How do I fix the error 'Named Pipes Provider, error 40 - Could not open a connection to' SQL Server'?

Question

I can't seem to connect to my database from a site. I get this error:

Named Pipes Provider, error: 40 - Could not open a connection to SQL Server

I tried using the local IP address to connect as well as a public one. I've tried:

1. Yes, the site can communicate with the server
2. Named pipes/TCP is enabled.
3. Remote connections are allowed.
4. Windows Firewall is off
5. Created an exception for port 1433 in Windows Firewall.
6. Enabled everything in SQL Server Configuration Manager.

What else can I do here?

Answer 1

I tried using the local IP address to connect as well as a public one. I've tried:

Yes, the site can communicate with the server Named pipes/TCP is enabled. Remote connections are allowed. Windows Firewall is off Created an exception for port 1433 in Windows Firewall. Enabled everything in SQL Server Configuration Manager.

i ensured and did the above as well and I just want to share that the DOUBLE BACKSLASH

oBuilder.DataSource = "SPECIFICPCNAME\\SQLEXPRESS";

Using a SINGLE BACKSLASH resulted into a build error i.e.: Error 1 Unrecognized escape sequence

Answer 2

I have faced the same issue and I found that my machine name length was more than 15 characters so I edited it and made the machine name length less then 10 characters then resolved the issue.

Answer 3

It's a three step process really after installing SQL Server:

1. Enable Named Pipes SQL Config Manager --> SQL Server Network Config --> Protocols --> Named Pipes --> Right-click --> Restart

2. Restart the server SQL Config Manager --> SQL Server Services --> SQL Server (SQLEXPRESS) --> Right-click --> Restart

3. Use proper server and instance names (both are needed!) Typically this would be .\SQLEXPRESS, for example see the screenshot from QueryExpress connection dialog.

There you have it.

Answer 4

TL;DR: Your SQL Server instance is using dynamic ports due to which it is not working. Force the SQL Server service to use static port # 1433 to get it working.

Detailed Explanation: Before starting with the details, let us first understand the scenario in which this issue can occur.

Whenever we run SQL Server setup on a machine then it asks us to input the name of the service instance. Why it asks for it? The reason is that the SQL Server setup provides a facility through which you can install and run multiple instances of SQL Server service on the same machine. There can be variety of reasons due to which you may want to run multiple SQL Server service instances on the same box e.g. unavailability of more physical servers in your estate, isolating SQL Server instance failures, load balancing, etc. To differentiate between multiple instances on the same machine, you must give a unique name to each service instance. Have a look at my machine (Refer screenshot). I have only one service instance and it is the default service instance of SQL Server:

For each new instance that you setup via SQL Server installer, there will be a new row in this service console window with same SQL Server prefix in the Name column. Text in parenthesis (MSSQLSERVER) is the name of the service instance. To understand the naming convention of SQL Server service instances, please refer to the corollary section in the end of the answer.

So, if you have more than one instance of SQL Server service running on a given machine then this problem can occur. When you have two or more than two SQL Server instances running on the same box then there are two possible configurations:

1. Combination of default instance and one or more named instances
2. Combination of two or more named instances only i.e. no default instance. SQL Server setup does not mandates the installation of default instance if you wish to. I had followed this configuration on my server when I faced this issue.

Key concept: Each instance of Microsoft SQL Server service installed on a machine uses a different port to listen for incoming SQL connection requests. In other words each SQL Server service is a different process which is attached to a unique port number. Default instance of SQL Server uses port # 1433. As you install named instances then they will start using dynamic ports which is decided at the time of start-up of Windows service corresponding to named SQL Server instance.

My code was failing (with error code 40) to connect to the only named SQL Server instance that I had on my VM. You can try below possible solutions:

Solution # 1: Client code trying to connect to SQL Server instance takes help from SQL Server browser service to figure out port number at which your named instance is listening for incoming connections. Make sure SQL browser service is running on your computer.

Solution # 2: Check the port # (in yellow color) your named SQL Server instance is using from SQL Server configuration manager as shown in the snapshot below:

Use that port number explicitly in your connection string or with sqlcmd shown below:

sqlcmd -s mymachinename,11380 -i deleteDB.sql -o SQLDelete.txt

Solution # 3: Force your named instance to use port # 1433 which is used by the default instance otherwise. Remember this solution will work only if you do not have any default SQL Server instance running on as machine as the port # 1433 would be already in use. In any operating system, a given port number can never be used by two processes at the same time. At the end of day, our SQL Server service instance is also a process.

Set TCP Dynamic ports field to blank and TCP Port field to 1433.

Change the port number in your connection string as shown below:

sqlcmd -s mymachinename\instanceName -i deleteDB.sql -o SQLDelete.txt

OR

sqlcmd -s mymachinename,1433 -i deleteDB.sql -o SQLDelete.txt

Note: Please restart the SQL Server service instance after saving the TCP/IP settings.

