewrote the trapezoidal convolution method in C. In order to use the C code one requires three files (https://gist.github.com/1626919)
The code should run upon downloading by doing the following
performancemodule.c
.Run the following
python performancemodulesetup.py build python performancetest.py
You may have to copy the library file performancemodule.so
or performancemodule.dll
into the same directory as performancetest.py
.
The results agree neatly with one another as shown below:
The performance of the C method is even better than scipy's convolve method. Running 10k convolutions with array length 50 requires
convolve (seconds, microseconds) 81 349969
scipy.signal.convolve (seconds, microseconds) 1 962599
convolve in C (seconds, microseconds) 0 87024
Thus, the C implementation is about 1000 times faster than the python implementation and a bit more than 20 times as fast as the scipy implementation (admittedly, the scipy implementation is more versatile).
EDIT: This does not solve the original question exactly but is sufficient for my purposes.
Upvotes: 0
Reputation: 22897
or, for those who prefer numpy to C. It will be slower than the C implementation, but it's just a few lines.
>>> t = np.linspace(0, maxtime-dt, 50)
>>> fx = np.exp(-np.array(t))
>>> gx = 2*np.exp(-2*np.array(t))
>>> analytical = 2 * np.exp(-2 * t) * (-1 + np.exp(t))
this looks like trapezoidal in this case (but I didn't check the math)
>>> s2a = signal.convolve(fx[1:], gx, 'full')*dt
>>> s2b = signal.convolve(fx, gx[1:], 'full')*dt
>>> s = (s2a+s2b)/2
>>> s[:10]
array([ 0.17235682, 0.29706872, 0.38433313, 0.44235042, 0.47770012,
0.49564748, 0.50039326, 0.49527721, 0.48294359, 0.46547582])
>>> analytical[:10]
array([ 0. , 0.17221333, 0.29682141, 0.38401317, 0.44198216,
0.47730244, 0.49523485, 0.49997668, 0.49486489, 0.48254154])
largest absolute error:
>>> np.max(np.abs(s[:len(analytical)-1] - analytical[1:]))
0.00041657780840698155
>>> np.argmax(np.abs(s[:len(analytical)-1] - analytical[1:]))
6
Upvotes: 1