CODEWITHSUNDEEP
arduino
Violet
Violet

Reputation: 41

avrdude: stk500_recv():programmer is not responding

I bought a new Arduino Ethernet Shield and connect it to Arduino Uno. When I uploaded my code, I got the error avrdude: stk500_recv():programmer is not responding. Without the Ethernet Shield, it could run succeed. I have tried all the solutions on the Internet. Mac os 10.10.5 and Arduino 1.6.10. The board I chose is Arduino Uno and serial port is dev/cu.usbmodem1421. I have tried to reset and reinstall Arduino IDE，and downloaded FTDI driver. These solutions are not working.

Upvotes: 0

Views: 2971

Answers (1)

Muhammad Shees Kamal
Muhammad Shees Kamal

Reputation: 1

I think you are getting this error because one of these two problems.

  1. Maybe you are trying to upload program while your rx and tx pins are connected with other components.
  2. Or maybe your Arduino is bricked.

For the 1st problem solution is just disconnect wires rx,tx and try to upload the sketch. For 2nd problem use another Arduino to upload program on it(SPI connection). You can follow these steps to resolve your issue written in this article:Programmer is Not Responding Arduino - avrdude: stk500v2_getsync() | Solution

Upvotes: -1

Related Questions