Interestingly enough after resolving the error when I went back to dynamic port setting to reproduce the same error then it didn't happen. Not sure why.

Please read below interesting threads to know more about dynamic ports of SQL Server:

How to configure SQL Server Port on multiple instances?

When is a Dynamic Port “dynamic”?

When to use a TCP dynamic port and when TCP Port?

I got leads to solution of my problem from this blog.

Corollary: Name of a SQL Server instance follows below mentioned logic

1. For default instance, it is same as the name of the machine hosting the SQL Server service. It is predefined. It cannot be changed by the user during installation. Don't get confused by the suffix (MSSQLSERVER) present in the service name. It is an internally managed name relevant for server side only. Client side apps will never get to know that.

2. For named instance, it is a concatenated string in specific format as shown here - <name of the machine hosting the SQL Server service>\<user defined instance name>

   

Pro Tip: Default SQL Server instance can be connected via few alias names as well which are convenient to type and intuitive to remember. But alias names can be used only while you are trying to connect to the service instance from the service host machine itself. In such a scenario, in place of host name you can also use below mentioned alias names:

1. .
2. (local)

While connecting to the SQL Server service instance from a remote machine only standard names will work.

Answer 5

I had a different version of this issue when trying to connect Power BI desktop to a local developer instance of SQL Server 2019. I was using:

localhost:<port>

Changing it to:

hostname\servername

solved it for me. Possibly complicated by the fact I have 2 SQL Server installations on my machine on different ports.

Answer 6

I was getting this error on linked server which has gone offline. It was inside of a sql query, which was inside a dll, which was in another project, and in another language (VB). Copy your query into sql studio manager and run directly from there to see if this is your problem as well.

Answer 7

i Just enabled TCP/IP,VIA,Named Pipes in Sql Server Configuration manager , My problem got solved refer this for more info Resolving Named Pipes Error 40

Answer 8

If you tried restarting the MSSQLSERVER service, and it did not work, this might be a solution:

If you are using SQLExpress, your server name should be as the following ComputerName\SQLExpress. However, for SQLDeveloper, you do not have to right SQLDeveloper after your ComputerName.

Answer 9

Very simple solution

use (local)\InstanceName that's it. it worked for me.

Answer 10

If you are working with Asp.net core and using appsettings.json than write server as localhost and after write sql instance name for enabled named pipe like this

  "ConnectionString": {
    "dewDB": "server=localhost\\dewelopersql;database=dewdb;User ID=sa;password=XXXXX",
  },

Answer 11

open port number 1433 on your server for sql remote connection

Answer 12

I tried pretty much everything on this page but I had some underlying issues which were actually what needed to be resolved. I was unable to do certain things like open SQL Server Configuration Manager, which ended up being corrupt/missing WMI provider files.

There are lots of tedious ways to resolve this issues according to what I've read, but the tool from tweaking.com was able to remove and replace/repair my WMI (Windows Management Instrumentation) Provider files.

I used to do computer repair and overall the tweaking.com tool really impressed me, and it was suggested from one of the WMI error forum pages I went to.

After I fixed this issue I was able to connect to my SQL db, both locally and remotely.

Hope this helps someone.

Answer 13

You will find most likely your DB name is not correct, you will see the server name in VS like "DESKTOP-0I14BKI" but if you open up SSMS you will see DESKTOP-0I14BKI\SQLBLAHBLAH , simply add "\SQLBLAHBLAH" (instance name) to your "server name" in VS connection properties.

You will see:

To Fix:

Answer 14

I had the same problem. I use the MSSQL Server Management Studio 2017 and solved this problem using these steps:

1. Check for working fine SQL Server Services services or not.
2. Also check for working in good condition SQL Server (MSSQLSERVER).
3. Also check for working fine SQL Server Browser.
4. Restart SQL Server (MSSQLSERVER)

and fixed it.

Answer 15

For me it was a Firewall issue.

First you have to add the port (such as 1444 and maybe 1434) but also

C:\Program Files (x86)\Microsoft SQL Server\90\Shared\sqlbrowser.exe

and

%ProgramFiles%\Microsoft SQL Server\MSSQL12.SQLEXPRESS\MSSQL\Binn\SQLAGENT.EXE

The second time I got this issue is when I came back to the firewall, the paths were not correct and I needed to update form 12 to 13! Simply clicking on browse in the Programs and Services tab helped to realise this.

Finally, try running the command

EXEC xp_readerrorlog 0,1,"could not register the Service Principal Name",Null

For me, it returned the error reason

Answer 16

In my case, I opened SQL Server Management Studio and searched for SQLEXPRESS in my Database engine. It had two instances and I selected the correct one.

Answer 17

I had this issue but none of the suggestions above fixed it.

