Futex throughput on Linux

Question

I have an async API which wraps some IO library. The library uses C style callbacks, the API is C++, so natural choice (IMHO) was to use std::future/std::promise to build this API. Something like std::future<void> Read(uint64_t addr, byte* buff, uint64_t buffSize). However, when I was testing the implementation I saw that the bottleneck is the future/promise, more precisely, the futex used to implement promise/future. Since the futex, AFAIK, is user space and the fastest mechanism I know to sync two threads, I just switched to use raw futexes, which somewhat improved the situation, but not something drastic. The performance floating somewhere around 200k futex WAKEs per second. Then I stumbled upon this article - Futex Scaling for Multi-core Systems which quite matches the effect I observe with futexes. My questions is, since the futex too slow for me, what is the fastest mechanism on Linux I can use to wake the waiting side. I dont need anything more sophisticated than binary semaphore, just to signal IO operation completion. Since IO operations are very fast (tens of microseconds) switching to kernel mode not an option. Busy wait not an option too, since CPU time is precious in my case.

Bottom line, user space, simple synchronization primitive, shared between two threads only, only one thread sets the completion, only one thread waits for completion.

EDIT001: What if... Previously I said, no spinning in busy wait. But futex already spins in busy wait, right? But the implementation covers more general case, which requests global hash table, to hold the futexes, queues for all subscribers etc. Is it a good idea to mimic same behavior on some simple entity (like int), no locks, no atomics, no global datastructures and busy wait on it like futex already does?

Answer 1

In my experience, the bottleneck is due to linux's poor support for IPC. This probably isn't a multicore scaling issue, unless you have a large number of threads.

When one thread wakes another (by futex or any other mechanism), the system tries to run the 'wakee' thread immediately. But the waker thread is still running and using a core, so the system will usually put the wakee thread on a different core. If that core was previously idle, then the system will have to wake the core up from a power-down state, which takes some time. Any data shared between the threads must now be transferred between the cores.

Then, the waker thread will usually wait for a response from the wakee (it sounds like this is what you are doing). So it immediately goes to sleep, and puts its core to idle.

Then a similar thing happens again when the response comes. The continuous CPU wakes and migrations cause the slowdown. You may well discover that if you launch many instances of your process simultaneously, so that all your cores are busy, you see increased performance as the CPUs no longer have to wake up, and the threads may stop migrating between cores. You can get a similar performance increase if you pin the two threads to one core - it will do more than 1 million 'pings'/sec in this case.

So isn't there a way of saying 'put this thread to sleep and then wake that one'? Then the OS could run the wakee on the same core as the waiter? Well, Google proposed a solution to this with a FUTEX_SWAP api that does exactly this, but has yet to be accepted into the linux kernel. The focus now seems to be on user-space thread control via User Managed Concurrency Groups which will hopefully be able to do something similar. However at the time of writing this is yet to be merged into the kernel.

Without these changes to the kernel, as far as I can tell there is no way around this problem. 'You are on the fastest route'! UNIX sockets, TCP loopback, pipes all suffer from the same issue. Futexes have the lowest overhead, which is why they go faster than the others. (with TCP you get about 100k pings per sec, about half the speed of a futex impl). Fixing this issue in a general way would benefit a lot of applications/deployments - anything that uses connections to localhost could benefit.

(I did try a DIY approach where the waker thread pins the wakee thread to the same core that the waker is on, but if you don't want to to pin the waker, then every time you post the futex you need to pin the wakee to the current thread, and the system call to do this has too much overhead)