CODEWITHSUNDEEP
vhdlfpgaspartan
Pritesh
Pritesh

Reputation: 11

How to take samples using fpga?

I want to take samples of digital data coming externaly to FPGA spartan 3. I want to take 1000 samples/sec initially. How to select a clock frequency in vhdl coding?

Thanks.

Upvotes: 0

Views: 4070

Answers (3)

user1818839
user1818839

Reputation:

Do not use a counter to generate a lower frequency clock signal.

Multiple clock frequencies in an FPGA cause a variety of design problems, some of which come under the heading of "advanced topics" and, while they can (if necessary) all be dealt with and solved, learning how to use a single fast clock is both simpler and generally better practice (synchronous design).

Instead, use whatever fast clock your FPGA board provides, and generate lower frequency timing signals from it, and - crucially - use them as clock enables, not clock signals.

DLLs, DCMs, PLLs and other clock managers do have their uses, but generating 1 kHz clock signals is generally not a good use, even if their limitations permit it. This application is just crying out for a clock enable...

Also, don't mess around with magic numbers, let the VHDL compiler do the work! I have put the timing requirements in a package, so you can share them with the testbench and anything else that needs to use them.

package timing is

    -- Change the first two constants to match your system requirements...
    constant Clock_Freq  : real := 40.0E6;
    constant Sample_Rate : real := 1000.0;

    -- These are calculated from the above, so stay correct when you make changes
    constant Divide      : natural := natural(Clock_Freq / Sample_Rate);
    -- sometimes you also need a period, e.g. in a testbench.
    constant clock_period : time := 1 sec / Clock_Freq;

end package timing;

And we can write the sampler as follows: (I have split the clock enable out into a separate process to clarify the use of clock enables, but the two processes could be easily rolled into one for some further simplification; the "sample" signal would then be unnecessary)

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.numeric_std.all;
use work.timing.all;

entity sampler is
    Port (
        Clock   : in  std_logic;
        Reset   : in  std_logic;
        ADC_In  : in  signed(7 downto 0);   
        -- signed for audio, or unsigned, depending on your app
        Sampled : out signed(7 downto 0);   
    );
end sampler;

architecture Behavioral of Sampler is
    signal Sample : std_logic;
begin

    Gen_Sample : process (Clock,Reset) 
    variable Count : natural;
    begin
        if reset = '1' then
            Sample     <= '0';
            Count      := 0;
        elsif rising_edge(Clock) then
            Sample     <= '0';
            Count      := Count + 1;
            if Count = Divide then
                Sample <= '1';
                Count  := 0;
            end if;
        end if;
    end process;

    Sample_Data : process (Clock) 
    begin
        if rising_edge(Clock) then
            if Sample = '1' then
                Sampled <= ADC_In;
            end if;
        end if;
    end process;

end Behavioral;

Upvotes: 5

Morten Zilmer
Morten Zilmer

Reputation: 15934

The base clock must be based on an external clock, and can't be generated just through internal resources in a Spartan-3 FPGA. If required, you can use the Spartan-3 FPGA Digital Clock Manager (DCM) resources to scale the external clock. Synthesized VHDL code in itself can't generate a clock.

Once you have some base clock at a higher frequency, for example 100 MHz, you can easily divide this down to generate an indication at 1 kHz for sampling of the external input.

Upvotes: 2

FarhadA
FarhadA

Reputation: 883

It depends on what clock frequency you have available. If you have a 20MHz clock source, you need to divided it by 20000 in order to get 1KHz, you can do it in VHDL or use a DCM to do this.

This is from an example on how to create a 1kHz clock from a 20MHz input:

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;

entity clk20Hz is
    Port (
        clk_in : in  STD_LOGIC;
        reset  : in  STD_LOGIC;
        clk_out: out STD_LOGIC
    );
end clk200Hz;

architecture Behavioral of clk20Hz is
    signal temporal: STD_LOGIC;
    signal counter : integer range 0 to 10000 := 0;
begin
    frequency_divider: process (reset, clk_in) begin
        if (reset = '1') then
            temporal <= '0';
            counter <= 0;
        elsif rising_edge(clk_in) then
            if (counter = 10000) then
                temporal <= NOT(temporal);
                counter <= 0;
            else
                counter <= counter + 1;
            end if;
        end if;
    end process;

    clk_out <= temporal;
end Behavioral;

Upvotes: 1

Related Questions