I was seeing this issue when I deployed my website to IIS. The fix was to go into advanced settings against the default app pool and change the identity property from the default to Administrator.

Answer 18

Try the following steps:

1. Open Services window (open "run box" and type services.msc).

2. Looking for SQL services (with SQL prefix).

3. Start them (if cannot start. Goto step 4).

4. Right_click to each service -> Properties -> Change to tab "Log on"-> choise log on as "Local ..." -> 0K. Then start SQL services again.

Try Open SQL and connect database.

Answer 19

I struggled for ages on this one before I realized my error - I had used commas instead of semicolons in the connect string

Answer 20

I have one more solution, I think. I recently had changed my computer name so, after I couldn't connect still after trying all above methods. I changed the Server name.. Server name => (browse for more) => under database engine, a new server was found same as computers new name. This worked, and life is good again.

Answer 21

I was trying to add a new connection in VS2015. None of the suggestions here worked. Suspecting some sort of a bug in the wizard, especially since SSMS was able to connect just fine, I decided to try and trick it. It worked!

1. Instead of adding the connection, use "Create new SQL Server Database". Enter your server name and a random name for the new DB, e.g. "test".

2. Assuming this succeeds, open Server Explorer in VS, locate the connection in Data Connections, right-click it and select Modify Connection.

3. Change "test" (from step 1) to the name of the existing database you want to connect to. Click "Test Connection". This time it should work!

4. Delete the temporary database you created in step 1.

Answer 22

I have suggested below steps to resolve your issue How do I fix the error 'Named Pipes Provider, error 40 - Could not open a connection to' SQL Server'

1. Check for working fine SQL Server Services services or not.
2. Also check for working in good condition SQL Server (MSSQLSERVER).
3. Also check for working fine SQL Server Browser.
4. Delete all earlier Aliases, now create new aliases as per your requirements.
5. Now check for working of SQL Server Default Port 1433
6. Next click on Client Protocols in instance, then click on TCP/IP, now click on mouse right click, open the Property, here you can make assure your working fine your default port SQL 1433.
7. Open your SQL Server Management Studio, then right click, click on "Property" option and then click on Connections tab, then finally tick for Allow remote Connections to this server.
8. Check for right working or your Ping IP Host.

Answer 23

A thread on MSDN Social, Re: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server, has a pretty decent list of possible issues that are related to your error. You may want to see if any of them could be what you're experiencing.

• Incorrect connection string, such as using SqlExpress
• Named Pipes(NP) was not enabled on the SQL instance
• Remote connection was not enabled
• Server not started, or point to not a real server in your connection string
• Other reasons such as incorrect security context
• try basic connectivity tests between the two machines you are working on

Answer 24

Solving this problem is very easy:

1. Go to control panel.
2. search for services.
3. Open Local services window from your search results
4. Restart your MSSQLSERVER service.

Screenshot of the steps:

Answer 25

I had the same problem and solved the problem by disabling my firewall(ESET).

The first step to solve this problem should be to try pinging your own computer from another computer. If you have firewall on, you may not be able to ping yourself. I tried pinging my own pc, then ping was failed(didnt get response from the server)

Answer 26

Open SQL Server Configuration Manager

1. Select SQL Server Services from right.
2. Find your server from right and go to its properties (with right click)
3. Change log on method to Local System.

Answer 27

Enable TCP/Ip , Piped Protocol by going to Computer Management ->SQL and Services, ensure the Service is On. Enbale the port on the Firewall. Try to login through Command Prompt -> as Admin; last the User Name should be (local)\SQLEXPRESS. Hope this helps.

Answer 28

in my case, i had a standalone server, i changed the sql server port default port 1433 in configuration manager to some number and restarted the sql serve service to take effect,i was able to connect to the sql server through management studio if i login to the server. but i was not able to connect from my local machine through sql server, i was getting the error:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and

that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 5)

I checked and verified all the below

-Named pipes/TCP is enabled. -Remote connections are allowed. -Windows Firewall is off -Created an exception for portin Windows Firewall( this was not necessary in my case as the server is in same subnet network). -Enabled everything in SQL Server Configuration Manager.

then i chnaged back the port number to default 1433 and restarted the sql server service, and the issue got resolved and i am able to connect the sql server from my local management studio.

Answer 29

I had just installed SQL SERVER 2012 developer. When I was creating my first SSIS package, I received this pipes error when I was trying to create a data connection task in SQL Server 2012 Data Tools in the Connection Manager box. I resolved with the help of the post above.

If choose a named instance and you call your named instance SSQDatabase1 and your pc's name is PCX1. You must enter PCX1\SSQDatabase1 not just SSQDatabase1 or you will receive the named pipes error.

Answer 30

After following all the steps mentioned here, if it still does not connect, try adding the DNS with the IP address in the hosts file in the etc folder. Adding an IP address instead of DNS name in the connection string should be a temporary solution to check if the connection actually works.